07-08 6.5 Gen Blue Batmobile's Yellow Fogs Overlay
 

07-08 Blue Batmobile Yellow Fogs Ovelay

http://i854.photobucket.com/albums/a...05133824-1.jpg

http://i854.photobucket.com/albums/a...9-05133405.jpg

Thanks Andy............

Nice. :)

props

Lol! Nice. I want some batman fog lights how do I go above getting them?

It's clean

Where can you buy those yellow fog lights from???

You need to contact Andy at bluebatmobile2005@yahoo.com , he dont have this on the website yet.....

Also you can see some of his overlays at bluebatmobile.net

Thank you guys, in person they look waaaaaay nicer.....

How do you know this guy if you don't mind me asking?

Bluebatmobile has been doing overlays for the 6thgen forum community for a while now. He's pretty known to people that's been on here for a little while.

looks great!! just watch how long u leave fogs running when cars not moving housing gets real hot I went thru 3 diff sets from diff companies
I ended up painting mine with yellow stain glass paint and no issues

+1.......

Thanks bro, I turn on the fog lights a lot, no issues yet, but I will consider that if I have any issues, thanks for the advise bro....

Thats just a film over the fog, right??

Yes siiiir, is just a film over the fog......

They are cheaper on eBay then what that guy sells them for.

screw ebay copy cats, I support Bluebat

Ok, you do that but they look fine to me.

http://www.ebay.com/sch/i.html?_from...All-Categories

+1..........why go cheap?

So this guy sales yellow film to put over our Foglights? How do you put it on the fog lights?

Because it's the same thing. Besides, it's low to the ground and in front. You will need to replace it a few times.

First of all you need to drop the bumper, there are two clips and a screw holding the fog light, you will need a heat gun or blow dryer, squeegee and water with soap, clean the lense real good, spray the water/soap over the vinyl and lense and use the heat gun or blow dryer(be veeery careful when you do that) use the the squeegee to get rid of the water and soap bubbles.....

in some cases generic laminate film is similar, but he offers direct one of a kind cut out templates for the exact application that you need.

you get what you pay for, and if you think u need to replace it that often then yeah i guess your better off getting cheapbay

I don't think it will need to be replaced often, I know. It's a low spot on the front of the car, if the plastic lens of the fog light gets all kinds of nicks, imagine what will happen to the film in a short time. So yeah, if you want it always looking sharp, you'll need to replace it once in a while. It's just a film that makes the color yellow or amber or whatever. What difference does it make if it's cheap or expensive? Same thing will happen to both but the logic here is to save some cash.

I would rather buy yellow H11 bulbs and not worry about replacing the film when it fades or other kinds of weathering.

I totally agree!!

That sounds better buying the bulbs. Where can I buy those at! Autozone?

Nope, eBay.

Are these hard to install? And do I all need are the bulbs?

Yes, a pair of H11

Is not hard to install, requires a par of H11 bulbs

Ok thanks, I can only buy then from eBay? One more qeustion.. Are they illegal ? Someone told me that they were

Your welcome bro, well I got them from bluebatmobil.net, send an email to Andy at bluebatmobile2005@yahoo.com , dont know if they are illegal or not.....