Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   5th Generation Maxima (2000-2003) (https://maxima.org/forums/5th-generation-maxima-2000-2003-7/)
-   -   I'm creating a 5th gen. spring comparison gallery - Please post your side shot!! (https://maxima.org/forums/5th-generation-maxima-2000-2003/214694-im-creating-5th-gen-spring-comparison-gallery-please-post-your-side-shot.html)

housecor Mar 9, 2004 10:06 PM

Need pics for spring comparison gallery - Please READ THE RULES! :)
 
When I was shopping for springs, a big part of my decision was the cosmetic factor. I see so many threads asking "How far do these springs drop?" I think it would be great to direct people to a gallery for comparison! Can you guys help me out by posting pics of your drop?

The rules for pics I'll use in the gallery:
1. Must be a 5th gen.
2. Must be a dead on side shot of entire car - no angles
3. Must have stock rims (since it's difficult to compare drops on different wheel sizes)
4. By posting, you give me permission to use your pic - I will credit the owner's screen name.
5. Shot should be 500 pixels x 375 pixels (Cardomain standard size).
6. Lighting should be bright - to clearly display the wheel gap (or lack thereof!)
7. Car should be centered top to bottom and left to right in the shot and take up nearly the entire width of the pic.
8. Pic should be high quality - No cell phone shots please! :grinno:
9. Post your ride height front and rear (the measurement from the ground to the middle of your fender). This is important since some springs drop more than they claim. Please do NOT include these numbers on the pic itself (for consistency).
10. Be sure to mention which springs you're running!
11. Shot must be taken relatively level with the door handle (no shots from above or below to emphasize or mask the drop)
12. Front wheels should be pointed straight ahead

Example pic:
http://images.cardomain.com/member_i...6_179_full.jpg

I know this seems really picky, but the only way this gallery will be fair and of value is if all the shots are as similar as possible. **Don't be afraid to whip out your digicam because many of you may not have a pic that fits the requirements!** :thumbsup: I'll use the first shot I recieve for each spring offered for the 5th gen that fits the requirements above. Thanks in advance guys and bring on the shots! :bowdown:

KLOOGY Mar 9, 2004 10:14 PM

Maxspeeds w/ Tokico Blues..
http://images.cardomain.com/member_i...7_109_full.jpg

I have Teins and Koni yellows, ready to be installed in the next few weeks, so this will get lower...

housecor Mar 9, 2004 10:24 PM


Originally Posted by kloogy
Maxspeeds w/ Tokico Blues..
http://images.cardomain.com/member_i...7_109_full.jpg

I have Teins and Koni yellows, ready to be installed in the next few weeks, so this will get lower...

Kloog - Your car is SICK!! :bowdown: But crap, I should have mentioned another requirement: stock rims. Otherwise, it's hard to tell how low one spring is compared to another. Sorry I didn't clarify earlier man. I'll edit my orig. post.

2k1maxgle Mar 10, 2004 12:46 AM

Teins and KYB GR2s in my sig....on 18" wheels tho....

Cubanato Mar 10, 2004 04:08 AM

Eibach/Illuminas

picture in sig :)
if that too much of an angle i have a dead side shot on my homepage i think

-J

Bluesbrekr Mar 10, 2004 04:22 AM

Maxspeeds/stock struts. The gap seems larger in this pic because it was taken right at ground level.

http://images.cardomain.com/member_i.../357970_47.jpg

bighunt Mar 10, 2004 04:50 AM

Pics from my car. Teins w/KYB GR-2s

http://images.cardomain.com/member_i...833_3_full.jpg

http://images.cardomain.com/member_i...833_6_full.jpg

redstradic Mar 10, 2004 04:59 AM

it might help Housecor and future viewers of this thread if you guys can read and follow directions.

housecor Mar 10, 2004 05:30 AM


Originally Posted by redstradic
it might help Housecor and future viewers of this thread if you guys can read and follow directions.

LOL!! :grinno: C'mon guys, please post pics that fit what I've requested! :) If the pics aren't consistant and comparable, then they'll be of little value to those trying to make a spring decision.

Igor911 Mar 10, 2004 05:37 AM

Eibachs (1 front coil cut) and Tokico Blue's

http://www.igor911.com/images/suspension/lowered.jpg

NT2SHBBY Mar 10, 2004 05:41 AM

maxspeeds on gr2's on stock rims (when I had them):
http://images.cardomain.com/member_i...76_28_full.jpg

djPlayboy Mar 10, 2004 06:10 AM


Originally Posted by 2k1maxgle
Teins and KYB GR2s in my sig....on 18" wheels tho....


dood your car is an exact copy of mine :)
same rims, shocks, springs, and clear side markers....hehe

will post side pics this weekend

Quicksilver Mar 10, 2004 06:51 AM

http://gataxsales.com/rt%20sd%20full%20on.jpg


Tein S Tech Springs (rated 2.2" front/1.6" rear).
KYB-GR2 Struts.

Front measurement: 25 & 1/2"
Rear measurement: 26 & 3/8"

I did not trim the bump stops as per the Tein instructions, nor did I change my dustcover/bumbstops out for Teins. No problems to date (approx 19K miles).

housecor Mar 10, 2004 02:42 PM

Bump. Keep the pics coming, but don't forget to read the rules guys... :thumbsup:

asu174 Mar 10, 2004 02:47 PM


Originally Posted by housecor
but don't forget to read the rules guys... :

I've you're referring to Quicksilver's post, those are stock GLE wheels.

SeaFoam2DMax Mar 10, 2004 02:55 PM

http://images.cardomain.com/member_i...56_14_full.jpg

JICs you choose the drop, and how even you want - I went with a conservative zero gap, minimal tuck

Igor911 Mar 10, 2004 03:01 PM


Originally Posted by kcgc187
http://images.cardomain.com/member_i...56_14_full.jpg

JICs you choose the drop, and how even you want - I went with a conservative zero gap, minimal tuck

that looks absolutly sexy! :thumbsup:

housecor Mar 10, 2004 03:16 PM

!
 

Originally Posted by asu174
I've you're referring to Quicksilver's post, those are stock GLE wheels.

Nope! Quite the opposite in fact. Quicksilver is actually one of the few people who read and followed the rules! :grinno:

NYCe MaXiMa Mar 10, 2004 03:30 PM

very nice idea..

also.. it would be a nice idea to include multiple pics of the same spring setup if the cars have different diameter wheels or even tires..


here is mine on modified 4th gen KYB AGX struts/shocks and Ground Control coilovers (not really the best comparison because you can drop them lower, or raise them higher.. but this is about 3/4ths dropped..)

http://images.cardomain.com/member_i...85_66_full.jpg
http://images.cardomain.com/member_i...85_92_full.jpg
http://images.cardomain.com/member_i...85_90_full.jpg

feel free to use any of these...

LithiuMax Mar 10, 2004 03:54 PM

KYB-GR2 shocks/Tein S.Tech springs

http://images.cardomain.com/member_i...08_22_full.jpg

Also, you can use this for a side to side stock versus my car comparison.
http://images.cardomain.com/member_i...08_24_full.jpg

Ride height:

Front: 25-3/4"
Back: 26-1/8"

Measured from fender to ground.

Quicksilver Mar 10, 2004 06:50 PM

Bump for updates...

And yes, my post is updated...

irish44j Mar 10, 2004 07:01 PM

Notice not many are posting measurements....I am really interested in those...pics can be decieving, but measurements can't really lie...

housecor Mar 10, 2004 07:32 PM


Originally Posted by Quicksilver
Bump for updates...

And yes, my post is updated...

Alright! Thanks Quicksilver! Everyone look at post #13 as a reference. This is the only post that I can use so far. If you wonder why, re-read post #1. :)

BTW - That's one great looking GLE man. Love the drop.

Quicksilver Mar 11, 2004 06:20 AM


Originally Posted by housecor
Alright! Thanks Quicksilver! Everyone look at post #13 as a reference. This is the only post that I can use so far. If you wonder why, re-read post #1. :)

BTW - That's one great looking GLE man. Love the drop.


Thanks man. She's a looker, even as stock looking as that...

I might go with the '05 Altima wheels (5 spoke) before too long...but we'll see.

LithiuMax Mar 11, 2004 09:00 AM

Bump for updates (updated my post as well, with measurements).

Quicksilver Mar 11, 2004 12:58 PM


Originally Posted by LithiuMax
Bump for updates (updated my post as well, with measurements).


I'm willing to bet that the height difference between our cars is audio equipment related...

Looks good though. I like the stock wheels, but I like the '05 Altima wheels more...

Shogunsc4 Mar 11, 2004 01:58 PM

Tein H-tech (1.6 front drop/ 1.0 rear drop) with tokico blues.

http://images.cardomain.com/member_i...59_85_full.jpg

Quicksilver Mar 11, 2004 02:45 PM

Not to be a jackbag or anything, but make sure to post your actual middle-top fender to ground distance as well...

Jimmy Gardner Mar 11, 2004 04:40 PM

2K2whitemaxi- how did you get that low with the Eibach's?

Cubanato Mar 11, 2004 04:45 PM


Originally Posted by Jimmy Gardner
2K2whitemaxi- how did you get that low with the Eibach's?

eibach's drop lower thehn what they advertise :)
-J

Jimmy Gardner Mar 11, 2004 04:52 PM

Can you tell me how much they dropped? I am going to lower my wife's 03 and am considering using these springs, but their advertisement is only for 1.3" front and 1" rear, but your car looks like it got better than that. I have used Eibach springs before on other cars, and was super happy with them, I was just hoping someone got more than an inch out of them.

theMax Mar 11, 2004 04:56 PM

http://images.cardomain.com/member_i...82_30_full.jpg

Maxspeeds & stock wheels and struts--->

2K2DEMAX Mar 11, 2004 05:54 PM

http://images.cardomain.com/member_i...32_32_full.jpg

and for perspective

http://images.cardomain.com/member_i...32_36_full.jpg

BlackBIRDVQ Mar 11, 2004 07:40 PM

http://www.imagestation.com/picture/...1/fb473b6c.jpg
http://www.imagestation.com/picture/...3/f97f37b9.jpg
Ground Controll 7"ERS 500lbs front, 7" ERS 400lbs rear on Koni Yellows. On 17" Enkei RPO1s with winter tires on the front only...

Komax Mar 11, 2004 07:49 PM

I'm just amazed at how none except for #13 know what this thread is or follows the directions. Is it that Maxima owners are a little dense or just "rebellious"? :rolleyes:

BTW, Housecor, this is one of the most practical threads I've seen. Good call!

Quicksilver Mar 11, 2004 08:26 PM


Originally Posted by theMax
http://images.cardomain.com/member_i...82_30_full.jpg

Maxspeeds & stock wheels and struts--->


That is one sweet a$$ F4 Phantom in the background!!!!!!

housecor Mar 11, 2004 09:19 PM


Originally Posted by Komax
I'm just amazed at how none except for #13 know what this thread is or follows the directions. Is it that Maxima owners are a little dense or just "rebellious"? :rolleyes:

BTW, Housecor, this is one of the most practical threads I've seen. Good call!

:laugh: Thanks Komax. Trust me, I'm both disappointed and concerned! Clearly I could write anything in this post and no one is going to read it anyway. Either people didn't read my first post, or they realized they didn't have what I was asking for and decided to showcase their car in this thread anyway.

Quicksilver Mar 12, 2004 01:52 PM

Alright, everyone that has posted here please READ THE FIRST DAMN POST IN THE THREAD!! It clearly states what needs to be shown in order to make this a valid technical comparison. Follow my example for the love of all that is holy in Maxima land!!!

OK, I ranted a bit, but it's so damn simple, and I really don't want to think that only 2 of us can do this correctly... :deezo:

Triple8Sol Mar 12, 2004 02:19 PM

A friendly :rolleyes: for the geniuses in this thread....lol...

PoLo Mar 12, 2004 02:44 PM

Cattman Coilovers (Full System)
Front/Rear Measurments - 24" all around.

http://polo.lxanyc.com/Suspension/After/MVC-021S.JPG


All times are GMT -7. The time now is 02:38 AM.


© 2026 MH Sub I, LLC dba Internet Brands