Ball joint to steering knuckle nut size

Reply Subscribe

Thread Tools

Search this Thread

11-16-2018, 12:46 PM

Rinard Pratt

Newbie - Just Registered

Thread Starter

Join Date: Feb 2017

Posts: 8

Ball joint to steering knuckle nut size

I am replacing the steering knuckle and hub due to wheel bearings going out. Does anyone know the size of the nut holding the knuckle to the ball joint?

11-17-2018, 04:56 AM

Rinard Pratt

Newbie - Just Registered

Thread Starter

Join Date: Feb 2017

Posts: 8

Thanks. I have a 21 mm but it didn't fit. I know the 5th gen uses a 19mm. I didn't want to buy a whole new set of impact sockets and end up with two of the same ones.

11-17-2018, 06:06 PM

Rinard Pratt

Newbie - Just Registered

Thread Starter

Join Date: Feb 2017

Posts: 8

Well I decided to go ahead and buy the full cell. More cost effective than buying each single. Besides I will have the ones I don't normally use for future use.

11-17-2018, 06:35 PM

Rinard Pratt

Newbie - Just Registered

Thread Starter

Join Date: Feb 2017

Posts: 8

Yes. Especially since cost of repairs are outrageous at shops and dealerships. Can use the money saved to upgrade the max and add some luxury items.lol