installing skyline's *** taillights... HELP!!@$! NOW~
 

ok.. We got the carpet thin goff...
we are staring at the tail lights
ones on the outside...
they have plastic thing with wires attached to the taillights
maximadriver.com's instructions are that clear..
how are we supposed to take out the taillights?

After you take off the carpet, you'll see 4 long bolts facing into the car. Remove the nuts on those. Make sure you pull all the lights out of the taillights. Now the taillights are held on by this disgusting black goop. Just start pulling, pushing, whatever to get them off. The only thing other than that goop holding them on there is the bolts, once you've removed the nuts the taillights will slide out, you have have to put a lot of effort into it. Go slow, and it helps if you heat up the adhesive (black goop). It'll take a lot of force, but be careful where you apply it. Do not use a screwdriver on the side of the taillight to pry it out no matter how good of an idea it seems like, you'll scratch the paint and could crack the taillight.

take the nuts off and pull...well it's not that easy...your gonna need some patience, finesse, and brute strength....

re: skyline taillights
 

these fit on our cars? or how do you get them. this is something i really wanna do. someone let me know wut i can do. thank you
email me also:eek:

Re: re: skyline taillights
 

He made taillights that look like skyline tails out of Altezzas.

now how to get to the lights on the trunk?

you got them off? all you do is put them back through the holes, put on the nuts, and be done with them

I am talking about the tail lights on the trunk
I took the bolts out but it won't come out...
it's stuck ... how to get them off?

loosen all the bolts and pull straight out using a little force. there is some black adhesive seal the tail light to the trunk.

Damnit Man, do we have to come over there and do it for you?:p
The key words are Brute Force!

if you are a big puss, heat up the tail light to loosen up the adhesive....then get in the trunk and push out with your palm.

:idea: pics?

I didn't think it'll be hard to take out for the ones on the trunk
looks nice ^^

Like they all say, it takes brute force... I did it with no problems (150lbs all muscle!!!) :D

OK I think he got lost but I have the pics on vqpower.com under how 2's...4th gen...skyline tails

:D

if you have to tap the screws inside lightly with a small hammer to get it out, and the black stuff hardly held it at all

Go to VQpower.com and look up how-2s


or http://www.9cy.com/members/gtrrider/skylinetails.htm

Thank you Maxima GTR for the mirror site

nice pics, can we get some daytime pics? looks good. good job!:D

Looks nice! I'm gonna have to do that now.

thank you sir...might i say that they look tight...might consider doing them myself and compensate you for it:D

donate my friends and family members :D

hey sexima i REALLY dont mean to discount your efforts, it looks real clean and well done but i dont see the skyline resemblance really. its not your fault i dont see it- i jus think the max's *** is shaped different . its like one girl has a fat *** and one has a thinner *** and they both have a tattoo on it. theyre jus not the same. ANYWAY- I still think you did a good job - congrats!:)

well im glad that it doesn't look like a skyline
^^ It's a maxima!

well im glad that it doesn't look like a skyline
^^ It's a maxima!



:laugh: dont worry it looks good enough.thats a really good idea a litle risky but its very nice. i would personally just take them to a body shop.;)