How-to for Blow By Catch Can
#121
Might want to take out the filter Professor. And if you're going to spend $11+ on that specific filter, then spend a little extra and get the bigger filter at Home Depot which is filter less, higher capacity, metal top. Works A LOT better than what you have in those pictures. Trust me.
#122
Originally Posted by JiggaD369
Might want to take out the filter Professor. And if you're going to spend $11+ on that specific filter, then spend a little extra and get the bigger filter at Home Depot which is filter less, higher capacity, metal top. Works A LOT better than what you have in those pictures.
But re: irish44j's posts about its small capacity.
#123
Well the top piece is metal, they offer a metal bowl for it to, But this is only temporary, I have a Real oil catch can on order, its alumminum and has a larger capacity, i paied $35 for it, heres a pic of what i ordered.
And NO, Iam not using that hose!
And NO, Iam not using that hose!
#125
Ok guys I went to do this mod today, and after all hooked up i have a vacuum leak coming from the bottom of the filter. The black cap at bottom leaks right out and so does the twist on bottom.....what do you guys do about that?
#126
Originally Posted by Gle03Max
Ok guys I went to do this mod today, and after all hooked up i have a vacuum leak coming from the bottom of the filter. The black cap at bottom leaks right out and so does the twist on bottom.....what do you guys do about that?
#128
Originally Posted by Gle03Max
The husky one you have I believe it was like 11.88 at home depot.
#129
Let it be known that Husky has two different style small filters. One is capped at bottom and the other has some sort of release valve at bottom. The one that is capped is the right one as the other one is a constant vacuum leak as I just experienced.
Heres a pic to show the difference.
On a side note how do you get the picture to just show on forums not as a link?
Heres a pic to show the difference.
On a side note how do you get the picture to just show on forums not as a link?
#130
Let it be known that a company called Grimspeed makes a oil/air seperator that never needs to be serviced. just install it & forget about it. Cost alittle bit of money, but its a nice looking piece.
http://www.grimmspeed.com/catalog/pr...roducts_id=191
http://www.grimmspeed.com/catalog/pr...roducts_id=191
#131
Let it be known that a company called Grimspeed makes a oil/air seperator that never needs to be serviced. just install it & forget about it. Cost alittle bit of money, but its a nice looking piece.
http://www.grimmspeed.com/catalog/pr...roducts_id=191
http://www.grimmspeed.com/catalog/pr...roducts_id=191
#133
Sorry for bumping a 9 year old thread, lol, but I'd like to ask if someone can kindly share a photo of their oil catch can setup for their 5.5gen? All the pics in previous pages are gone.
Looking for some mounting ideas. Thx in advance!
Looking for some mounting ideas. Thx in advance!
#135
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
12-20-2021 06:57 PM