co_maxima98

iTrader: (3)

I did a search and found installation instructions in one thread, and the installation of the clear tail lights does not look like a major problem. But I do have a question.

Who has the CustomMaxima.Com clear tail lights?

The instructions I found ( http://www.seas.ucla.edu/~cheston/rearlights.htm ) mentioned a "goo" that seals the lights into the car. My question is this... will the "goo" that seals the housing in the car reseal itself nice and tight, like the original lights were? Has anyone had any problems with water leaking into their trunk?

Also, other than "pushing the housing like you've never pushed before," the installation is pretty easy then?

ILoveMyMax

its too easy.. if u have the lights ur talking 5 mins..all u do is loosen the bolts unhook the wires apply pressure to the light pushing it, it may not move if ur not really string right away but it will just give eventually.. have a knife and just trim real quick trying not to get any on the car and put the other lights back in. if u do get some onthe car goo gone works like a charm. i did my own clears 5 bucks and 2 hours came our perfect. such a nice mod gl hope u like it.

ILoveMyMax

its too easy.. if u have the lights ur talking 5 mins..all u do is loosen the bolts unhook the wires apply pressure to the light pushing it, it may not move if ur not really string right away but it will just give eventually.. have a knife and just trim real quick trying not to get any on the car and put the other lights back in. if u do get some onthe car goo gone works like a charm. i did my own clears 5 bucks and 2 hours came out perfect. such a nice mod gl hope u like it.