Maxima Forums - Won't Idle- stalls after IVAC and ECU repair

Maxima Forums (https://maxima.org/forums/)

- 5th Generation Maxima (2000-2003) (https://maxima.org/forums/5th-generation-maxima-2000-2003-7/)

- - Won't Idle- stalls after IVAC and ECU repair (https://maxima.org/forums/5th-generation-maxima-2000-2003/681958-wont-idle-stalls-after-ivac-ecu-repair.html)

Won't Idle- stalls after IVAC and ECU repair

2001 AE Manual Transmission-

Car started and idled fine the first time... even dropped idle a bit when warmed up. Much rejoicing.

Next startup and always now, it will stall- won't idle at all. Much despair.

1. Do I have to do the idle idle relearn after IVAC and ECU replacement? (also cleaned throttle body)
2. Can I just unplug battery for a few days which I understand is the ECU reset?
3. What else MUST be done after this procedure?

note: I think the idle relearn procedure depends on the car being able to idle right?

check your fuel pump and injector fuses under the dash.

pull the MAF and clean It with the proper MAF cleaner from CRC

I would get it started and apply the accelerator just enough to keep it running till it's up to temp.... see if it holds then.