Maxima Forums

6th Generation Maxima (2004-2008) Discussion of the 6th generation Maxima. Come see what others are saying.

2005 Max cranks but won't start

Thread Tools
 
Search this Thread
 
Old 07-20-2017, 01:30 PM
  #1  
Newbie - Just Registered
Thread Starter
 
Eljuane803's Avatar
 
Join Date: Feb 2016
Location: SC
Posts: 5
2005 Max cranks but won't start
2005 Max will crank but won't start
I have 2005 Max, 270,00 miles and AutoTransmission.

I replaced the flex plate, 2 Cam Sensor, Crankshaft Sensor, spark plugs, coil packs,valve cover gasket, battery, and alternator. I changed all them and still my car won't crank. I don't know what could be the problem to cause my car not too crank. Need HELP!!!!! Can anyone give me some sound advice.
Eljuane803 is offline  
Reply
Old 07-20-2017, 02:22 PM
  #2  
Member
 
follyburr's Avatar
 
Join Date: May 2015
Posts: 139
Not sure what it could be, but have you checked/replaced the starter? even the cables/wires.
Last edited by follyburr; 07-20-2017 at 02:27 PM.
follyburr is offline  
Reply
Old 07-20-2017, 03:21 PM
  #3  
Newbie - Just Registered
Thread Starter
 
Eljuane803's Avatar
 
Join Date: Feb 2016
Location: SC
Posts: 5
Originally Posted by follyburr
Not sure what it could be, but have you checked/replaced the starter? even the cables/wires.
yes, check the starter. The starter okay. Going to check all wires now and put code reader on the car
Eljuane803 is offline  
Reply
Old 07-21-2017, 10:05 AM
  #4  
Senior Member
 
MadMax07SL's Avatar
 
Join Date: Apr 2009
Posts: 2,132
If I'm reading it correctly, you meant to say 270,000 miles? With that kind of usage, hell it could even be the compression in multiple cylinders is so low you can't get a good explosion! Damn, I hope you get it narrowed down!
MadMax07SL is offline  
Reply
Old 07-23-2017, 07:11 AM
  #5  
Newbie - Just Registered
Thread Starter
 
Eljuane803's Avatar
 
Join Date: Feb 2016
Location: SC
Posts: 5
The code reader is saying that I have bad crank sensor and cam sensor. I just change all three sensor before I change the flywheel. Do you think it could be timimg is off???
Eljuane803 is offline  
Reply
Old 07-25-2017, 10:32 AM
  #6  
Senior Member
 
Costee's Avatar
 
Join Date: Sep 2010
Location: Lagos, Nigeria
Posts: 862
Originally Posted by Eljuane803
The code reader is saying that I have bad crank sensor and cam sensor. I just change all three sensor before I change the flywheel. Do you think it could be timimg is off???
A great possibility. Check the compression.
Costee is offline  
Reply
Back to Subforum
6th Generation Maxima (2004-2008)
View Next Unread
Broken Dome Light Switch Caused Fuse to Blow?




Advanced Search

All times are GMT -7. The time now is 01:55 PM.