Picked this HID xenon kit up
#1
Father of the 00 VI
Thread Starter
iTrader: (15)
Join Date: Nov 2000
Location: amsterdam ,new york
Posts: 3,330
Picked this HID xenon kit up
I want to make this work on my 01 . don't know if it works .missing a bulb. i think i have everything else.
Is this stock and any advice. I may just sell it not sure.
Is this stock and any advice. I may just sell it not sure.
Last edited by krismax; 12-13-2018 at 08:38 PM.
#9
#10
Father of the 00 VI
Thread Starter
iTrader: (15)
Join Date: Nov 2000
Location: amsterdam ,new york
Posts: 3,330
Is the ballast set up for only low beam? To get BI-xenon I have to get new ballasts?
Last edited by krismax; 12-23-2018 at 06:13 AM.
#14
Ballasts are low beam only period. What can be bixenon are aftermarket bulb types (H4, 9004/9007) or the projectors themselves (which utilize a solenoid that flips the cutoff shield in the projector down to allow more light through the projector).
#16
Father of the 00 VI
Thread Starter
iTrader: (15)
Join Date: Nov 2000
Location: amsterdam ,new york
Posts: 3,330
Those are just glare shields...
Ballasts are low beam only period. What can be bixenon are aftermarket bulb types (H4, 9004/9007) or the projectors themselves (which utilize a solenoid that flips the cutoff shield in the projector down to allow more light through the projector).
What cars have a good projector? Got the Camry ones for free. Because i can get anything.
Would it be easier to use these?My headlight assembly is a stock one now fits pretty good.
https://www.ebay.com/itm/Glossy-Blac...Wan:rk:15:pf:0
Last edited by krismax; 12-24-2018 at 08:58 AM.
#19
the only catch is if you go in keeping the bulbs and ballasts, you have to do a custom one off retro fit, and considering the camary ones you have arent all that worth it, your stuck with getting different ones. if you can get different ones for free like you did with the camary ones then maybe its worth it, to me either keep it simple and get nice halogen bulbs that are clear white 3000k/4000k (Sylvania Silverstar Ultra, or PIAA ) and put them in what you already have stock, and sell off the ballasts that you have. or if you want to make this a project then go for the retro fit !
its definately rewarding once done !
also you can get crap EBAY housings that have a projector in them but they are straight rice garbage.
its definately rewarding once done !
also you can get crap EBAY housings that have a projector in them but they are straight rice garbage.
#20
If you can find them for cheap, I recommend the Phillips crystal vision bulbs. I have them in my 01 forester, and they put out more light than a standard bromine filled halogen bulb. If I were you, I would retrofit an H3 HID bulb kit into the foglight housings instead.
#21
Father of the 00 VI
Thread Starter
iTrader: (15)
Join Date: Nov 2000
Location: amsterdam ,new york
Posts: 3,330
Just to see how the 02-03 maxima ,Phillips after-market HID look in the Camry projector.I think there 6K?
The bulb plugs in almost. I could make it work but if i have to fit something might as well get Nissan projectors.
This is using only one headlight for all pictures. Car is in the garage, sorry accord is in the way. Didn't want to move it.
The bulb plugs in almost. I could make it work but if i have to fit something might as well get Nissan projectors.
This is using only one headlight for all pictures. Car is in the garage, sorry accord is in the way. Didn't want to move it.
Thread
Thread Starter
Forum
Replies
Last Post
Grey00lustre
5th Generation Maxima (2000-2003)
13
12-22-2004 08:54 AM
Grey00lustre
5th Generation Maxima (2000-2003)
5
10-23-2004 02:00 PM