Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   6th Generation Maxima (2004-2008) (https://maxima.org/forums/6th-generation-maxima-2004-2008-48/)
-   -   FSTB (https://maxima.org/forums/6th-generation-maxima-2004-2008/641334-fstb.html)

Kryogen 10-29-2011 07:21 PM

FSTB
 
what are the available FSTB nowadays?
where do you get em from?
worth it?
which one do you recommend?

ChrisMan287 10-29-2011 07:30 PM

Get the cheapest one you can find.

03VQMAX 10-29-2011 07:38 PM

1. Ebay, Stillen.com, Racingline.com.
2. Same as #1.
3. Yes.
4. Racingline.

BadBlackMaxSL 10-30-2011 08:37 AM

Racing Line. And it is worth it, the Max should have come with one from the factory. I got the black one.

mrkhone 10-30-2011 04:45 PM

Racingline. Worth it. Car doesn't sway like an old caddy in turns

Kryogen 10-30-2011 07:11 PM

Any of you got the RSB from kcmaxx ?

Did it improve handling as much as the FSB, or it's not really noticeable? What are your feelings about it?

I feel like my car is a big boat and I want to make it more rigid in curves. I feel like the car is bending and twisting in curves.

Kryogen 10-30-2011 07:22 PM

Just ordered racingline FSTB. 115$ tax in, thats a good price, plus they're canadian, no crappy duties or excessive shipping :D

RAZ76 10-30-2011 09:36 PM


Originally Posted by Kryogen (Post 8253586)
Any of you got the RSB from kcmaxx ?

Did it improve handling as much as the FSB, or it's not really noticeable? What are your feelings about it?

My advice, get the Progress rear sway bar and that will improve the handling a lot more then the RSB.

Kryogen 10-31-2011 06:15 AM

How big is the difference with progress rsb? Comments from people who have installed it?

So for general better handling, racingline FSTB and progress RSB?

Why dont they make a bigger FSB? Too much of a job to remove and reinstall it because of the subframe, or just because the FSB is large enough already?

BadBlackMaxSL 10-31-2011 06:48 AM


Originally Posted by Kryogen (Post 8253800)

Why dont they make a bigger FSB? Too much of a job to remove and reinstall it because of the subframe, or just because the FSB is large enough already?

From what I've read is that you have to drop the subframe to get it in- so yes, too involved for most to tackle. Deus had a write-up about it a few years ago.

Kryogen 10-31-2011 02:53 PM

Ya it wont come out unless you drop the subfame, and guess what, this is a POS job ;)

RAZ76 10-31-2011 03:10 PM


Originally Posted by Kryogen (Post 8253800)
How big is the difference with progress rsb? Comments from people who have installed it?

So for general better handling, racingline FSTB and progress RSB?

Why dont they make a bigger FSB? Too much of a job to remove and reinstall it because of the subframe, or just because the FSB is large enough already?

Progress has the rear sway bar, not strut bar. I have it and it works like a charm along with Moog end links. The rear deck already acts as a strut bar since it conects left and right of teh car by the speaker deck so why spend money on a strut bar, not needed. Get the rear sway bar and you will like it.

RAZ76 10-31-2011 03:12 PM


Originally Posted by Kryogen (Post 8254196)
Ya it wont come out unless you drop the subfame, and guess what, this is a POS job ;)

It's not too hard to drop the sub frame but its time consuming. For the front you have the option of using Altima SEr sway bar or Nismo( more expensive).

MiamiBlackMax 10-31-2011 07:04 PM

:mrgone:


All times are GMT -7. The time now is 06:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands