Hot weather ... + Tuning
Hi guys,
I'm thinking of putting some extra hours power on my 04 SL but the problem is the weather. It hot already and the tempreture goes to 50 + C in the afternoon !!! :eek::eek: What do you advice me to do ... Regards |
Um, what..?
|
I would like to tune up my max but I'm afraid that the weather will be a problem.
What advice do you recommend me? Should I tune my max? need your help |
What problem does the weather present?
|
When you mean "tune" you mean modding peformance parts on your car I assume ?
In the states when you say "tune" were thinking Dyno so your getting 50C thats about 122 Degrees F ? I would say Cold Air Intake , you will still be pulling colder air in from the outside than inside your engine bay. Cat-back exhuast NWP Spacers |
I think he means hes using some sort of UTEC to tune his car but is having air/fuel issues since its so hot out where he lives?? That was my interpretation of what he said anyway.
|
work on your car indoor
|
Before I awnser your question, Answer mine. Where the hell on earth is it 122 Deg F?????
|
Hi guys
I need to modify my car to make it stronger and what i think is if the weather is hot this will be a problem for the car!!! lets see: NiZMo1o1 For the air intake I will try Fujita as most of the members are using it for the spacers I have read some articles and I think it will be fine to install it and I need to buy a new UIM gasket 04MAX_ILLIN Its to modify my maxima and I need some recommendation I VIK I Its only May we still have JUNE - JULY - AUGUST !!!! I will capture a picture for the tempreture !!! today it was 48 C "United Arab Emirates" |
your in UAE i was born in Abu Dhabi, man that place does get burning hot. i remember back in the day they used to tell people on the radio stay inside cuz its too hot. GL with the Modding
Originally Posted by K10
(Post 7046760)
Hi guys
I need to modify my car to make it stronger and what i think is if the weather is hot this will be a problem for the car!!! lets see: NiZMo1o1 For the air intake I will try Fujita as most of the members are using it for the spacers I have read some articles and I think it will be fine to install it and I need to buy a new UIM gasket 04MAX_ILLIN Its to modify my maxima and I need some recommendation I VIK I Its only May we still have JUNE - JULY - AUGUST !!!! I will capture a picture for the tempreture !!! today it was 48 C "United Arab Emirates" |
:mrgone:
|
Originally Posted by K10
(Post 7046760)
Hi guys
I need to modify my car to make it stronger and what i think is if the weather is hot this will be a problem for the car!!! lets see: NiZMo1o1 For the air intake I will try Fujita as most of the members are using it for the spacers I have read some articles and I think it will be fine to install it and I need to buy a new UIM gasket 04MAX_ILLIN Its to modify my maxima and I need some recommendation I VIK I Its only May we still have JUNE - JULY - AUGUST !!!! I will capture a picture for the tempreture !!! today it was 48 C "United Arab Emirates" you will need pleanty of silicon and your good |
Put some ice cubes in the gas tank :D
|
Originally Posted by soccerplr19
(Post 7046795)
your in UAE i was born in Abu Dhabi, man that place does get burning hot. i remember back in the day they used to tell people on the radio stay inside cuz its too hot. GL with the Modding
I was born in Al Ain town. thanks |
Originally Posted by NiZMo1o1
(Post 7046945)
You will NOT need a new UIM gasket cause the one NWP supplies eliminate it.
you will need pleanty of silicon and your good I have checked their web they have these staff for my Maxima: - VIAS Block Plate Kit - FWD VQ35DE - VQ35DE FWD Phenolic Intake Spacer Kit - FULL - VIAS Block Plate Kit - BASIC - FWD VQ35DE Will I get better performance if I bought the three items? regardless the price |
Originally Posted by I VIK I
(Post 7046554)
Before I awnser your question, Answer mine. Where the hell on earth is it 122 Deg F?????
|
Originally Posted by K10
(Post 7047971)
regardless the price
|
so who can prove to me the air (for "cold" air intake) by the tire being pulled in from where exactly is any cooler than the high pressured air smacking in between the hood and grille that is forced into the intake?
|
Originally Posted by K10
(Post 7047971)
I have checked their web they have these staff for my Maxima:
- VIAS Block Plate Kit - FWD VQ35DE - VQ35DE FWD Phenolic Intake Spacer Kit - FULL - VIAS Block Plate Kit - BASIC - FWD VQ35DE Will I get better performance if I bought the three items? regardless the price |
Mr K10... get ahold of me bro, we have to talk lol.
|
Originally Posted by NismoMax80
(Post 7049179)
so who can prove to me the air (for "cold" air intake) by the tire being pulled in from where exactly is any cooler than the high pressured air smacking in between the hood and grille that is forced into the intake?
|
It's like living in AZ... Your body gets use to it and the cars around there are made to withstand the heat. You'll be surprised how how it gets, especially if you're not use to it.
|
All times are GMT -7. The time now is 02:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands