Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   4th Generation Maxima (1995-1999) (https://maxima.org/forums/4th-generation-maxima-1995-1999-6/)
-   -   Errrgg...dash won't come apart... (https://maxima.org/forums/4th-generation-maxima-1995-1999/9273-errrgg-dash-wont-come-apart.html)

maxspeed5 12-03-2000 12:54 PM

or at least I can't make it. I need to re-route my cd changer control (previous owner stuck it on the dash and it is ugly as sin). I got around the sifter up, the ash tray out, but then the vents/clock would not come out. How much force do it need? Tried prying, pulling, and cursing it -- none worked. I know how to get it out (via Haynes manual and Crutchfeild), but am afraid if I force it too much that I will break it. Please help...

Daniel B. Martin 12-03-2000 01:00 PM


Originally posted by maxspeed5
or at least I can't make it. I need to re-route my cd changer control (previous owner stuck it on the dash and it is ugly as sin). I got around the sifter up, the ash tray out, but then the vents/clock would not come out. How much force do it need? Tried prying, pulling, and cursing it -- none worked. I know how to get it out (via Haynes manual and Crutchfeild), but am afraid if I force it too much that I will break it. Please help...
Try the Install Doctor at ...
http://www.installdr.com/

Click on Install it yourself.
Click on Nissan.
Click on Maxima.

[Edited by Daniel B. Martin on 12-03-2000 at 03:46 PM]

dch95 12-03-2000 01:11 PM

errrgg@*&%$?!
 
The vents,hazards,clock and defroster is all one panel. The climate control (A/C) panel is not part of that so don,t pull/pry on that part. I pulled the vents off by prying outwards at the point of the defrost switch or the hazard switch. I have a 95 gle so it should be the same. After that you should see that the stereo and A/C panel are screwed in.

NickStam 12-03-2000 06:13 PM

Re: errrgg@*&%$?!
 
See if this helps,

http://www.extremewinter.com/Nick/ma...ll_sheet_2.jpg

Nathan 12-03-2000 06:37 PM

To remove the upper part which houses the clock, warning signals, and vents you have to pull up on the below part which houses the coin, radio and a/c controls. The first time I tried to remove the dash I got fed up and tugged on the middle part and the top part just poped up. For more info click on my website to the left and look under shoptalk for pics. Good luck.

GarthG 12-03-2000 07:50 PM

To get the clock part of mine off I normally use the top of the little inlet for the clock to lift it up, then when it gets above the clips holding it in, I pull straight out. . . Works well for me.

maxspeed5 12-05-2000 01:37 PM

Thanks for all the info...
 
I will attempt it again this weekend...

Ryan93SE 12-05-2000 03:34 PM

i did this yesterday.....
 
you have to push down and toward you on the ac vents..then you will see two screws and the rest is easy.... it took me 8 hrs but everything is in and sounds great


All times are GMT -7. The time now is 08:27 AM.


© 2024 MH Sub I, LLC dba Internet Brands