Cattman Headers production Run December 2013
Just talked to cattman yesterday and he has a list for headers going. So give him a call to get on the list.
|
Do you know how many are on the list?
|
No
|
I need to get a set of these headers! wonder how much they're going for; definitely going to get them in the near future....first things first, gotta get these motor mounts out of the way
|
You can still get on the list. Don't have to pay up front.
|
Originally Posted by Chris Gregg
(Post 8890994)
You can still get on the list. Don't have to pay up front.
|
Don't pay anything until the minimal orders are met. THEN you pay deposit to start production and pay remainder when done- before shipping.
|
Still happy with the early fall headers I got from him
|
I think he said early spring. Can't remember.
|
Is there a thread with a sign up list? Also would anyone know if these are for the 3.0 or 3.5? Im looking to get a set of headers and Y for my 4th gen and im aware theres some slight differences between the two.
If hes going to have some 3.0 headers im in it to win it! |
Originally Posted by Slamrod
(Post 8891655)
Is there a thread with a sign up list? Also would anyone know if these are for the 3.0 or 3.5? Im looking to get a set of headers and Y for my 4th gen and im aware theres some slight differences between the two.
If hes going to have some 3.0 headers im in it to win it! |
$350 for a Y-pipe ..., nice! If I go in, I already have the B-pipe. Will I need a new CAT to make the conversion flow better? His site says the RT cat is NOT available ...? One of my Pre-CATS purrs at about 1800 rpm (annoying) ... Hope to install does not drive me Mad with any rusted bolts ...!
|
Originally Posted by maurice240sx
(Post 8892910)
I think 95-03 are the same just different y pipes but call him.
|
Originally Posted by optimus1
(Post 8893407)
$350 for a Y-pipe ..., nice! If I go in, I already have the B-pipe. Will I need a new CAT to make the conversion flow better? His site says the RT cat is NOT available ...? One of my Pre-CATS purrs at about 1800 rpm (annoying) ... Hope to install does not drive me Mad with any rusted bolts ...!
If your willing to pay 350 for y-pipe then you should save up a little more money and get the entire headers and y-pipe combo. Trust me. Ive have a y-pipe, shorty headers with a y-pipe. Then two sets of cattman header and y-pipe combos. It is a hands down no comparison difference. |
Originally Posted by IslandMax
(Post 8893453)
If your willing to pay 350 for y-pipe then you should save up a little more money and get the entire headers and y-pipe combo. Trust me. Ive have a y-pipe, shorty headers with a y-pipe. Then two sets of cattman header and y-pipe combos. It is a hands down no comparison difference.
|
^what year is your max?
|
I bought headers and y-pipe from Brian recently. ~$900 range for parts
|
How are you guys getting in contact with Brian? I've left several voice mails and an email and haven't heard back anything.
|
Originally Posted by ablackformula
(Post 8894534)
How are you guys getting in contact with Brian? I've left several voice mails and an email and haven't heard back anything.
|
Y pipes:
95-98 are all fed spec. Some 99-01 are fed spec. Some 99-01 are Cali spec. 02-03 is different again. Fed spec has both pre cats in the y pipe. Replacing y pipe eliminates both pre cats. Cali spec y pipe has 1 pre cat. Only one (of the two) is deleted with a y pipe replacement. 02-03 y pipe has no pre cats in it. Headers replace the y pipe in all cases, and thus, replace all the pre cats no matter what. 95-03 headers are all the same (except 02 bung and EGR Ports. |
Bump
|
Originally Posted by maurice240sx
(Post 8911364)
Bump
|
He hasn't called me to get the first payment. So I guess he is still waiting for orders. Bump so people can see it
|
Just talk to cattman
Just talked cattman about a hour ago he is answering his phone now and taking orders for headers and 3" catbacks
|
Originally Posted by maurice240sx
(Post 8929732)
Just talked cattman about a hour ago he is answering his phone now and taking orders for headers and 3" catbacks
|
count me in for my 3.0
Originally Posted by maurice240sx
(Post 8929732)
Just talked cattman about a hour ago he is answering his phone now and taking orders for headers and 3" catbacks
|
YES! I'll be calling tomorrow.
|
Bump
|
Bump
|
I'm glad too see Cattman is still there.....He had me worried there for about a month or so....
|
Bump
|
Not to try & undercut Brian's business. I posted this here to avoid the hassle from bargain hunters that don't realize the value of Cattman's.
Since I no longer own my 2001 Maxima. I have a set of (gen 2 w/EGR) headers/y-pipe/fastcat/gaskets & etc. (i.e. R-O2 sensor extension cables). BNIB sitting in my garage, coated w/ VHT flame proof 2Kdeg.F aluminum/ceramic header paint. Serious inquiries ONLY please, via. PM. http://forums.maxima.org/picture.php...ictureid=38819 |
Subscribed!!!
|
Originally Posted by CMax03
(Post 8931299)
I'm glad too see Cattman is still there.....He had me worried there for about a month or so....
|
Originally Posted by BobPezz
(Post 8931530)
Not to try & undercut Brian's business. I posted this here to avoid the hassle from bargain hunters that don't realize the value of Cattman's.
Since I no longer own my 2001 Maxima. I have a set of (gen 2 w/EGR) headers/y-pipe/fastcat/gaskets & etc. (i.e. R-O2 sensor extension cables). BNIB sitting in my garage, coated w/ VHT flame proof 2Kdeg.F aluminum/ceramic header paint. Serious inquiries ONLY please, via. PM. http://forums.maxima.org/picture.php...ictureid=38819 |
Yea I would say he still own it because I spoke to him myself.
|
Bump
|
Why the unnecessary bumps?
|
Just making sure it gets around. I want my headers and 3" exhuast.
|
Looking to buy these headers...I'll be calling Brian tomorrow, I hope these are still in production!
|
All times are GMT -7. The time now is 02:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands