![]() |
Custom CAI, CoryXavier BOPs, Racingline Y-Pipe, Borla CBE - Drive by and Start up
Here's a quick vid, it ain't Go Pro like GM's (bastard) but it's aiiiiight
http://www.youtube.com/watch?v=GNseMIA30J4 |
When you're cruising at 70-80, how's the noise level inside the car?
|
Originally Posted by Ghozt
(Post 8216611)
Here's a quick vid, it ain't Go Pro like GM's (bastard) but it's aiiiiight
http://www.youtube.com/watch?v=GNseMIA30J4 http://files.myopera.com/JanetB/albu...nna%20Hate.gif |
she sounds like a beast now. You were right about the bops going great with the cai.
ill get her even beastly with the next project. lol you know what im talking about |
Originally Posted by D-SV
(Post 8216697)
When you're cruising at 70-80, how's the noise level inside the car?
|
sounds really good man! damn that CAI sounds mean, thats def. gonna be my next mod. think you could send me a pm on how you relocated the battery for it?
|
Sounds awesome.
|
so the bop plates made it that much louder nice i think im going to get these are some more feedback i have the same y pipe and exhaust
|
Originally Posted by 2009maxima sv-sport
(Post 8217411)
so the bop plates made it that much louder nice i think im going to get these are some more feedback i have the same y pipe and exhaust
|
Originally Posted by Ghozt
(Post 8217424)
the CAI didn't hurt either :D
|
Originally Posted by 2009maxima sv-sport
(Post 8217456)
i have the k&n cai and its petty loud to begin with i had to deaden the rear and doors and now its less noisy inside
|
U have the k&n CAI? Or do u mean the SRI?
|
Originally Posted by Kmoney
(Post 8217577)
U have the k&n CAI? Or do u mean the SRI?
|
Originally Posted by Ghozt
(Post 8217878)
everyone calls the short ram airs "CAI" because thats what the manufacturer calls them...they're actually warm-air-intakes...
|
I currently have the R2C intake (filter shield is awesome) and just installed the BOP's yesterday. After resetting the ECU, it seemed to run a touch rough for a minute or so. But then it came alive! I have seen a few on here said that they experienced a small loss of power at take off....I did not. I can verify what the others have said that through the powerband, this Maxima now surely has an increase of power, and a nice roar that will turn heads. I will not mess with the exhaust, I feel backpressure is too important with these motors. I put new exhaust on my 350Z and I lost power. I went and topped off with some 93 octane and I will report back with any mileage increase. 80% of my driving is expressway....looking forward to the claimed increased mileage. Sure makes this steed so fun to drive!
|
Originally Posted by Ghozt
(Post 8216611)
Here's a quick vid, it ain't Go Pro like GM's (bastard) but it's aiiiiight
http://www.youtube.com/watch?v=GNseMIA30J4 LOL, just kidding..., :D. You have a great driveway and nice house. Aggressive and good looking Max too. As for the sound, that is very aggressive. That is the sound I wish I could get if I knew just the right things to buy. Keep up the great work. |
Great video. Awesome combination of intake and exhaust. It really makes the 3.5 sound like a beast. Now only if someone can fabricate some headers...
|
Thanks guys! Yeah I wanted a nice aftermarket tone but nothing ricey or raspy (and definitely no cabin drone). Lots of people don't like the Borla cause they say it's too quiet, in my opinion its just loud enough. As you can tell the only thing you hear when I have it at WOT is the intake anyway lol. I really like how the intake sound ended up, it was nice with a SRI, a little better with the CAI, and awesome now with the BOPs as well.
|
Ghozt our cars are twins! The only thing is different my tints are 3% all around, Stillen Lip is blackedBb.b out in the middle, couple of more things but they are little!
|
Originally Posted by Makc1kNYC
(Post 8223642)
Ghozt our cars are twins! The only thing is different my tints are 3% all around, Stillen Lip is blackedBb.b out in the middle, couple of more things but they are little!
|
Just got a chance to see tge video! I am in love with that borla! Going to call my exhaust shop to see how much it woukd cost me :-)
|
All times are GMT -7. The time now is 08:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands