5th Gen "I AM NEW HERE BUT HAVE A QUESTION" thread
#2602
Better keep it well under 1500 lbs.
Originally Posted by kevinhcraig
I have a 2003 Maxima and recently installed a trailer hitch. Does anyonehave any idea what the maximum towing capacity is? I am trying to keep it below 1500 lbs.
#2603
the org...not what it was
iTrader: (8)
Join Date: May 2004
Location: Communist Wealth of Virginia
Posts: 8,143
Originally Posted by eddie_D
Quick question whats the bulb size for the map light and the dome light. For a 2001 Se. I remember readint it somewhere, just can't find it again. Thanks in advance.
Dome light
DE3175
....not sure about that map light
#2606
Originally Posted by choopster
would a 2002 maxima front door fit in a 2001 maxima?
thx
thx
#2607
Originally Posted by eddie_D
Quick question whats the bulb size for the map light and the dome light. For a 2001 Se. I remember readint it somewhere, just can't find it again. Thanks in advance.
http://www.moodym.com/maxima/tech/maxbulbchart.html
#2608
Can somebody get me the part number for the splashguard/engine undercover plastic piece for the passenger side. Its not the fender cover, I know what that is. There should be two of these pieces, driver & passenger-side. I just need the one. Is there a factory parts list PDF? I have the service manual PDF.
I prefer to order from everythingnissan.com if available.
'01 Nissan Maxima A33 GXE
I prefer to order from everythingnissan.com if available.
'01 Nissan Maxima A33 GXE
#2609
Originally Posted by Memphis2k1
Can somebody get me the part number for the splashguard/engine undercover plastic piece for the passenger side. Its not the fender cover, I know what that is. There should be two of these pieces, driver & passenger-side. I just need the one. Is there a factory parts list PDF? I have the service manual PDF.
I prefer to order from everythingnissan.com if available.
'01 Nissan Maxima A33 GXE
I prefer to order from everythingnissan.com if available.
'01 Nissan Maxima A33 GXE
So your saying it's not part #10 in the picture above?
#2610
Originally Posted by Kyle00
So your saying it's not part #10 in the picture above?
I think the people that clean my underground parking got rid of it while I had it off.
#2611
Correct, there should be 3 or so of those plastic popout pins that start at the bottom of the front bumper and go to about where the oil filter is.
I think the people that clean my underground parking got rid of it while I had it off.
I think the people that clean my underground parking got rid of it while I had it off.
I'll let you know if i spot something
#2614
has anyone put Q45 brakes on a 5.5 gen i see alot on 4th gens and as for whats needed its the calipers with torque member from q45/j30 relocation brackets centering ring and 13" cobra rotors do the rotors need to be machined?
#2615
Originally Posted by MR.Large
has anyone put Q45 brakes on a 5.5 gen i see alot on 4th gens and as for whats needed its the calipers with torque member from q45/j30 relocation brackets centering ring and 13" cobra rotors do the rotors need to be machined?
#2616
the org...not what it was
iTrader: (8)
Join Date: May 2004
Location: Communist Wealth of Virginia
Posts: 8,143
Originally Posted by Memphis2k1
Can somebody get me the part number for the splashguard/engine undercover plastic piece for the passenger side. Its not the fender cover, I know what that is. There should be two of these pieces, driver & passenger-side. I just need the one. Is there a factory parts list PDF? I have the service manual PDF.
I prefer to order from everythingnissan.com if available.
'01 Nissan Maxima A33 GXE
I prefer to order from everythingnissan.com if available.
'01 Nissan Maxima A33 GXE
http://replacement.autopartswarehous...Shield&dp=true
#2617
Exhaust Question
I'm not very "mechanically inclined" so I am very limited on knowledge. I've been looking for a Cat Back Exhaust for a 2002 Maxima GLE. All I've been able to find online really are for the SE edition only I.E Greddy. Does anyone know of or where I can find any decent performance Cat Back Exhausts for the GLE. The normal stock parts are running about 750 from my mechanic but I've been seeing alot of after market systems for $350-$600, unfortunatly have yet to find one that is said to fit the GLE model.
#2618
Originally Posted by Tension710
I'm not very "mechanically inclined" so I am very limited on knowledge. I've been looking for a Cat Back Exhaust for a 2002 Maxima GLE. All I've been able to find online really are for the SE edition only I.E Greddy. Does anyone know of or where I can find any decent performance Cat Back Exhausts for the GLE. The normal stock parts are running about 750 from my mechanic but I've been seeing alot of after market systems for $350-$600, unfortunatly have yet to find one that is said to fit the GLE model.
Theres no structural difference between SE, GLE, GLX models. Differences in them are stiffer suspension and add on options.
#2624
the org...not what it was
iTrader: (8)
Join Date: May 2004
Location: Communist Wealth of Virginia
Posts: 8,143
Originally Posted by Tension710
I'm not very "mechanically inclined" so I am very limited on knowledge. I've been looking for a Cat Back Exhaust for a 2002 Maxima GLE. All I've been able to find online really are for the SE edition only I.E Greddy. Does anyone know of or where I can find any decent performance Cat Back Exhausts for the GLE. The normal stock parts are running about 750 from my mechanic but I've been seeing alot of after market systems for $350-$600, unfortunatly have yet to find one that is said to fit the GLE model.
#2625
Exhaust Question Again
If I were to purchase this Cat Back Exhaust From Megan Racing
http://www.wesellcarparts.com/store/...idproduct=5078
would I need to replace anything else or would that fit on my car being as everything else
is pretty much stock. I've been seeing alot of ppl talking about "Y pipes" and I'm not sure
if that would have anything to do with the exhaust. I just don't wanna go and buy this exhaust to find out
later I have to then replace other things or that I had just wasted money on a product I couldn't use.
http://www.wesellcarparts.com/store/...idproduct=5078
would I need to replace anything else or would that fit on my car being as everything else
is pretty much stock. I've been seeing alot of ppl talking about "Y pipes" and I'm not sure
if that would have anything to do with the exhaust. I just don't wanna go and buy this exhaust to find out
later I have to then replace other things or that I had just wasted money on a product I couldn't use.
#2627
Originally Posted by Memphis2k1
Bingo is right! #10 is the correct piece.
Where did you get that picture from? Service Manual?
I just installed a new alternator and would be nice to get that piece keep out the water (and snow).
Where did you get that picture from? Service Manual?
I just installed a new alternator and would be nice to get that piece keep out the water (and snow).
http://www.trademotion.com/partlocat...10&catalogid=2
#2628
the org...not what it was
iTrader: (8)
Join Date: May 2004
Location: Communist Wealth of Virginia
Posts: 8,143
Originally Posted by Tension710
Thnx Alicious, not really looking for numbers atm just looking to replace a broken exhaust. would you have any links to the cattman cat back?
http://forums.maxima.org/showthread.php?t=531135
#2630
Originally Posted by RadManPL
I bought a 2001 Maxima just about a couple of weeks ago, but I don't know what model it is, SE, etc. Is there a way to find out?
#2632
Originally Posted by RadManPL
That's the thing, it doesn't.
#2633
Originally Posted by Kyle00
Off the top of my head, the easiest way to tell would be the wheels. If they are the 17" 7 spoke wheels, it's an SE. If they are the 16" 5 spoke, it's a GLE. I think the other wheel came on both the GLE and the GXE