Racingline Y Pipe now available again! : )
Alright guys, who's going to give this a whirl?
It's a cheap mod for good power. :D I'm just curious about how it'll change the exhaust note/drone. http://racinglineperformance.com/sho...&idcategory=22 |
Racingline has a threead on this forum title "Racingline updates". On their thread they have a video clip with the y-pipe installed on a 09' Maxima. It sound pretty hot. I ordered mine last week, now I'm patiently awaiting it's arrival.
|
Originally Posted by Tooruff
(Post 7458828)
Racingline has a threead on this forum title "Racingline updates". On their thread they have a video clip with the y-pipe installed on a 09' Maxima. It sound pretty hot. I ordered mine last week, now I'm patiently awaiting it's arrival.
|
So, did anyone receive theirs yet? Any input? I already have the stillen intake & exhaust, so I am wondering if there is a benefit from this piece. Cheers!
|
Originally Posted by Alpha
(Post 7458771)
Alright guys, who's going to give this a whirl?
It's a cheap mod for good power. :D I'm just curious about how it'll change the exhaust note/drone. http://racinglineperformance.com/sho...&idcategory=22
Originally Posted by imcgjh84
(Post 7462833)
So, did anyone receive theirs yet? Any input? I already have the stillen intake & exhaust, so I am wondering if there is a benefit from this piece. Cheers!
|
I received an e-mail from Racingline today that said my y-pipe shipped. I checked the Fedex site and it said I should receive it a week from today. If that's true I'll install the pipe next weekend.
|
Originally Posted by Tooruff
(Post 7463256)
I received an e-mail from Racingline today that said my y-pipe shipped. I checked the Fedex site and it said I should receive it a week from today. If that's true I'll install the pipe next weekend.
|
Mine isn't coming until Thursday, I'll put it on next weekend. My Stillen cat-back isn't loud enough for me, but I would assume that this Y-pipe will make it louder.
|
Originally Posted by GEAR_HEAD
(Post 7464544)
Mine isn't coming until Thursday, I'll put it on next weekend. My Stillen cat-back isn't loud enough for me, but I would assume that this Y-pipe will make it louder.
|
Mine is scheduled for delivery on Thursday. I'll install it over the weekend and try to hit the drag strip to see if my numbers improve any.
|
Any updates?
|
i ordered one last week should be at my house in a few days then gotta borrow friends floor jack put it in ....ill record some vids i have straight pipe also so it should sound pretty g00d
|
Originally Posted by IFuXwiTuZ
(Post 7469927)
i ordered one last week should be at my house in a few days then gotta borrow friends floor jack put it in ....ill record some vids i have straight pipe also so it should sound pretty g00d
|
Originally Posted by 09max07gsxr
(Post 7469992)
How are you gonna install this yourself? Doesn't it require cutting and welding the old pipes?
|
Originally Posted by GEAR_HEAD
(Post 7470008)
No, it's a bolt-on.
If I would have read, I would have seen that. <-- Idiot! :laugh: |
Order submitted. We will see. :)
|
Does this have any effect on the warranty?
|
Originally Posted by omario
(Post 7470341)
Does this have any effect on the warranty?
|
I found the website to purchase new gaskets before installing but I'm not sure which ones I need (all 3?) Here's the website http://www.courtesyparts.com/maxima-...8328_8329.html Did you guys purchase specific ones or all of them?
|
Check you local Nissan dealers parts department. Three local dealers in my area had all three gaskets in stock and you don't save anything by ordering them (shipping). The list price for the gaskets are only about a buck and a half more total.
|
Originally Posted by omario
(Post 7470341)
Does this have any effect on the warranty?
|
Originally Posted by Invizion
(Post 7470993)
I found the website to purchase new gaskets before installing but I'm not sure which ones I need (all 3?) Here's the website http://www.courtesyparts.com/maxima-...8328_8329.html Did you guys purchase specific ones or all of them?
|
Just so you all know, you are gonna need some RTV sealant too. I spoke with Racingline about the fact that the y-pipe has smooth flanges as opposed to the OEM flanges with extending "tabs" to hold and seat the gaskets. They said to just use RTV to hold the gaskets to the header/pre-cat side while you mate-up the y-pipe.
Another concern I have is that the rear-facing forward flange has a much bigger hole than the forward-facing one. The crush gasket does not fully seat against the flat part of the flange - it overhangs into the pipe. Not sure if this is on purpose or not, I'm waiting to hear back from Racingline. It looks like effort was made to expand the pipe and make the hole bigger so I'm sure there is no issue, but I wanted to give you all a heads-up to these two things so you don't scratch your head when you get it on your doorstep like I did. |
Originally Posted by ANNINO
(Post 7471899)
Just so you all know, you are gonna need some RTV sealant too. I spoke with Racingline about the fact that the y-pipe has smooth flanges as opposed to the OEM flanges with extending "tabs" to hold and seat the gaskets. They said to just use RTV to hold the gaskets to the header/pre-cat side while you mate-up the y-pipe.
Another concern I have is that the rear-facing forward flange has a much bigger hole than the forward-facing one. The crush gasket does not fully seat against the flat part of the flange - it overhangs into the pipe. Not sure if this is on purpose or not, I'm waiting to hear back from Racingline. It looks like effort was made to expand the pipe and make the hole bigger so I'm sure there is no issue, but I wanted to give you all a heads-up to these two things so you don't scratch your head when you get it on your doorstep like I did. |
Originally Posted by 1sik4dsc
(Post 7471965)
thanks for the warnings, my pipe should be coming in later in the week, Overall did you feel a difference in performance?
|
Just finished installing the Y-pipe. It fits perfectly and bolts up very nicely. I gotta stress that it is imperative that you get new crush gaskets. The rear one you could probably reuse, but mine was all rusty so I am def. glad I got a new one. If you live anywhere that uses salt, be prepared for lots of rusty nuts and bolts. The front 6 weren't bad, and a little work with a giant breaker bar took care of them easily. I spent about 2 hours wrestling with the rear two nuts though. They are in a very tough space with not alot of room for finagling a breaker bar in there. If the car was on a lift it woulda been easy, but jacked up forget it. I made a makeshift medium sized breaker bar out of a 1/2" x 12" socket extension. Took alot of muscle, but they finally broke loose.
I don't think I have any leaks.... would it be blatantly obvious? Can't say much about performance yet, I was so frustrated with how long it took me, I just took a spin around the parking lot to check for leaks. The sound at startup has this nasty deep growl. I need to have my gf rev it for me while I stand behind the car to get a feel for the sound. Tomorrow morning's highway cruise to work should be fun though.... Overall I am very happy with this product, Racingline delivered a very nice product in the long run. |
Originally Posted by ANNINO
(Post 7475065)
Just finished installing the Y-pipe. It fits perfectly and bolts up very nicely. I gotta stress that it is imperative that you get new crush gaskets. The rear one you could probably reuse, but mine was all rusty so I am def. glad I got a new one. If you live anywhere that uses salt, be prepared for lots of rusty nuts and bolts. The front 6 weren't bad, and a little work with a giant breaker bar took care of them easily. I spent about 2 hours wrestling with the rear two nuts though. They are in a very tough space with not alot of room for finagling a breaker bar in there. If the car was on a lift it woulda been easy, but jacked up forget it. I made a makeshift medium sized breaker bar out of a 1/2" x 12" socket extension. Took alot of muscle, but they finally broke loose.
I don't think I have any leaks.... would it be blatantly obvious? Can't say much about performance yet, I was so frustrated with how long it took me, I just took a spin around the parking lot to check for leaks. The sound at startup has this nasty deep growl. I need to have my gf rev it for me while I stand behind the car to get a feel for the sound. Tomorrow morning's highway cruise to work should be fun though.... Overall I am very happy with this product, Racingline delivered a very nice product in the long run. |
Originally Posted by ANNINO
(Post 7475065)
Just finished installing the Y-pipe. It fits perfectly and bolts up very nicely. I gotta stress that it is imperative that you get new crush gaskets. The rear one you could probably reuse, but mine was all rusty so I am def. glad I got a new one. If you live anywhere that uses salt, be prepared for lots of rusty nuts and bolts. The front 6 weren't bad, and a little work with a giant breaker bar took care of them easily. I spent about 2 hours wrestling with the rear two nuts though. They are in a very tough space with not alot of room for finagling a breaker bar in there. If the car was on a lift it woulda been easy, but jacked up forget it. I made a makeshift medium sized breaker bar out of a 1/2" x 12" socket extension. Took alot of muscle, but they finally broke loose.
I don't think I have any leaks.... would it be blatantly obvious? Can't say much about performance yet, I was so frustrated with how long it took me, I just took a spin around the parking lot to check for leaks. The sound at startup has this nasty deep growl. I need to have my gf rev it for me while I stand behind the car to get a feel for the sound. Tomorrow morning's highway cruise to work should be fun though.... Overall I am very happy with this product, Racingline delivered a very nice product in the long run. |
Originally Posted by MaxLoverAz
(Post 7475527)
AWESOME! Let us know also what it's like a cruise not just at full throttle...
Startup - car has a nice little growl. Not as loud as my Z was, but def louder than stock. Acceleration - the car DEFINITLY pulls very noticably harder. At 1/2-3/4 throttle (which is where I usually am for normal accel.) the car takes off with alot more punch. I was grinning from ear to ear. Overall sound - hard to say really, It's difficult to gauge it from the cabin. This afternoon it should be nice out, so with the windows down I will be able to hear it (32degrees on the way into work this morning... sorry but those windows stay UP). But from what I've experienced so far I am very happy and it is def. louder... just cant give you an honest impression yet. Highway cruise - Stock sound, very quiet |
Awesome! I just placed my order. :D
|
Sweet! Let us know how your mpg's are :D
|
great news! just placed an order. how long did it take to receive if ordered through standard USPS? is it lighter than stock?
|
Originally Posted by fsan
(Post 7476139)
great news! just placed an order. how long did it take to receive if ordered through standard USPS? is it lighter than stock?
|
Thanks ANNINO! can't wait till mine gets here. Were you able to re-install the OEM pipe support bracket? or does it just hang there by the bolts?
|
Originally Posted by fsan
(Post 7476295)
Thanks ANNINO! can't wait till mine gets here. Were you able to re-install the OEM pipe support bracket? or does it just hang there by the bolts?
|
Thanks Annino, I took your advice and invested in a breaker bar before my pipe arrived today. It took me about an hour and fifteen minutes on my back to do the install. The RTV came in handy to hold the crush gaskets also. Now it's time to clean up and take her for a spin!! :D
|
Originally Posted by Tooruff
(Post 7476432)
Thanks Annino, I took your advice and invested in a breaker bar before my pipe arrived today. It took me about an hour and fifteen minutes on my back to do the install. The RTV came in handy to hold the crush gaskets also. Now it's time to clean up and take her for a spin!! :D
|
The exhaust sounds good in the 1800-2500 rpm range. I was expecting more after seeing the Racingline clip. I'm not mad though. I'm in the passnget seat right now and my fiancé who never speeds is having a ball with the power and handling. I'll let you know more tomorrow.
|
my pipe came yesterday, cant wait to install it this weekend!
|
mine coming on Tuesday i cant wait to hear it with my straight pipe =D
then im gonna go to jersey to get my dyno tune done =D |
All times are GMT -7. The time now is 04:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands