Polishing aluminum hood and trunk
When I took my hood off and replaced it with the carbon fiber unit, I noticed the unpainted surface where the hood attached to the hinge, and it was a nice aluminum surface. There is a Bugatti Veyron called a Pur Sang edition in which the paint of the car is removed and the surface is polished revealing the carbon fiber and aluminum and it is one of the most beautiful cars Ive ever seen. They charge about $2 million for it.
This leads me to wonder what the Maxima would look like if the paint from the aluminum trunk and hood was removed and the parts were polished and clear coated. How involved would that be? Would it look good? If so, on what colored car would it look the best? How much lighter would the car be? (just kidding) Is this something anyone would consider? Am I losing my mind? lol Please share your opinions, and photochoppers, please feelfree to photochop this. |
Kind of like this? This is a 2008 Mugen Type RR Experimental Spec...I think it is very different and unique. And it would look best on Black or Red. ;)
http://i254.photobucket.com/albums/h...tal_Sp_001.jpg http://i254.photobucket.com/albums/h...rimental-s.jpg http://i254.photobucket.com/albums/h...tal_Sp_002.jpg |
Yes something like that.
|
why mark?
|
Looks kinda cool, like this:
http://i3.photobucket.com/albums/y97...ma/pursang.jpg |
i have always wondered about this, i think it looks pretty tight now that i see it though...
|
|
Maintaining it would be a PITA
|
Originally Posted by !PrjctMax!
(Post 6654478)
Maintaining it would be a PITA
|
it'd be a lot of time and work.
and you'd have to be pretty careful when polishing it cause the hood would warp reaaaaaly easily |
I think I might try it.
|
Yeah that would be one of a kind huh!?
Who is gonna be the first to do it now is the question? lol How much would that run for anyways? Estimate of some sort?? |
Originally Posted by GrimMax
(Post 6655427)
Yeah that would be one of a kind huh!?
Who is gonna be the first to do it now is the question? lol How much would that run for anyways? Estimate of some sort?? |
At that price, it's better than the CF hood. lol :) CF is a little played out now IMO.
|
You are losing your mind. That looks horrible.
IMO of course. |
Yeah but you have a kayak on your roof....lol just kiddng!
|
No that's a new roof WING!
|
Originally Posted by jsmithsole
(Post 6656101)
Yeah but you have a kayak on your roof....lol just kiddng!
|
the unsinkable maxima!
|
Originally Posted by DeusExMaxima
(Post 6655522)
It depends on if you do it urself. U need to remove the paint without damaging the metal. Then the entire hood has to be polished and then sprayed with clear coat. Im guessing $500-750??
It would look hot on a pure black Max. (hint hint Mark.. LOL!!) |
Hood scoop on aluminum hood.
Are there any hood scoops for the aluminum hood for the maxima? I would like to design some new ones, either developed for the aluminum, or a carbon fibre design. Any contacts at manufacturers you would suggest?
|
Originally Posted by sirphilo
(Post 7432354)
Are there any hood scoops for the aluminum hood for the maxima? I would like to design some new ones, either developed for the aluminum, or a carbon fibre design. Any contacts at manufacturers you would suggest?
;) |
This is a look for show not go
|
Originally Posted by KCmaxx
(Post 7432366)
I would suggest using the search function over reviving two year old threads.
;) |
Sorry... I will remember to use the search better in the future.
Sorry, I will use the search function better in the future, and watch the age.
I was just really excited, due to thinking about this concept since the new Max came out, and my car looks bland. I should have said, "I want to design an updated body kit to keep the 6th Gen modern. Part of the body kit would be a new inexpensive hood scoop design." This could be tied into a Cold Air Intake or possibly a shaker hood design with outside guages in the hood scoop facing the drivers line of site. I agree a higher end model for show would have a feathering / blending issue bonding to the hood. Super show quality designs may need either tiger hair Bondo, or aluminum (lead type) filler. If a great demand warrants manufacturing. The complete hood could be stamped as one unit. (See "www.keystonerestyling.com" |
Originally Posted by sirphilo
(Post 7432485)
Sorry, I will use the search function better in the future, and watch the age.
I was just really excited, due to thinking about this concept since the new Max came out, and my car looks bland. I should have said, "I want to design an updated body kit to keep the 6th Gen modern. Part of the body kit would be a new inexpensive hood scoop design." This could be tied into a Cold Air Intake or possibly a shaker hood design with outside guages in the hood scoop facing the drivers line of site. I agree a higher end model for show would have a feathering / blending issue bonding to the hood. Super show quality designs may need either tiger hair Bondo, or aluminum (lead type) filler. If a great demand warrants manufacturing. The complete hood could be stamped as one unit. (See "www.keystonerestyling.com" Look around. Alot of what you just listed has already been done. |
All times are GMT -7. The time now is 06:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands