what's the part number?
 

Part number for camshaft position sensor on a 2002 maxima?

Right bank - Valve Assy-Solenoid, Valve Timing Control = 23796-EA20A
Left bank - Valve Assy-Solenoid, Valve Timing Control = 23796-EA20B

msrp $215, on-line $160

Bank 1, I'm assuming left side (steering wheel).

I heard our cars only have one.

http://www.courtesyparts.com/23731m-...-p-193702.html

It's cheaper from here....

Courtesyparts is OEM nissan parts right?

My car doesn't use two, only 1.

Dennis is correct, the you have 2 sensors, one for each bank. It states one part for each vehicle because the L and R are different sensors and are not interchangeable.

Both Scott and I are wrong in different ways. I gave the part numbers for the wrong parts.

left sensor - Camshaft Position Sensor - 23731-AL61A
right sensor - Camshaft Position Sensor - 23731-6J90B

Both are $77.42 @ nissanpartszone.com

http://www.nissanpartszone.com/Page_...mponentsNo=221

Camshaft position sensor
 

There are two camshaft position sensor

Both in the driver side.
Camshaft position sensor (bank 2) Near the radiator (sensor with angle female connector)

Camshaft position sensor (bank 1) Near the firewall (sensor with straight female connector)

To remove the connector, press down the green tab then pull the connector.

****...

I think I bought bank 2, that's why the car isn't fixed.

****...****...****


I bought the one right by the air intake duct, seems to me like bank 2.

Is there anyway I can just replace the tab?

ugh... Can I take back the orginal nissan one I bought for bank 2?

What part number
 

Try to check the error code
P0011: Camshaft Position Adavanced Timing Bank 1
P0021: Camshaft Position Advanced Timing Bank 2
See this link page:167

http://www.nicoclub.com/FSM/Maxima/2002/EC.pdf

ordered the female connector for the firewall....