clear HID's? Help please?
 

I wanna change the orange lens with clear lens, how can i take off the HID's? I tryed once with no luck... anybody?

you wanna clear them:

http://innerbean.com/housecor/clear_HIDs.html

Go here (found in the "How-To" section) :thumbsup: www.innerbean.com/housecor/clear_HIDs.html :cool:

man, OVEN the headlights????? LOLLLL (Hey dad, lets eat maxima headlights today) LOL LOLLLL

the clear lens is bigger than orange?

anybody else with instructions?

the clear is slighly smaller you have to glue it on since is not ment for that install.

sorry but, glue it where?

thats funny because I just popped my headlights in oven today to clean them as per the link above from housecor.....it was pretty easy, I put in oven for 35 min @ 250deg, took them out and they came right off (after prying sealant away with small screwdriver......it sounds crazy putting them in oven but works quite fine......good luck

in the same place the oem go. check the pic.

http://innerbean.com/housecor/images...l/122_2207.jpg

did you glue the clear lens?

don't have to glue them if you don't want. just leave them clear with no cover if you prefer. just get a orange bulb for a susbtitute.

Im gonna glue it, i cant do anything else.... btw you got nice fogs, what kind are they?

what page are you looking at cause I got friend pics on my sight with HID fogs. I haven't done that yet.

yes you right, its not your car.... page 3

yea the white one "eastsidemax" got hit in a accident and he put a claim that the headlights didn't work and the insurance paid for a new set of the oem HID and he used them for the fog mod.

tha gray one "Trex" he use the umnitza HID kit

do you know any link?

http://www.umnitza.com/index.php?osC...068247ca2af277

also check EBAY for "phliips HID kit"

http://search.ebay.com/phillips-hid_...jsZ1QQfromZR40

thanks man!!! :)

what so funny...
i did that with mine...if your serious about taking the orange piece out tahts waht you have to do
your not gonna burn them if you set the temp low
it just heats up the glue so its easy to sepreate them

its funny for me....

i dont understand, i have to glue the headlights or the clear lens?

what???

take the headlights outa your car...
and put them into the oven...its heats up the glue so you can seperate them into 2 pieces...
then the piece is easy to get out...its really easy to do...
and if you want to paint the inside black like i did...nows the time to do it

oh ok, thanks!

My mom sh!t when she saw my headlights cooking in the oven. lol
Great results tho.
http://memimage.cardomain.net/member...52_15_full.jpg

Drive over to Chicago & we'll do it for you. :grinno:

LOLLLL!! probably im not gonna do it re, lets say if anything happen with the cops, i will have to oven my headlight again to put the orange lens back.....

Cops?!? For that?! Are you joking? The cops by me suck, but they'd NEVER say anything about the lenses being clear up front. I've got chrome bulbs that flash amber. Now if you're planning on blue/white turn signal bulbs, that's a diff story.

Re malaka, when i went to motor vehicle for my exhaust, they said when you coming back make sure your side markers will be orange on the front and red on the back.... i have clear side markers

So then you just nod your head, say you'll do it, and tell them to get fuked under your breath.

You gotta clear out the amber. It looks sooo good.
Anywho... i'm going to bed. I'll try to convince you to do it another day.

are you gonna do it for me??

Hell yeah, i have to wake up tomorrow (today) early for Soccer games...

kalinixta re!!!!

PANATHA POWER!!!!!!! ;)

Can someone post side by side pics (or a link to them) of the plastic clear lens from Home Depot and the one from Tap plastics?
Thanks a million!

This is up close of my Home Depot plastic clear lens.
http://memimage.cardomain.net/member...52_14_full.jpg

Thanks, I'm gonna go with the one you have

I'm not a fan of the Tap Plastics lens (although no cutting is needed)

Here's my Home Depot clears........

http://memimage.cardomain.net/member...70_73_full.jpg

How much cutting is required for the home depot lenses and where did you buy your eye lids from.

looks like leftcoasttuning eyelids, which they dont sell anymore as far as i know :(

Yup, eyelids from Leftcoast and sadly, they don't make them anymore.

You need to cut the Home Depot lens to a smaller circle so they fit. Not that tough to do. Use a Dremel and cut it a bit larger so you can trim it down for a tight fit.

Hey, I could do both angel eyes and this at the same time correct?

yes you can do both

Sure could. In fact, it's the perfect time. I'm going to replace a clearance light at the same time i clear my HID's. I'm also going to replace my fog light bulbs.

I got really good at doing it. Actually opened up the headlights on my Maxima 5 or 6 times.

Can we get some dolmades and souvlaki with that???

Maybe top it off with some loukoumades!!!!!