5th Gen "I AM NEW HERE BUT HAVE A QUESTION" thread
#641
Originally Posted by 707SE
Great info. I used Meguairs on my wifes car and it didn't do the trick. It seems like a wet sand prior to the Meguairs application is in order.
One question - Did you remove the headlights first? I'd imagine it's easier for the sanding portion but might be a pain to remove...
One question - Did you remove the headlights first? I'd imagine it's easier for the sanding portion but might be a pain to remove...
The removal process will take you no less then 2 mintures for both headlights and install is the same time. Nissan did a very good good on ease of removal with this perticular part. It is literalily two bolts on the top then you pull straight on the housing. It will seem like you are going to break the light put you have to pull pretty hard because there is a retaining clip (not sure if it is correct terminology) holding it in besuides the two 10mm bolts on top. A word of caution though you want to pull the headlights straight out and NOT from the top where the bolts are.
On the laminx question. As I stated there are many products out there to do the trick. That one might work amazing I personally have never used it. I would start in a small area in the corner and test it. YOu just want to make sure the sealant is clear after you spent all that time to clear the headlights.
#642
Does anyone know the answer to the shifter/ashtray bezel removal question I had? For referrerence this is a picture of the piece I am inquiring about. Remember it is the bezel not the sihft plate or shift assembly just the trim piece.
#643
Originally Posted by chris in va
I went to the dealer today so they could look up the FCC ID number from my VIN. The parts guy told me he can't do that since I could just take that information and buy a remote somewhere else.
Now what? I still don't know the ID # for my particular car.
Now what? I still don't know the ID # for my particular car.
1. Talk to your sales guy to see if he can get it for you.
or
2. Call Nissan North America to see if they can help you out.
***BONUS SUGGESTION****
Call the parts department again when that a-hole isn't there. Surely there aren't two ****** in the same parts department...
#644
the org...not what it was
iTrader: (8)
Join Date: May 2004
Location: Communist Wealth of Virginia
Posts: 8,143
Originally Posted by ctrent86
Does anyone know the answer to the shifter/ashtray bezel removal question I had? For referrerence this is a picture of the piece I am inquiring about. Remember it is the bezel not the sihft plate or shift assembly just the trim piece.
#645
Guest
Posts: n/a
Originally Posted by ctrent86
Does anyone know the answer to the shifter/ashtray bezel removal question I had? For referrerence this is a picture of the piece I am inquiring about. Remember it is the bezel not the sihft plate or shift assembly just the trim piece.
This is EASY! Apply e-brake and shift car into N or lower. Take a philips screw driver and remove the one screw in the ashtray. Next get a flathead screw driver and wedge it inbetween bezel and car. It will pop out. Put a cloth around the tip of the screwdriver to rpevent scratching. Don't be scared, Pop that damn thing up and pull it out. Unclip electrical plugs when removed.
#646
I am new to forum and have tried to find answer to my question. My 1993 Max SE daily driver just blew up, and my girl wants a 5th Gen Maxima to replace it. I know the 3.0 is a good motor, but have limited info on the 3.5. I have found some areas where ther is oil burning issues and a few others, but should that be a deterrent? How much difference in powere and torque is there? We have found some good deals on 01's and 02's and 03's
#648
Guest
Posts: n/a
Originally Posted by bigbirney420
I am new to forum and have tried to find answer to my question. My 1993 Max SE daily driver just blew up, and my girl wants a 5th Gen Maxima to replace it. I know the 3.0 is a good motor, but have limited info on the 3.5. I have found some areas where ther is oil burning issues and a few others, but should that be a deterrent? How much difference in powere and torque is there? We have found some good deals on 01's and 02's and 03's
#649
BigBirney-
I just got an 01 and really love it, that being said, I wish I would have held out and gotten an 02 or 03, most of the mods I want to do are done on the 5.5 gen. Oh well, i am thoroughly happy with my Maxima so far.
I just got an 01 and really love it, that being said, I wish I would have held out and gotten an 02 or 03, most of the mods I want to do are done on the 5.5 gen. Oh well, i am thoroughly happy with my Maxima so far.
#651
Originally Posted by bigbirney420
I am new to forum and have tried to find answer to my question. My 1993 Max SE daily driver just blew up, and my girl wants a 5th Gen Maxima to replace it. I know the 3.0 is a good motor, but have limited info on the 3.5. I have found some areas where ther is oil burning issues and a few others, but should that be a deterrent? How much difference in powere and torque is there? We have found some good deals on 01's and 02's and 03's
Find out what your girl likes about the 5th gen Max. If it's luxury, power, and a superior overall appeal that no other car in it's class can match, then yeah - get a 5th gen.
#652
Originally Posted by 707SE
Like Vaporhead said there are problems with all cars. If you want a daily driver that you can buy and never think about again then I'd go get a new Hyundai. Those things come with 10years/100k warranty.
Find out what your girl likes about the 5th gen Max. If it's luxury, power, and a superior overall appeal that no other car in it's class can match, then yeah - get a 5th gen.
Find out what your girl likes about the 5th gen Max. If it's luxury, power, and a superior overall appeal that no other car in it's class can match, then yeah - get a 5th gen.
#653
Originally Posted by aamir
Hey guys,
I was wondering, are there any 6 speed shift **** options besides the stock one that are functional with the reverse lockout? If there aren't, does anybody know of a place where I could get a stock one cheaply? My shift **** is scratched up because of the previous owner. Thanks
I was wondering, are there any 6 speed shift **** options besides the stock one that are functional with the reverse lockout? If there aren't, does anybody know of a place where I could get a stock one cheaply? My shift **** is scratched up because of the previous owner. Thanks
#654
Originally Posted by bigbirney420
Its not about not having to worry about it. I had just read about those specific issues with the 3.5. I have a mid to low 13 second daily driver with many mods, but for her its different. Her brother has a 2000 Max and she likes it a lot. The 3.5 idea would be more for me, I would do some light mods, but not too much.
#655
Originally Posted by rdotharder22
BigBirney-
I just got an 01 and really love it, that being said, I wish I would have held out and gotten an 02 or 03, most of the mods I want to do are done on the 5.5 gen. Oh well, i am thoroughly happy with my Maxima so far.
I just got an 01 and really love it, that being said, I wish I would have held out and gotten an 02 or 03, most of the mods I want to do are done on the 5.5 gen. Oh well, i am thoroughly happy with my Maxima so far.
#656
What a lil beyotch that parts guy is. Two suggestions:
1. Talk to your sales guy to see if he can get it for you.
or
2. Call Nissan North America to see if they can help you out.
***BONUS SUGGESTION****
Call the parts department again when that a-hole isn't there. Surely there aren't two ****** in the same parts department...
1. Talk to your sales guy to see if he can get it for you.
or
2. Call Nissan North America to see if they can help you out.
***BONUS SUGGESTION****
Call the parts department again when that a-hole isn't there. Surely there aren't two ****** in the same parts department...
BTW, got the Murano washer nozzles on order. Wohoo!
#657
Originally Posted by VaporHead
This is EASY! Apply e-brake and shift car into N or lower. Take a philips screw driver and remove the one screw in the ashtray. Next get a flathead screw driver and wedge it inbetween bezel and car. It will pop out. Put a cloth around the tip of the screwdriver to rpevent scratching. Don't be scared, Pop that damn thing up and pull it out. Unclip electrical plugs when removed.
#658
I have a question. I'm a NewB and I don't know much about cars but I do know Maximas are fun 2 drive this is my second (5th gen) one blk on blk '01 w/ 128,000 on it, anyways I'm having a starting issue. When I start the car it starts (vroooooom) and then goes off. Only way for it to stay on is to hit the gas pedal and it will idle ruffly like its about to go off but it comes back to life. This problem only happens when it has been sitting for a few hours. After I drive it and turn it off and start it back up it starts just fine. I replaced the fuel pump and screen, a friend of mines cleaned the throttle body and I got the spark plugs replaced, ngk Iridiums. The problem still exist and it is very annoying. Somebody, anybody please help. Oh yeah and the check engine light is not on and I have not gotten the codes read cause auto zone says the engine light has to be on. Please help me if you can.
#660
Guest
Posts: n/a
ATTENTION: Moderators will ban you if you use Why do they even have this smiley if you get banned for using it?
They can ban this account/IP, it don't matter, I have unlimited IP spoofing through proxy servers. They will permanently ban your account if you create a additional account to ask a mod why you were banned in the first place. The majority of the moderators are probably teenie boppers on a power trip. So, for you mods who ban people to get your rocks off, and you are also
This thread will prolly be deleted, but I will be back to post again.
They can ban this account/IP, it don't matter, I have unlimited IP spoofing through proxy servers. They will permanently ban your account if you create a additional account to ask a mod why you were banned in the first place. The majority of the moderators are probably teenie boppers on a power trip. So, for you mods who ban people to get your rocks off, and you are also
This thread will prolly be deleted, but I will be back to post again.
#661
Originally Posted by IPSpoofer
ATTENTION: Moderators will ban you if you use Why do they even have this smiley if you get banned for using it?
They can ban this account/IP, it don't matter, I have unlimited IP spoofing through proxy servers. They will permanently ban your account if you create a additional account to ask a mod why you were banned in the first place. The majority of the moderators are probably teenie boppers on a power trip. So, for you mods who ban people to get your rocks off, and you are also
This thread will prolly be deleted, but I will be back to post again.
They can ban this account/IP, it don't matter, I have unlimited IP spoofing through proxy servers. They will permanently ban your account if you create a additional account to ask a mod why you were banned in the first place. The majority of the moderators are probably teenie boppers on a power trip. So, for you mods who ban people to get your rocks off, and you are also
This thread will prolly be deleted, but I will be back to post again.
#662
Subwoofer for Bose '01 SE
I am getting a little tired of the rattling that comes from the rear deck of my Max from the Bose sub. While I tried stuffing the gaps with card board to dampen the rattling it's just doesn't cut it.
So I figured maybe I would just disconnect it and install a sub of my own. Anyone know of any subwoofer kits that can run off of the Bose line that is there? I would much rather not have to pull everything apart, run lines fro mthe front, etc... in other words, as simple as it can possibly get.
Thanks.
So I figured maybe I would just disconnect it and install a sub of my own. Anyone know of any subwoofer kits that can run off of the Bose line that is there? I would much rather not have to pull everything apart, run lines fro mthe front, etc... in other words, as simple as it can possibly get.
Thanks.
#663
Hey guys,
here is a strange question. I have full collision coverege on my 02SE. Is it neccessary to tell my insur. co. about mods (intake, cattback, leather seats, grill)?
They did ask about aftermarket parts.
Installed Weapon R secret intake 2 days ago. So far so good. Love the sound. Did not have a chance to take it to highway and did not notice any changes in performance.
Cattback is next. Can't make up my mind about wheels: 19' or 20'? Need input on this one...
thanks.
here is a strange question. I have full collision coverege on my 02SE. Is it neccessary to tell my insur. co. about mods (intake, cattback, leather seats, grill)?
They did ask about aftermarket parts.
Installed Weapon R secret intake 2 days ago. So far so good. Love the sound. Did not have a chance to take it to highway and did not notice any changes in performance.
Cattback is next. Can't make up my mind about wheels: 19' or 20'? Need input on this one...
thanks.
#664
Originally Posted by Ricfutures
I am getting a little tired of the rattling that comes from the rear deck of my Max from the Bose sub. While I tried stuffing the gaps with card board to dampen the rattling it's just doesn't cut it.
So I figured maybe I would just disconnect it and install a sub of my own. Anyone know of any subwoofer kits that can run off of the Bose line that is there? I would much rather not have to pull everything apart, run lines fro mthe front, etc... in other words, as simple as it can possibly get.
Thanks.
So I figured maybe I would just disconnect it and install a sub of my own. Anyone know of any subwoofer kits that can run off of the Bose line that is there? I would much rather not have to pull everything apart, run lines fro mthe front, etc... in other words, as simple as it can possibly get.
Thanks.
The rattle is not the Bose sub, though, it's the rear deck. There is a fix for it:
read: http://www.innerbean.com/housecor/bose_deck_fix.html
#665
Originally Posted by maxig0
Hey guys,
here is a strange question. I have full collision coverege on my 02SE. Is it neccessary to tell my insur. co. about mods (intake, cattback, leather seats, grill)?
They did ask about aftermarket parts.
Installed Weapon R secret intake 2 days ago. So far so good. Love the sound. Did not have a chance to take it to highway and did not notice any changes in performance.
Cattback is next. Can't make up my mind about wheels: 19' or 20'? Need input on this one...
thanks.
here is a strange question. I have full collision coverege on my 02SE. Is it neccessary to tell my insur. co. about mods (intake, cattback, leather seats, grill)?
They did ask about aftermarket parts.
Installed Weapon R secret intake 2 days ago. So far so good. Love the sound. Did not have a chance to take it to highway and did not notice any changes in performance.
Cattback is next. Can't make up my mind about wheels: 19' or 20'? Need input on this one...
thanks.
As to wheels.....18s. Definitely not 20s. They look stupid.
#666
Originally Posted by irish44j
if you want the parts covered by your insurance, some companies require that you list them. Mine doesn't require me to, but they still cover my aftermarket stuff (including HIDs).
As to wheels.....18s. Definitely not 20s. They look stupid.
As to wheels.....18s. Definitely not 20s. They look stupid.
#667
Originally Posted by maxig0
what about 19'?
#669
Originally Posted by irish44j
its all about personal opinion man...I personally wouldn't put any rims bigger than 18s on my car. I think 18s look plenty big (see the left pic on my sig) and don't want to slow the car down even more with 19s......other people have different opionions. You have to do what YOU like and not worry about what other people like.
#670
2003 maxima - accelerator position sensor
My car has approximately 55,000 miles on it, and last week after
stopping at a stop sign, my check engine light came on and my car would
no longer accelerate over 2500 RPM's. Long story short, I towed the car
to my local Nissan dealer and they told me there were many faults, but
the main code seemed to indicate a faulty Accelerator Position Sensor.
The dealer then went on to tell me that this part is not available
anywhere in the US and shows up as backordered from the manufacturer in
Japan and will take a minimum of 8-12 weeks to get. They said my only
other option was to put in a used part, from which they could locate 1
from a car with 80K miles, and the price was about the same $220 versus
$240 new.
So my dilema is put a part with 80K miles use in for nearly the same
price without warranty or be without a car for several months while Nissan thinks about manufacturing the part. To me this seems to be totally unacceptable, it doesn't seem right that it would take so long to get a part for a 2003 car. Yet I called Nissan consumer affairs and they told be that the
part is not in stock and is on a manufacture backorder, meaning it has
not even been manufactured yet. Has anyone had similar problems with
Nissan and what did you do? This seems totally rediculus that it would
take months to get a faulty electrical sensor on a 2003 vehicle. Can
car manufacturers get away with not having parts available for newer
model cars?
stopping at a stop sign, my check engine light came on and my car would
no longer accelerate over 2500 RPM's. Long story short, I towed the car
to my local Nissan dealer and they told me there were many faults, but
the main code seemed to indicate a faulty Accelerator Position Sensor.
The dealer then went on to tell me that this part is not available
anywhere in the US and shows up as backordered from the manufacturer in
Japan and will take a minimum of 8-12 weeks to get. They said my only
other option was to put in a used part, from which they could locate 1
from a car with 80K miles, and the price was about the same $220 versus
$240 new.
So my dilema is put a part with 80K miles use in for nearly the same
price without warranty or be without a car for several months while Nissan thinks about manufacturing the part. To me this seems to be totally unacceptable, it doesn't seem right that it would take so long to get a part for a 2003 car. Yet I called Nissan consumer affairs and they told be that the
part is not in stock and is on a manufacture backorder, meaning it has
not even been manufactured yet. Has anyone had similar problems with
Nissan and what did you do? This seems totally rediculus that it would
take months to get a faulty electrical sensor on a 2003 vehicle. Can
car manufacturers get away with not having parts available for newer
model cars?
#671
Here's what I would do, others may have better answers.
1) I would find out as much as possible about this part on this forum and other sites so that you know it's function and history. Maybe it's available somewhere out there.
2) If possible get the car checked out by another reliable mechanic... your dealer might be on crack.
3) Check with junk yards, find out if they have any 03 Maximas. Might get it for cheap.
4) Get in touch with THE manager at your dealer and get him to explain again before you call Nissan and ask for the highest ranking manager you can get on the phone. The answer they gave you simply isn't acceptable by any means.
Good luck.
1) I would find out as much as possible about this part on this forum and other sites so that you know it's function and history. Maybe it's available somewhere out there.
2) If possible get the car checked out by another reliable mechanic... your dealer might be on crack.
3) Check with junk yards, find out if they have any 03 Maximas. Might get it for cheap.
4) Get in touch with THE manager at your dealer and get him to explain again before you call Nissan and ask for the highest ranking manager you can get on the phone. The answer they gave you simply isn't acceptable by any means.
Good luck.
#672
Cold cranking problems just like VTC on 3rd gen
My car is behaving just like it's having the VTC problems found on 3rd gen maximas.
http://forums.maxima.org/showthread.php?t=491753
http://forums.maxima.org/showthread.php?t=407923
On cold starts I get clacking and this morning it was down right scary (30 degrees). Sounded like my valve train was coming apart, then as it warmed up it went from heavy to light pinging and then cleared up altogether.
Other symptoms:
Before it got this bad it used to howl a little on cold starts until warmed up. Last year my starter died and was replaced. This year the new starter is beginning to grind on cold mornings like this morning. Could this be high compression left over from advanced timing when the engine was warm? Also I had some moderate pinging this summer when engine got warm so I replaced MAF sensor which seemed to help, but perhaps the cooler weather fooled me to think it got better
Any ideas are appreciated. Thanks
2000 Maxima w/110Kmiles
http://forums.maxima.org/showthread.php?t=491753
http://forums.maxima.org/showthread.php?t=407923
On cold starts I get clacking and this morning it was down right scary (30 degrees). Sounded like my valve train was coming apart, then as it warmed up it went from heavy to light pinging and then cleared up altogether.
Other symptoms:
Before it got this bad it used to howl a little on cold starts until warmed up. Last year my starter died and was replaced. This year the new starter is beginning to grind on cold mornings like this morning. Could this be high compression left over from advanced timing when the engine was warm? Also I had some moderate pinging this summer when engine got warm so I replaced MAF sensor which seemed to help, but perhaps the cooler weather fooled me to think it got better
Any ideas are appreciated. Thanks
2000 Maxima w/110Kmiles
#673
Originally Posted by master44
and last week after stopping at a stop sign, my check engine light came on and my car would no longer accelerate over 2500 RPM's
#674
Yellow "lexus" capsules
Guys,
This one is about yellow capsules for fogs i got from hidtech: for 02-03 owners- don't take a chance getting them (i did). You better of with yellow replacement bulbs. Capsules do not fit properly into 2K2 fogs- period. They r too long for housing + taking a glass lense from housing is a major headache, baking them in the oven does not help a bit ( 00-01 housing is a lot easier to deal with and abviously a far better fit)
Just read hidtech's post- he "does not do glass!!"... wonder, why...
You might still take a chance installing but you will find that lense is sitting right on top of the capsule, touching it, which makes very difficult to put everything back together again. I actually end up cracking one of capsules and now have one fog ready to go (somewhat...) and hope that hidtech will sell me one capsule, not two.
...still overall- fit is horrible and you gonna need a lot of silicon to keep whole fog light together.
This one is about yellow capsules for fogs i got from hidtech: for 02-03 owners- don't take a chance getting them (i did). You better of with yellow replacement bulbs. Capsules do not fit properly into 2K2 fogs- period. They r too long for housing + taking a glass lense from housing is a major headache, baking them in the oven does not help a bit ( 00-01 housing is a lot easier to deal with and abviously a far better fit)
Just read hidtech's post- he "does not do glass!!"... wonder, why...
You might still take a chance installing but you will find that lense is sitting right on top of the capsule, touching it, which makes very difficult to put everything back together again. I actually end up cracking one of capsules and now have one fog ready to go (somewhat...) and hope that hidtech will sell me one capsule, not two.
...still overall- fit is horrible and you gonna need a lot of silicon to keep whole fog light together.
#675
Originally Posted by maxig0
Guys,
This one is about yellow capsules for fogs i got from hidtech: for 02-03 owners- don't take a chance getting them (i did). You better of with yellow replacement bulbs. Capsules do not fit properly into 2K2 fogs- period. They r too long for housing + taking a glass lense from housing is a major headache, baking them in the oven does not help a bit ( 00-01 housing is a lot easier to deal with and abviously a far better fit)
Just read hidtech's post- he "does not do glass!!"... wonder, why...
You might still take a chance installing but you will find that lense is sitting right on top of the capsule, touching it, which makes very difficult to put everything back together again. I actually end up cracking one of capsules and now have one fog ready to go (somewhat...) and hope that hidtech will sell me one capsule, not two.
...still overall- fit is horrible and you gonna need a lot of silicon to keep whole fog light together.
This one is about yellow capsules for fogs i got from hidtech: for 02-03 owners- don't take a chance getting them (i did). You better of with yellow replacement bulbs. Capsules do not fit properly into 2K2 fogs- period. They r too long for housing + taking a glass lense from housing is a major headache, baking them in the oven does not help a bit ( 00-01 housing is a lot easier to deal with and abviously a far better fit)
Just read hidtech's post- he "does not do glass!!"... wonder, why...
You might still take a chance installing but you will find that lense is sitting right on top of the capsule, touching it, which makes very difficult to put everything back together again. I actually end up cracking one of capsules and now have one fog ready to go (somewhat...) and hope that hidtech will sell me one capsule, not two.
...still overall- fit is horrible and you gonna need a lot of silicon to keep whole fog light together.
I'm not sure why you had such a problem though....several 02-03 guys have done it with no problems
#676
Performance Filter Info
Im a NOOB I know.... but I couldnt help but post this for those who havent done thier homework on performance filters. I havent really needed to ask any questions since all the answers are already on here, you just have to dig a little..THANKS MAXIMA.ORG
http://www.mkiv.com/techarticles/filters_test/2/
http://www.mkiv.com/techarticles/filters_test/2/
#677
Originally Posted by irish44j
somebody didn't do their research
I'm not sure why you had such a problem though....several 02-03 guys have done it with no problems
I'm not sure why you had such a problem though....several 02-03 guys have done it with no problems
It is 7th day of new intake, so far doing well.
#678
06 350Z wheels
Im looking at trading my 18" aftermaket wheels for a set of 06 350z 18" 5 spoke wheels, but will they fit? I ask because the 06 5 spoke wheel is a widder wheel in the back, let me know and if you have a picture of one please post it.
#679
My 03' Maxima SE is making a funky rotten egg like smell, after hard acceleration. I have smelled when other Japanese cars have passed me on a 2lane. Our Maxima eats about a quart of oil per oil change, no leaks though. Any possibilites would be great, thanks.
#680
Also it is time for me to flush the tranny, I called Nissan to find out wich fluid is best, they told me to buy Nissans. I have always used Mobil 1 oil in it so I found Mobil 1 ATF, but it dosn't say it works with Nissans, just many imports, Thanks for your help guys.