![]() |
springs and 20's?
This isn't for me so don't flame. It's just a post because what my friend is doing I'm not sure will work. He's got 20's on his '00 se which i dont like anyways but to each his own. Today i swung by my local aftermarket spot to find him dropping it on Eibach springs which i believe give it about 2 in the front and an inch and a half rear of drop. I told him it wasnt gonna work and its gonna rub. I just wanna see if anyone has a similar set up or if I'm right because he's really funny when things don't go the way he pays for them to go. And he has stock struts so its just the drop. Thanx, Lex.
|
the rubbing will all depend on the tire size and wheel offset. if he's dropping it on stock struts, he'll be limping his way to the shop pretty quick anyways. so be a good friend and tell him to buy some illuminas.
|
The eibach's only drop it 1.3 in front and 1.0 in rear. I've got 20's and I'm about to go with Tein H-techs which give a 1.6 front and 1.0 rear. I talked to a guy who has 20's and is running progress springs which is 1.7 front and 1.5 rear and he doesn't rub.
|
damn redskin, your car seriously need a drop....
i cant stand the 4x4 look. |
Originally Posted by humble_max
damn redskin, your car seriously need a drop....
i cant stand the 4x4 look. |
yeah i hear ya, thats why i usually get the drop first then the rims to avoid that dreaded 4x4 look.
your car is sitting so high off the ground esp with those 20's not big fan of 20" blings though.. (i had to say it) but everyone has different tastes.. |
I know a lot of orgers aren't but that's good for me cuz that means my max is more original. I didn't want to drop first, cuz I wasn't sure how low I could go. Unfortunately, there's another max that looks like mine with 20's. Here's the link - http://www.cardomain.com/member_page...page_id=342336 Once I saw his ride I knew I had to get 20's. I really think 18's are too small for 5th gens, but it kind of depends on the style too. I had 18's on my 4th gen and they looked pretty big, but the rim had a lot of surface area.
|
check my homepage..
|
Originally Posted by TitaniuMax03
check my homepage..
|
Originally Posted by DaBoxSE
Oh no...I think I want 20s now! You know...sometimes, I look back at my 19's and think they look too small. :jeffy:
+1 especially if you have a lip on the wheels. |
Im SLAMMED with JIC's on 20's. Im tucking a half an inch all the way around plus i dont have much rubbing at all. I hope this helps.
http://memimage.cardomain.net/member...7_207_full.jpg http://memimage.cardomain.net/member...7_208_full.jpg http://memimage.cardomain.net/member...7_180_full.jpg |
^^^NICE 20's look dope but i think rubbing would freak me out...
|
how often do you have to buy tires? Do you drive the car often?
|
I have JIC's so the alignment is PERFECT! Tires wear fine. I have toyo 245/35 fz4's...the ride is great. In my opinions, to really have the best possible look and ride i wouldnt lower on 20's if you dont have JIC's. Theres a reason why JIC's cost over $1000. Theyre the best! The tire hits the top of the front fenders when i go over these HUGE bumps (Im talking like HUGE ditches etc). This doesnt happen to often anyway. That wouldnt happen if i wasnt tucked though...I drive the car enough but its mostly a show car.
|
rob, i think you have the cleanest 20s ive seen on a max. i seriously hate those ugly bulky chrome 20's. just doesnt flow with the clean lines of a maxima. i still think 20s a little too big for maixmas but yours actually is lookin kinda tite!!
|
Originally Posted by humble_max
rob, i think you have the cleanest 20s ive seen on a max. i seriously hate those ugly bulky chrome 20's. just doesnt flow with the clean lines of a maxima. i still think 20s a little too big for maixmas but yours actually is lookin kinda tite!!
|
Rob van dam have you had any issues with your wheels as far as bent/damaged . It does look nice but IMO you need a little more cushining cause on my last car i had 35 series tires and bent two rims. but i suppose it comes down to the wheel quality and road quality. Also if you dont drive it that much.
|
|
thanks for the compliments. I havent had any problem at all with the wheels. I got them back in january and the 245/35 toys ride great! I mean its so smooth suprisningly....I wanted to get bigger then my 18's and i said why not go 20's. The chrome look ians tmy thing, so i found these new wheels from 5 zigen that just came out and decided on them. got a lil company support from them as well..
|
I like those 20s a lot!! Not often do you see 20s that arent chring!!! (thats Chrome Bling)
|
Axis Milano's are now offered in 20 inch. I'd be curious to see those on a max in that size with coilovers.
RVD - have you rolled your fenders? |
I have no rubbing with my 20s and I didn't have to roll my fenders
http://memimage.cardomain.net/member...71_18_full.jpg |
I was wondering based on the 245's he is running. What size tires do you run?
You also dont appear to be tucking much its pretty flush. His setup looks like he is tuckin more tire. |
actually upon further review it looks about the same.
|
i wanna get some new shoes i would like to go big like 20's and can afford it but i am wondering if it would be worth it for a daily driver...
sucks for some reason my max has 4th gen 16's on it...way to buy used! |
Originally Posted by TenetMusic
i wanna get some new shoes i would like to go big like 20's and can afford it but i am wondering if it would be worth it for a daily driver...
sucks for some reason my max has 4th gen 16's on it...way to buy used! |
Originally Posted by nv max
I have no rubbing with my 20s and I didn't have to roll my fenders
http://memimage.cardomain.net/member...71_18_full.jpg man i keep seeing your car with 2 different types of rims...whats up with that? Do you have two sets??..lol |
front
http://memimage.cardomain.net/member...7_183_full.jpg rear http://memimage.cardomain.net/member...7_184_full.jpg http://memimage.cardomain.net/member...7_175_full.jpg [img] http://memimage.cardomain.net/member...7_190_full.jpg I rolled the front some. I had 5 zigen shave down the wheel from a 38 offset to a 42 offset. That allowed me to be able to tuck the rear without having to roll. |
i dont think i can afford 20's but those woulndt last a day here in jersey. too many damn potholes, i seriously hate it. some road are so bad it almost feels like your off roading. i mean there is this one road i drive thru, and theres a train track which is full of bumps, huge dips that you have to slow down or your car will take a beating, then theres one part, where its all bumps, you cant even go around it. i know its off topic, but getting 20" on cars over here would be pointless. did i mention that i hate jersey roads? im seriously thinknin about moving... |
that is one beautiful max!!!
|
amen about NJ roads -and Rob those wheels look sick
|
thanks for the compliments....ATL roads arent to to bad. I go to school at ga tech and i manage to get around very well. Im pretty much out of ideas with the car so id say its done.
|
Originally Posted by rob van dam
thanks for the compliments....ATL roads arent to to bad. I go to school at ga tech and i manage to get around very well. Im pretty much out of ideas with the car so id say its done.
|
Iv'e spent enough on the car already!...This yr will be my last yr showing ("maybe"). I am required by 5 Zigen to be in 4 more shows this yr.
|
| All times are GMT -7. The time now is 04:26 AM. |
© 2026 MH Sub I, LLC dba Internet Brands