5th Gen "I AM NEW HERE BUT HAVE A QUESTION" thread
11-23-2010, 06:12 PM
Hmmm...new issue to me. Perhaps you may have an internal problem with your tranny preventing it from shifting. I would take it to a shop or dealer and see what they say. Hopefully it is nothing too serious.
I found out what's causing the shifting issue: the horizontal shaft in the shift rod that moves up and down with the thumb lever is sticking in the bottom position. For instance, press thumb lever, shift to D and the pin gets stuck in the down position. This allows you to bump the shift into reverse without pressing the thumb lever again. Also keeps the key in the ignition when you park as the pin comes up and actuates some plastic levers and a mechanical piece running to the ignition.
Looks like there is white lithium grease surround the pin. I sprayed with WD40 to see if things would loosen up...nope.
Any ideas?
I keep seeing DaveB's name. I need new coils anyway, maybe he'd have an idea on this one.
Looks like there is white lithium grease surround the pin. I sprayed with WD40 to see if things would loosen up...nope.
Any ideas?
I keep seeing DaveB's name. I need new coils anyway, maybe he'd have an idea on this one.
11-23-2010, 06:14 PM
Sounds like you got a problem with an ABS sensor or sensors. The dealer can diagnose which sensor is the problem, or sensors. I'm not sure if other shops have the capability.
11-23-2010, 06:16 PM
The pre-cats are located just after the exhaust downpipes from the engine. They are easy to spot as they are fatter parts of the exhaust with heat shields. The main cat is located about a foot down from the rear pre-cat. It is a fatter part of the exhaust with a heat shield.
11-23-2010, 07:12 PM
Newbie - Just Registered
Join Date: Nov 2010
Location: Victoria, BC, CAN
Posts: 2
Try and do a reset:
Sounds like they didn't replace the ABS sensor for that rear tire when he got into a accident.
- Turn the ignition key on for seven seconds (the length of time the airbag light stays solidly on).
- Turn the ignition off within 1 second.
- Wait at least three seconds to turn ignition back on.
- Repeat these steps two more times (three total).
Sounds like they didn't replace the ABS sensor for that rear tire when he got into a accident.
11-25-2010, 08:54 PM
Newbie - Just Registered
Join Date: Nov 2010
Location: new york
Posts: 4
Hi i am new here i just joined i bought a nissan maxima se 20th anniversary edition 2001 i had some question's im having problems finding some parts i need cause when i look it say's the part does not fit GLE or 20th anniversary edition i'm new to nissan's this being my first after having mainly honda's.i just joined here i am not sure how forum work's.i am looking for a mesh grill for my maxima and if anyone else has the 20th anniversary edition i had some question's.i have the bose system and the subwoofer cut's out sometimes is that normal and how do you fix it.
11-25-2010, 09:26 PM
Member
Join Date: Oct 2010
Location: Mississauga, ON, Canada
Posts: 48
Hi i am new here i just joined i bought a nissan maxima se 20th anniversary edition 2001 i had some question's im having problems finding some parts i need cause when i look it say's the part does not fit GLE or 20th anniversary edition i'm new to nissan's this being my first after having mainly honda's.i just joined here i am not sure how forum work's.i am looking for a mesh grill for my maxima and if anyone else has the 20th anniversary edition i had some question's.i have the bose system and the subwoofer cut's out sometimes is that normal and how do you fix it.
If you'd like, I'd advise you to go around that shiftice site, it's like this org's holy bible. Hope that helps!
- Marvin
11-25-2010, 10:34 PM
Newbie - Just Registered
Join Date: Nov 2010
Location: new york
Posts: 4
thank you for your help marvin there is alot of threads on here i tried finding one for my 2001 nissan maxima se 20th anniversary edition but could not find one cause i wanted to talk to someone who had one cause it's hard finding some parts for mine or the GLE i wanted to know if someone knows where to get a mesh grill for it i tried looking but there for other 2001's except GLE or 20th anniversary edition.i looked on ebay could not find anything.does anyone know if the grill's are the same for all the 2001's maxima?
11-26-2010, 07:18 AM
Senior Member
Join Date: May 2008
Location: Moore, OK
Posts: 1,767
thank you for your help marvin there is alot of threads on here i tried finding one for my 2001 nissan maxima se 20th anniversary edition but could not find one cause i wanted to talk to someone who had one cause it's hard finding some parts for mine or the GLE i wanted to know if someone knows where to get a mesh grill for it i tried looking but there for other 2001's except GLE or 20th anniversary edition.i looked on ebay could not find anything.does anyone know if the grill's are the same for all the 2001's maxima?
11-27-2010, 05:56 AM
Newbie - Just Registered
Join Date: Nov 2010
Posts: 1
Hello, I just bought a 2000 SE model last night and I noticed this morning that the radiator support is pretty much rusted through. From reading these boards I see that it is a fairly common problem but I am trying to decide if it is significant enough to return the vehicle for a refund. I paid 6k out the door which seemed to be fair considering the rest of the car is in good shape and is fully loaded and has 99k miles.
Should I head back to the dealership and return this car?
*UPDATE*
Took the car back
Should I head back to the dealership and return this car?
*UPDATE*
Took the car back
Last edited by Cjwilson; 11-27-2010 at 10:06 AM.
11-28-2010, 08:20 AM
Junior Member
Join Date: Jun 2010
Posts: 32
11-28-2010, 09:12 AM
Uh, it could fully go out any time, and then it's gonna be hard to drive. I wouldn't take the chance, but that might just be me...
11-29-2010, 04:29 AM
Senior Member
Join Date: May 2008
Location: Moore, OK
Posts: 1,767
PIAA Sport Horns (500/600mhz). You can get them off Amazon for about $35-40. Andd when you say you don't want to replace OEM, are you wanting aftermarket along with stock? If so, you vehicles stock horn wiring may not support the additional load. These PIAA are just about a direct replacement. I had them in my vehicle before the accident.
11-29-2010, 07:34 AM
11-29-2010, 01:20 PM
Junior Member
Join Date: Jun 2010
Posts: 32
11-29-2010, 03:45 PM
http://www.moodym.com/maxima/tech/maxbulbchart.html
11-29-2010, 04:29 PM
Senior Member
Join Date: May 2008
Location: Moore, OK
Posts: 1,767
11-29-2010, 05:07 PM
Ok so i am looking for a double din receiver that has Bluetooth for audio streaming and hand free. I came across this clarion for a great price and I was wondering if anyone had any experience with the HU or has any insight on the subject. Thanks.
http://www.amazon.com/Clarion-VX400-...pr_product_top
http://www.amazon.com/Clarion-VX400-...pr_product_top
11-29-2010, 06:33 PM
Member
Join Date: Jul 2010
Location: Methuen, MA
Posts: 125
one more quick thing. I need to make another key for my 2000, anyone have or know about this one?
http://www.carandtruckremotes.com/20...akeyblank.html
I like how its only 20 bucks and has a nice silver burger right on the key, better than most transponder blanks ive seen
http://www.carandtruckremotes.com/20...akeyblank.html
I like how its only 20 bucks and has a nice silver burger right on the key, better than most transponder blanks ive seen
11-29-2010, 06:39 PM
Senior Member
Join Date: Aug 2008
Location: Brandon, FL
Posts: 897
one more quick thing. I need to make another key for my 2000, anyone have or know about this one?
http://www.carandtruckremotes.com/20...akeyblank.html
I like how its only 20 bucks and has a nice silver burger right on the key, better than most transponder blanks ive seen
http://www.carandtruckremotes.com/20...akeyblank.html
I like how its only 20 bucks and has a nice silver burger right on the key, better than most transponder blanks ive seen
11-29-2010, 07:39 PM
Member
Join Date: Jul 2010
Location: Methuen, MA
Posts: 125
The stealership programed my eBay flip key so they should definitely do this one for me. There's also a couple automotive locksmiths I can go to. Does the key I postEd in the link look decent to anybody?
11-30-2010, 09:50 AM
Ok so i am looking for a double din receiver that has Bluetooth for audio streaming and hand free. I came across this clarion for a great price and I was wondering if anyone had any experience with the HU or has any insight on the subject. Thanks.
http://www.amazon.com/Clarion-VX400-...pr_product_top
http://www.amazon.com/Clarion-VX400-...pr_product_top
11-30-2010, 10:16 AM
Newbie - Just Registered
Join Date: Nov 2010
Posts: 7
2000 stock front coil springs.
Hello all, I'm in need of a set of stock front springs and can't seem to locate a pair. Does Anyone here have a set they are willing to part with even if used but low miles a plus. PM me with a price. Thanks
12-01-2010, 10:15 AM
Newbie - Just Registered
Join Date: Feb 2009
Posts: 2
Alright Im new Ive got a 00 maxima se stock to the fullest extent and im gonna have the car for long long time. But im looking to swap from a auto to a manual, ive searched this site and found useful info but what im looking for, so if anyone can direct me and or tell me the best way to swap and whats needed id appreciate it! Word from the 801
12-01-2010, 12:07 PM
Senior Member
Join Date: Jan 2010
Posts: 828
my maxi of 7 yrs is finally leaking oil. Its been making some funny sounds and Im really worried for its life. The leak is coming from directly under the engine, I was told the gasket is bad...but not really sure. Its been making a humming/buzzing sound when I accelerate..typically at low speeds. I just broke 167k miles. So I am really just wanting to keep the car until its no longer functional, but I dont see that happening for awhile. I recently had a power steering issue in the past, but that was fixed. Anyone have comments or anything that can advise me in the right direction?
12-01-2010, 02:28 PM
Newbie - Just Registered
Join Date: Nov 2010
Location: Orlando, Fl
Posts: 13
I've done alot of research and i can really find the detailed answers im looking for. Here it goes:
I just bought 350z rims and decided i wanted to lower the car. After researching H-techs will give me the smooth ride and moderate drop i was looking for (Im ok with a floaty feeling as long as im not bottoming out everywhere). Now i was looking for which strut is the best combination with the h-techs AND what other things should i replace at the same time (bump stops, strut plates ect.) so i dont have to go back down there again. And how much should i cut the bump stops? thanks for the help guys
I just bought 350z rims and decided i wanted to lower the car. After researching H-techs will give me the smooth ride and moderate drop i was looking for (Im ok with a floaty feeling as long as im not bottoming out everywhere). Now i was looking for which strut is the best combination with the h-techs AND what other things should i replace at the same time (bump stops, strut plates ect.) so i dont have to go back down there again. And how much should i cut the bump stops? thanks for the help guys
12-01-2010, 02:50 PM
Member
Join Date: Jul 2010
Location: Methuen, MA
Posts: 125
I'm looking for a write up on how I can get a "chirp" sound like in an aftermaket alarm when i lock my 5.0 gen instead of the horn sound it has stock, without buying a whole new alarm system...is there any easy cheap mods to achieve this?
12-01-2010, 04:37 PM
Junior Member
Join Date: Aug 2010
Location: Orlando, Fl
Posts: 38
12-01-2010, 05:00 PM
Junior Member
Join Date: Nov 2010
Location: Atlanta, Ga
Posts: 44
Hi,
I just bought a 2000 Maxima GLE. I would like to know if there is a (Thread) list of parts here that are interchangeable with this model. Navigation, Seats, Auto Shifter update, and etc. Has anyone put the 2010 maxima seats in the 00-03 maxima or G35 heated seats? I have done some searching but, I think I could be failing at it. I am not familiar with this car at all, if it was a 540i I would be golden but, I am new to the nissan game. Please help. You can send pm's so I can find what you have to say.
Thanks,
Slow Motion | Atlanta,Ga.
I just bought a 2000 Maxima GLE. I would like to know if there is a (Thread) list of parts here that are interchangeable with this model. Navigation, Seats, Auto Shifter update, and etc. Has anyone put the 2010 maxima seats in the 00-03 maxima or G35 heated seats? I have done some searching but, I think I could be failing at it. I am not familiar with this car at all, if it was a 540i I would be golden but, I am new to the nissan game. Please help. You can send pm's so I can find what you have to say.
Thanks,
Slow Motion | Atlanta,Ga.
12-02-2010, 12:29 PM
This has probably been asked and answered, but I can't seem to find the best search parameters. I am wondering if anyone has any recommendations for a Nissan repair place in Nassau or Suffolk county, Long Island?
I did find someone say that Westbury Nissan was good, but that was a thread that was 8 years old.
I did find someone say that Westbury Nissan was good, but that was a thread that was 8 years old.
12-02-2010, 02:58 PM
Hi,
I just bought a 2000 Maxima GLE. I would like to know if there is a (Thread) list of parts here that are interchangeable with this model. Navigation, Seats, Auto Shifter update, and etc. Has anyone put the 2010 maxima seats in the 00-03 maxima or G35 heated seats? I have done some searching but, I think I could be failing at it. I am not familiar with this car at all, if it was a 540i I would be golden but, I am new to the nissan game. Please help. You can send pm's so I can find what you have to say.
Thanks,
Slow Motion | Atlanta,Ga.
I just bought a 2000 Maxima GLE. I would like to know if there is a (Thread) list of parts here that are interchangeable with this model. Navigation, Seats, Auto Shifter update, and etc. Has anyone put the 2010 maxima seats in the 00-03 maxima or G35 heated seats? I have done some searching but, I think I could be failing at it. I am not familiar with this car at all, if it was a 540i I would be golden but, I am new to the nissan game. Please help. You can send pm's so I can find what you have to say.
Thanks,
Slow Motion | Atlanta,Ga.