Jmaxx, did you install already? And if you did how is the RIDE? Im itching to by these right now.:confused::confused:

I found this site.

http://www.staggshocks.biz/

Nissan isn't even listed in the application guide lol

Stagg Website
 

Came over from Bimmer Forums to shoot you fellas the website lol
Looks like unkle Joe Beat me too it.

Stagg Web Site:

http://www.staggshocks.biz/


Thanks,

Hitchhikker

http://forums.bimmerforums.com/forum/member.php?u=83579

I'm interested in getting info on these too...

Whoever the company is, they must be fairly new. The applications page says "Coming soon" in big letters on the top right. It's gray, though, so it sort of blends in.

I've been lurking. Sorry to chime in randomly. :D

If these struts go over well in both short and long-run reliability, I may be in for a set down the road.

Im buying these in about 3 weeks unless i hear of something not so good about them ....i would like to know however if the seller was quick to ship these?

There is a possibility that these could be decent.

I mean, it probably only costs Tokico like $10 to make one strut, but they have a large profit margin.

This company is new so they are probably trying to get past the barriers of entry of the strut market.

^^^ So in other words, anyone riding on anything more than H-Tech height drop is out.

These sound similar to the Tokico Blues. Slightly upgraded from OEM, but still pretty much just a replacement.

WOW for $160 I might just have to give it a shot. I was going to save up and get illuminas but I can get these now and still get a Y pipe at the same time. WIN WIN for me. I might get some H&R springs while I am at it. I belive that as low as I would like to go.

These are going to be way way different than the Illuminas. But I mean, if you're just looking for a small drop, then they might be alright.

H-Tech supposedly are out as well since they drop front an assumed 1.6" ;)

These are all safe lowering stances...
Eibach
MaxSpeeds
H&R
Vogtland

I just got my car about 6 week ago and the struts are shot. So I have been driveing around with no dampaning(well the front isnt to bad but the back has nothing) I figured since I was going to have to replace them why not lower the car a little. I really want the illuminas but being the fact work is soooooooo slow right now it would take a while before I could get them and springs. These I could get in a few weeks. Decision????

I guesss what I am trying to say any dampaning right now would be a huge improvement over what I am driveing now. I would really like the illuminas but if these are OK and will last them what the heck

I would just like my car to handle nice and ride nice. From what I have read on here the h&r springs are really nice and lower the car 1.4 front and 1.3 rear but the reviws I have read have been with illumina struts?????

Psh. Not slammed = no street cred. :o

gents--I'll be the guinea pig here and give you a full review. My 2003 has 140K and it was time to change out the struts. I decided to give the Staggs a shot since they are relatively inexpensive. Long story short-- they DO NOT FIT the 2002-2003 Maxima's. They may for the 2000/2001. But the reason they don't fit is is the ABS wire that goes diagonal in the stock TOKICO's but in the STAGG the clip space for it is NOT correct which pushes the ABS line downward and stretches it. Only workaround is to use a zip tie...but I am being cautious here with the zip ties since the groove isn't right. I have not yet test it yet...but will have more info tomorrow after I take it for a test drive.

I ordered a set of Stagg struts on Friday along with some Progress springs so Ill post a review and maybe some pics when i get them. Also, my brother is a mechanic at Mossy Nissan here in San Diego so ill have him take a look at them and give me some feed back. :thumbsup:

Thank you! Now we can see how they really stand up. If it turns out well, I might be going with the same setup

i decided against these..a fellow orger has monroe sensatrac ....anyone know if these are ok to use on a drop???

i heard monroe sucked.... thats all i rmemeber

I test drove on the stagg struts yesterday after complete install and I want to bring this to the attention of those who have the 02/03 maxima's-- the ABS brackets DO NOT fit but may fit the 00/01...I do know the OEM parts for the front struts are the same for 00/01 versus the 02/03. they ride okay-- similar to stock but after 140K...forgot what stock feels like anymore. But I recommend you go with the KYB's 346366/367 (part numbers) if you want to go to stock...the brackets are a direct fit.

im looking for shocks that are affordable that can still handle a drop...im looking at maxspped springs now ....do you think monroes can handle the drop without blowing out?

From my research, Monroes probably aren't the best choice for a lowered car. I'm not sure what their warranty says for the maximum drop (if any) from stock before the warranty is void. Even from companies like KYB and Tokico, the most drop they will cover under warranty is 1.5".

I found a guy selling a full suspension setup, all parts still in the box, for the 5th gen on eBay last night. Illumnias, H&R Sport, rear sway, and a Custommaxima.com STB as a buy-it-now for $500 shipped. Sealed the deal this morning. :woot:

VERY NICE FIND!!!!!

so what shock strut deal under 350 would be good for a drop?

i just bought a set on ebay, ill post the end results

I'm anxious to get feedback about performance on these. However, such a low price feels cheap to me.

Okay, it's likely been asked over and over, and I'm sure it's a personal preference, but here goes...

To get stock ride, what is best "value buy". Given the vehicle is 2002 from Houston with 120k+ miles, I expect to get maybe about another 100k/5 years.

I'm considering just buying the stock setup from courtesyparts.com

Thanks,

Adam

i just ordered some maxspeed springs ill post how the ride is with these struts

good deal bro....im getting some maxspeeds soon and was wondering the ride quality with theses myself..

Ok, so I received the Stagg's on Tuesday and had my bro who works for nissan inspect them. This wont help much since i haven't installed them but he and the other mechanics at Nissan say they seem like good quality parts and couldn't believe how much I got them for :). I should have them installed by this time next week along with the progress springs so ill let you guys know how they ride with a more agressive drop. Ill also put some pics up in my album when im all done.

nice, do u guys think il have a rubbing issue with the maxspeed springs if im running 245/45/18 in the rear??

Good stuff, cant wait to see how they handle with the progress. I might be looking to do the same thing, so you got my attention

Damn everyone is pickin these up huh? LOL i guess at such a cheap price how can you go wrong....im buying mine not th is coming week but the week after and probably dropping em on maxspeeds unless i find another set of springs fairly cheap...

Came across these:

http://cgi.ebay.com/ebaymotors/4-New...Q5fAccessories

They are for the 4th gen, but in the listing is talks about High quality NOK seals. Sound familiar?

Actually got around to installing my suspension today, all went smooth besides that earthquake while my car was on jack stands :nervous:. The staggs are a perfect fit and the ride is great so far :D. All pics are in my album and ill upload a pic with my new ride height sometime tomorrow.

sounds good! cant wait!

ow is the ride holding against decent sized potholes ? does the steering wheel shake does it float ? recover fast as stock or better? or worst ?

sorry i dont mean to ask u all thisstuff like ur some sort of benchmark expert i just wannt know because i may be interested in picking these up soon aswell.

So youre running on oem springs....now that we got an oem ride height we need someone with springs to drop it on these and see how it turns out

Actually, I have Progress springs now with the Stagg SHS struts. It was late yesterday and its been raining today so I haven't had a chance to take a pic of the new ride height.

Im definetly no expert but im really happy with the results. I haven't gone over any potholes yet but it has handled great over other small irregularities in the road. I've only driven about 50 miles so far so its gonna be a couple weeks before I can give a good review on these.

so they handle good with lowering springs youre sayin??

Yes, that is what im saying
Stagg SHS struts + Progress Technology springs= Good ride