5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

No start...towed

Thread Tools
 
Search this Thread
 
Old 03-22-2009, 07:31 AM
  #1  
Member
Thread Starter
 
@NgRyM@XiM@'s Avatar
 
Join Date: Jul 2002
Location: DMV
Posts: 292
No start...towed

Last night, my 01/117K mile wouldn't start. I was getting power (i.e. light; radio; air) but she would not turn over at all. No noise, no clicking....nothing. The gas pedal was stiff.

I'm thinking the starter may have gone but want to throw this out to the experts to see if you guys have experience this as well. If so, what solution you arrived to.

Thanks.
@NgRyM@XiM@ is offline  
Old 03-22-2009, 08:08 AM
  #2  
No more Maximas...
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
4AT or 6MT?

Have you tried anything yet? Bypassing the clutch switch or trying to start the car in something other than Park? Check the connections to the starter?
pmohr is offline  
Old 03-22-2009, 08:13 AM
  #3  
It's business time.
iTrader: (26)
 
Progress's Avatar
 
Join Date: Oct 2003
Location: Buffalo, NY
Posts: 3,294
When my car did that it was the immobilizer that went.
Progress is offline  
Old 03-22-2009, 08:16 AM
  #4  
No more Maximas...
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by Progress
When my car did that it was the immobilizer that went.
The immobilizer will only prevent it from starting, not from cranking.
pmohr is offline  
Old 03-22-2009, 08:23 AM
  #5  
It's business time.
iTrader: (26)
 
Progress's Avatar
 
Join Date: Oct 2003
Location: Buffalo, NY
Posts: 3,294
Originally Posted by pmohr
The immobilizer will only prevent it from starting, not from cranking.
Yes, you're right. I actually just went back and read my old thread where I talked about my car not starting. It turned but wouldn't fire.

My bad. Starter?
Progress is offline  
Old 03-22-2009, 08:37 AM
  #6  
Senior Member
iTrader: (4)
 
Professor's Avatar
 
Join Date: Jan 2007
Location: Pittsburgh, PA
Posts: 2,374
I would have to point to the starter, mine was acting up for awhile sounding like there was to much compression to crank and it would back spin, after about a year like that, i went to a fire call and when i got back in the car, dead, no click clacks cranks or tanks lol, i replaced it in the parking lot where i was parked in under 30 mins.
Professor is offline  
Old 03-22-2009, 09:27 AM
  #7  
Senior Member
iTrader: (1)
 
denny_1986's Avatar
 
Join Date: Jan 2009
Location: New York
Posts: 376
i would have checked all my fuses first before getting it towed. Usually the starter shows signs of crapping out before it actually craps out...
denny_1986 is offline  
Old 03-22-2009, 02:24 PM
  #8  
Member
Thread Starter
 
@NgRyM@XiM@'s Avatar
 
Join Date: Jul 2002
Location: DMV
Posts: 292
Sorry I should have mentioned I power checked the fuses; and they were fine.

Originally Posted by denny_1986
i would have checked all my fuses first before getting it towed. Usually the starter shows signs of crapping out before it actually craps out...
@NgRyM@XiM@ is offline  
Old 03-22-2009, 02:33 PM
  #9  
Member
Thread Starter
 
@NgRyM@XiM@'s Avatar
 
Join Date: Jul 2002
Location: DMV
Posts: 292
I have an Auto/SE. Before getting it towed I tried every fuse and connection. Unfortunately, this was in the evening and I had my woman in the car so I needed to move fast.

Funny thing it actually started today but barely. Felt kind of weird (sputtering and rough idle) accelerating so I didn't move it.

Originally Posted by pmohr
4AT or 6MT?

Have you tried anything yet? Bypassing the clutch switch or trying to start the car in something other than Park? Check the connections to the starter?
@NgRyM@XiM@ is offline  
Old 03-22-2009, 02:42 PM
  #10  
Senior Member
 
maxdriver10's Avatar
 
Join Date: Mar 2008
Location: Tolland, Connecticut
Posts: 347
starter....same thing happened to me
maxdriver10 is offline  
Old 03-22-2009, 04:27 PM
  #11  
Member
Thread Starter
 
@NgRyM@XiM@'s Avatar
 
Join Date: Jul 2002
Location: DMV
Posts: 292
thank you guys for the input....much appreciated.
@NgRyM@XiM@ is offline  
Old 03-23-2009, 07:22 AM
  #12  
Senior Member
 
MichMaxFan's Avatar
 
Join Date: Oct 2006
Posts: 604
Pardon my lack of knowledge,...

...but it appears that a starter can prevent the car from running well even if it has started??? I was not aware of that.

He just posted that it started and ran crappy....starting issues I was aware of, but it also affects it once running?

Enlighten me
MichMaxFan is offline  
Old 03-23-2009, 03:37 PM
  #13  
Member
Thread Starter
 
@NgRyM@XiM@'s Avatar
 
Join Date: Jul 2002
Location: DMV
Posts: 292
Just got back from being bent over (at the mechanic)...and it was the starter. In addition to getting my Tokico Illuminas installed; I got a new starter which solved my issues. She starts up nice and fast.

thanks boys!
@NgRyM@XiM@ is offline  
Old 03-23-2009, 04:56 PM
  #14  
No more Maximas...
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by MichMaxFan
Pardon my lack of knowledge,...

...but it appears that a starter can prevent the car from running well even if it has started??? I was not aware of that.

He just posted that it started and ran crappy....starting issues I was aware of, but it also affects it once running?

Enlighten me
Unless the starter is sticking out and interfering with the flywheel/flexplate, it has nothing to do with how the engine runs after it's been started.
pmohr is offline  




All times are GMT -7. The time now is 01:17 AM.