5th Gen "I AM NEW HERE BUT HAVE A QUESTION" thread
#201
2000: 3.0, 210hp V-6, non-HID head lights.
2001: 3.0, 210hp V-6, non-HID head lights
2001 AE: 3.0: 222 hp V-6, non-HID head lights (but AE'd...)
2002 and 2003: 3.5 liter, 255hp V-6, HID lights.
there's some other differences and I'm probably off a few hp on the 2000 and 2001 models, but there it is in a nutshell.
2001: 3.0, 210hp V-6, non-HID head lights
2001 AE: 3.0: 222 hp V-6, non-HID head lights (but AE'd...)
2002 and 2003: 3.5 liter, 255hp V-6, HID lights.
there's some other differences and I'm probably off a few hp on the 2000 and 2001 models, but there it is in a nutshell.
#202
Bose HU Swallowed CD- Can it be retrieved?
My 6 disc changer swallowed a cd and won't spit it back out. I know for a fact it's in there but is no longer showing when I push eject for any of the trays. From what I was told (happened while I wasn't in the car- lucky for them, unlucky me) it seems possible the cd wasn't put in correctly and might not have been aligned to fit any of the cd trays right. Originally there was an error showing on the display, but no error number provided. After turning off the car and then starting it back up, no more error and cd changer works. I think, however, that I heard a popping sound once, maybe the cd breaking?
Anyway, question is, since removing the HU from the dash reveals the backside of the CD changer section, judging from the how to pics, if I removed the HU from the dash, would the cd or its broken shards come out from the back end? This is assuming it didn't make it into a cd tray. Of course not knowing how the changer is designed, maybe I'm way off base. Just wondering if this might let me get the cd out or any broken pieces.
Thanks in advance.
P.S. I've heard the Bose HU is lousy, but no plans to upgrade yet. I've never had any of the problems mentioned about the HU until this mishap.
Anyway, question is, since removing the HU from the dash reveals the backside of the CD changer section, judging from the how to pics, if I removed the HU from the dash, would the cd or its broken shards come out from the back end? This is assuming it didn't make it into a cd tray. Of course not knowing how the changer is designed, maybe I'm way off base. Just wondering if this might let me get the cd out or any broken pieces.
Thanks in advance.
P.S. I've heard the Bose HU is lousy, but no plans to upgrade yet. I've never had any of the problems mentioned about the HU until this mishap.
#203
Trunk pop and lift angle?
I'm wondering, when the trunk release is depressed and the trunk unlocks and pops open, exactly how high does your trunk lid go? My Max had a minor rear end collision (didn't look bad from the outside and the bar under the rear of the car wasn't broken) and the body shop is saying since it's '02, I shouldn't expect the trunk lid to pop open and lift up any. Basically, when I unlock the trunk, I hear the pop but get no real lift. Is that normal?
#204
Originally Posted by GBAUER
2000: 3.0, 222hp V-6, non-HID head lights.
2001: 3.0, 222hp V-6, non-HID head lights
2001 AE: 3.0: 227 hp V-6, non-HID head lights (but AE'd...)
2002 and 2003: 3.5 liter, 255hp V-6, HID lights.
2001: 3.0, 222hp V-6, non-HID head lights
2001 AE: 3.0: 227 hp V-6, non-HID head lights (but AE'd...)
2002 and 2003: 3.5 liter, 255hp V-6, HID lights.
#205
Guest
Posts: n/a
Can I get a few opinions of this electric Supercharger and if I should get it...
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Thanks for your time
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Thanks for your time
#206
the org...not what it was
iTrader: (8)
Join Date: May 2004
Location: Communist Wealth of Virginia
Posts: 8,143
Originally Posted by Nineleven
Can I get a few opinions of this electric Supercharger and if I should get it...
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Thanks for your time
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Thanks for your time
#207
Originally Posted by GBAUER
2000: 3.0, 222hp V-6, non-HID head lights.
2001: 3.0, 222hp V-6, non-HID head lights
2001 AE: 3.0: 227 hp V-6, non-HID head lights (but AE'd...)
2002 and 2003: 3.5 liter, 255hp V-6, HID lights.
The only other difference is that the 02-03 engine likes to burn, leak, or lose oil in huge amounts.....
2001: 3.0, 222hp V-6, non-HID head lights
2001 AE: 3.0: 227 hp V-6, non-HID head lights (but AE'd...)
2002 and 2003: 3.5 liter, 255hp V-6, HID lights.
The only other difference is that the 02-03 engine likes to burn, leak, or lose oil in huge amounts.....
#208
Originally Posted by maximashine
I'm wondering, when the trunk release is depressed and the trunk unlocks and pops open, exactly how high does your trunk lid go? My Max had a minor rear end collision (didn't look bad from the outside and the bar under the rear of the car wasn't broken) and the body shop is saying since it's '02, I shouldn't expect the trunk lid to pop open and lift up any. Basically, when I unlock the trunk, I hear the pop but get no real lift. Is that normal?
#209
Originally Posted by Nineleven
Can I get a few opinions of this electric Supercharger and if I should get it...
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Thanks for your time
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Thanks for your time
#210
Guest
Posts: n/a
Originally Posted by alicious
your kidding right?
No, Im not
Please enlighten me...
Seems to be getting positive responses from people who purchased them...
One guy said he shaved 2 seconds off his 0-60 times with it on
http://feedback.ebay.com/ebaymotors/...oneytalks2jenr
???
#211
Guest
Posts: n/a
Originally Posted by irish44j
no, you should not...it is total B.S. and does nothing.
Hey listen, Im not tryin to bs anyone here or anything, but I've just REALLY gotten into the mechanics part of the game and what everything does, so Im still learning..
So bare with, please..
I just wanted someone to explain WHY such a mod wouldnt work, and the reason others may be having success using such a part?
#212
Mounting points for motor mounts same on G35 motor?
Hi Guys,
I have 3 bad ring on my motor so I decided to replace the engine, the problem is that I found a 2003 G35 motor for cheap and I want to make sure I will be able to install my motor mounts to this block ... I know the mounts for the G35 are not the same because the engine is not in the same position for RWD but does the mounting points are the same.
I really need to get an answer as soon as possible.
Thanks for your help!
I have 3 bad ring on my motor so I decided to replace the engine, the problem is that I found a 2003 G35 motor for cheap and I want to make sure I will be able to install my motor mounts to this block ... I know the mounts for the G35 are not the same because the engine is not in the same position for RWD but does the mounting points are the same.
I really need to get an answer as soon as possible.
Thanks for your help!
#213
Originally Posted by Nineleven
Hey listen, Im not tryin to bs anyone here or anything, but I've just REALLY gotten into the mechanics part of the game and what everything does, so Im still learning..
So bare with, please..
I just wanted someone to explain WHY such a mod wouldnt work, and the reason others may be having success using such a part?
So bare with, please..
I just wanted someone to explain WHY such a mod wouldnt work, and the reason others may be having success using such a part?
There are several things to avoid on ebay:
1. electric superchargers
2. turbonator
3. anything that costs under $200 that claims power gains of more than 3 hp.
#214
Originally Posted by Nineleven
No, Im not
Please enlighten me...
Seems to be getting positive responses from people who purchased them...
One guy said he shaved 2 seconds off his 0-60 times with it on
http://feedback.ebay.com/ebaymotors/...oneytalks2jenr
???
Please enlighten me...
Seems to be getting positive responses from people who purchased them...
One guy said he shaved 2 seconds off his 0-60 times with it on
http://feedback.ebay.com/ebaymotors/...oneytalks2jenr
???
the bottom line is: there are many, many people on this forum who have done every mod possible to make their cars faster. Not a single person on here would bolt that garbage onto their car - because it won't do anything. It's simple physics.
#215
Originally Posted by alicious
your kidding right?
#216
Originally Posted by Jayphil82
Hi Guys,
I have 3 bad ring on my motor so I decided to replace the engine, the problem is that I found a 2003 G35 motor for cheap and I want to make sure I will be able to install my motor mounts to this block ... I know the mounts for the G35 are not the same because the engine is not in the same position for RWD but does the mounting points are the same.
I really need to get an answer as soon as possible.
Thanks for your help!
I have 3 bad ring on my motor so I decided to replace the engine, the problem is that I found a 2003 G35 motor for cheap and I want to make sure I will be able to install my motor mounts to this block ... I know the mounts for the G35 are not the same because the engine is not in the same position for RWD but does the mounting points are the same.
I really need to get an answer as soon as possible.
Thanks for your help!
#217
Guest
Posts: n/a
Originally Posted by irish44j
I wasn't flaming you. I was telling you straight=up that it is bogus. All it is is basically an electric fan. It does not have the power or velocity to create any "boost pressure" the way a turbo or supercharger does. Anything they claim on their site is bull. NOBODY is having "success" using that, and if they say they are they're full of crap. .
Hey Irish, I didnt mean to come off at all like that, but I do appreciate your honest reply
Originally Posted by irish44j
There are several things to avoid on ebay:
3. anything that costs under $200 that claims power gains of more than 3 hp.
3. anything that costs under $200 that claims power gains of more than 3 hp.
Actually, I might have to disagree with ya on that one...hehe..
I bought a Chip on Ebay, and believe me, I know most of the "chips"/modules on there ARE bs...But I bought this one, that is SERIOUSLY legit..
http://cgi.ebay.com/ebaymotors/ws/eB...category=33597
I've not had the time to open it up and find out what exactly IS inside, but it has added a very noticeable gain to low end torque and Hp
I hooked mine up to my Ecu through my Intake sensor and I really caint complain, I've noticed a CONSIDERABLE differnce....
And no, it isnt those garbage "dummy" resonators u normally see, so you should check it out for yourself sometime
Take care,
Justin
#218
Originally Posted by Nineleven
I've not had the time to open it up and find out what exactly IS inside, but it has added a very noticeable gain to low end torque and Hp
Justin
Justin
Since you claim it works, I suggest you actually open it up and take a picture of what's inside.....
#220
Originally Posted by Nineleven
That i can do!
Just wish I had a place to Dyno test in my area
Just wish I had a place to Dyno test in my area
http://www.dynojet.com/maps/autodynos/oh.htm
#221
Guest
Posts: n/a
Originally Posted by irish44j
I don't know which of these places are in your area, but here's where to start looking:
http://www.dynojet.com/maps/autodynos/oh.htm
http://www.dynojet.com/maps/autodynos/oh.htm
HEY! Thank you very much...that was very nice of you
MD Motorsports
10720 Makro Dr. Suite A
Cincinnati 45241
Tel: 513-554-1777
Sounds like we got a winner
#222
WTF is the deal with checking the oil? If I check the side of the dipstick with the 'min' and 'max' markings, I can fairly clearly make out an oil level in between those two marks.
But if I check on the back side of that same flat dipstick, it looks as if the oil is much higher on the stick and the level is much harder to read. Sooo whiskey tango foxtrot?
I don't want to overfill my crankcase! I assume that since the stick is designed to only go in one way, there is only one side of the stick (w/the markings) that I need to pay any attention to, and that the other side of the stick always gets random oil smeared on it as I remove the stick from the engine. Is this right?
I recall my old 1982 Datsun pickup also had a cantankerous dipstick as well.
But if I check on the back side of that same flat dipstick, it looks as if the oil is much higher on the stick and the level is much harder to read. Sooo whiskey tango foxtrot?
I don't want to overfill my crankcase! I assume that since the stick is designed to only go in one way, there is only one side of the stick (w/the markings) that I need to pay any attention to, and that the other side of the stick always gets random oil smeared on it as I remove the stick from the engine. Is this right?
I recall my old 1982 Datsun pickup also had a cantankerous dipstick as well.
#223
Originally Posted by GBAUER
2000: 3.0, 222hp V-6, non-HID head lights.
2001: 3.0, 222hp V-6, non-HID head lights
2001 AE: 3.0: 227 hp V-6, non-HID head lights (but AE'd...)
2002 and 2003: 3.5 liter, 255hp V-6, HID lights.
The only other difference is that the 02-03 engine likes to burn, leak, or lose oil in huge amounts.....
ok so i defitnetly want either a 2002 or a 2003. is there much difference between these two??? which one has a 6speed manual. give me insights on the 2002 and 2003. i just dont see the idea in getting into a more expensive 2003 if it has the same features in motor, interior and exterior as a 2002.
2000: 3.0, 222hp V-6, non-HID head lights.
2001: 3.0, 222hp V-6, non-HID head lights
2001 AE: 3.0: 227 hp V-6, non-HID head lights (but AE'd...)
2002 and 2003: 3.5 liter, 255hp V-6, HID lights.
The only other difference is that the 02-03 engine likes to burn, leak, or lose oil in huge amounts.....
ok so i defitnetly want either a 2002 or a 2003. is there much difference between these two??? which one has a 6speed manual. give me insights on the 2002 and 2003. i just dont see the idea in getting into a more expensive 2003 if it has the same features in motor, interior and exterior as a 2002.
#225
My Bose ATE the CD, can anyone help?
Originally Posted by irish44j
yes, that is normal. Mine just pops but doesn't raise itself at all.
Any takers on my Bose HU gobbling up a cd? I don't know if I'm allowed to repost it so it's question #202 of this thread.
Thanks.
#226
Will a G35 block fit in a maxima? I know the motor mounts will not fit be will I be able to install my motor mounts on that engine?
I tought that maybe it was only the motor mounts that could be different and that the fixing point would be the same...
Originally Posted by irish44j
I seriously doubt that the mounts are the same, since teh G engine is mounted longitudinally and ours are transversely-mounted.
#227
If it's a matter of you finding a good deal on the G35 engine, you should be able to also find a good deal on an engine specifically for the maxima as well with a bit of searching. Many of the 4th generation guys are doing 3.5 swaps, so they're getting their motors from someplace. Maybe try a junkyard or online.
#228
Originally Posted by maximashine
Any takers on my Bose HU gobbling up a cd?
Thanks.
Thanks.
#229
Originally Posted by DJ Kaanco
ok so i defitnetly want either a 2002 or a 2003. is there much difference between these two???
Originally Posted by DJ Kaanco
which one has a 6speed manual.
Originally Posted by DJ Kaanco
give me insights on the 2002 and 2003. i just dont see the idea in getting into a more expensive 2003 if it has the same features in motor, interior and exterior as a 2002.
Good luck.
#230
Originally Posted by matt_aitchison
I Have A Question For My 20th Anniversary Maxima. Can A Clogged Fuel Filter Cause Missfiring, Also How Ofter Should You Change Your Fuel Filter?
#232
Thanks for the reply. I searched the threads but guess I missed this one. Thanks again.
Originally Posted by SEmy2K2go
Try this thread - http://forums.maxima.org/showthread.php?t=456351
#233
Originally Posted by DJ Kaanco
ok thanks. so performance wise the 2002 and 2003 maxima se are the same??? whats a titanium package?
The Titanium Edition Package was a new option available only on 2003 SE models. The Titanium Edition Package features a Bose audio system with AM/FM in-dash 6-disc CD changer, front seat side-impact supplemental air bags, in-mirror compass, floor mats and stainless steel sill plates with Maxima logo. It also offers titanium-tint color accents on the center console, titanium-tint accent stitching on the steering wheel and shifter, and alloy wheels with bright wheel finish.
As Nissan puts it
#234
Originally Posted by Jayphil82
Will a G35 block fit in a maxima? I know the motor mounts will not fit be will I be able to install my motor mounts on that engine?
I tought that maybe it was only the motor mounts that could be different and that the fixing point would be the same...
I tought that maybe it was only the motor mounts that could be different and that the fixing point would be the same...
#235
Originally Posted by irish44j
You could be right - I have no actual knowledge of the G35 engine - I'm just speculating based on the FF vs. FR layout of the respective cars. The mounts would probably be oriented in different directions, at very least.
#236
Yes same 3.5 Engine.
The Titanium Edition Package was a new option available only on 2003 SE models. The Titanium Edition Package features a Bose audio system with AM/FM in-dash 6-disc CD changer, front seat side-impact supplemental air bags, in-mirror compass, floor mats and stainless steel sill plates with Maxima logo. It also offers titanium-tint color accents on the center console, titanium-tint accent stitching on the steering wheel and shifter, and alloy wheels with bright wheel finish.
As Nissan puts it
The Titanium Edition Package was a new option available only on 2003 SE models. The Titanium Edition Package features a Bose audio system with AM/FM in-dash 6-disc CD changer, front seat side-impact supplemental air bags, in-mirror compass, floor mats and stainless steel sill plates with Maxima logo. It also offers titanium-tint color accents on the center console, titanium-tint accent stitching on the steering wheel and shifter, and alloy wheels with bright wheel finish.
As Nissan puts it
#237
Originally Posted by Succinct
WTF is the deal with checking the oil? If I check the side of the dipstick with the 'min' and 'max' markings, I can fairly clearly make out an oil level in between those two marks.
But if I check on the back side of that same flat dipstick, it looks as if the oil is much higher on the stick and the level is much harder to read. Sooo whiskey tango foxtrot?
I don't want to overfill my crankcase! I assume that since the stick is designed to only go in one way, there is only one side of the stick (w/the markings) that I need to pay any attention to, and that the other side of the stick always gets random oil smeared on it as I remove the stick from the engine. Is this right?
I recall my old 1982 Datsun pickup also had a cantankerous dipstick as well.
But if I check on the back side of that same flat dipstick, it looks as if the oil is much higher on the stick and the level is much harder to read. Sooo whiskey tango foxtrot?
I don't want to overfill my crankcase! I assume that since the stick is designed to only go in one way, there is only one side of the stick (w/the markings) that I need to pay any attention to, and that the other side of the stick always gets random oil smeared on it as I remove the stick from the engine. Is this right?
I recall my old 1982 Datsun pickup also had a cantankerous dipstick as well.
:attention
#240
Originally Posted by Trevor28
Hey on the 2000 Maxima, is there a way to retract the rear seat belt into its compartment? The one in the middle that is. Usually , you pull on it the belt and it retracts. Thank you