New 2018 Jemini Performance Y-Pipe for 7th and 8th gen maxima
#1
New 2018 Jemini Performance Y-Pipe for 7th and 8th gen maxima
Hi Max Fam! The time has come for this project to take flight.
As you know not many options in this department right now other than Motordyne. I wanted to bring another option to the table for those looking for the original Racingline upgrade and smooth power and performance from the y-pipe.
What not many of you know is that Racingline used only the basic materials to build the original ypipe. I had it tested and it revealed the actual material of pipe was mild steel with Aluminum on the surface, SS201 for flexible pipes, and mild steel for the flanges. Through much research ss201 is not suitable for this product because of the high corrosion and lower quality of stainless steel. I could have gone aluminized, ss201 or even ss409 or ss410; but I chose ss304. According to summit racing and many other websites ss304 is the top of the line material you can use and will last over 8-10 years. please read the following articles for your own insights. SS304 is miles ahead of ss201.
https://www.summitracing.com/experta...ve/answer/3932
I've been a part of this group for almost 4 years now. I'm not here to scam anyone or take anyone's money and I've dealt with alot of people here. The company I've contracted with needs an up front deposit. I'm buying a house right now so I cannot make any purchases this big at the moment. The pricing I am offering on these will be $300 plus shipping. However, I need just 5 people to put a deposit down to get this started. I will offer free shipping to those 5. If I can get 10 I would be willing to offer free shipping to those 10. Anything beyond the 10 will be $300 plus shipping. A great price if you ask me considering this:
These come with a 2 year warranty and ALL GASKETS ARE INCLUDED!
Pm me, message me, reply back, FB message me. this post will be on 7th and 8th gen maxima forums as well as the 7th gen maxima FB group.
The sooner we get the deposits in the sooner this will happen. The company is ready to roll. If we can get the money in by the end of January i'll have ypipes ready for shipping by end of February if not sooner!
As you know not many options in this department right now other than Motordyne. I wanted to bring another option to the table for those looking for the original Racingline upgrade and smooth power and performance from the y-pipe.
What not many of you know is that Racingline used only the basic materials to build the original ypipe. I had it tested and it revealed the actual material of pipe was mild steel with Aluminum on the surface, SS201 for flexible pipes, and mild steel for the flanges. Through much research ss201 is not suitable for this product because of the high corrosion and lower quality of stainless steel. I could have gone aluminized, ss201 or even ss409 or ss410; but I chose ss304. According to summit racing and many other websites ss304 is the top of the line material you can use and will last over 8-10 years. please read the following articles for your own insights. SS304 is miles ahead of ss201.
https://www.summitracing.com/experta...ve/answer/3932
I've been a part of this group for almost 4 years now. I'm not here to scam anyone or take anyone's money and I've dealt with alot of people here. The company I've contracted with needs an up front deposit. I'm buying a house right now so I cannot make any purchases this big at the moment. The pricing I am offering on these will be $300 plus shipping. However, I need just 5 people to put a deposit down to get this started. I will offer free shipping to those 5. If I can get 10 I would be willing to offer free shipping to those 10. Anything beyond the 10 will be $300 plus shipping. A great price if you ask me considering this:
These come with a 2 year warranty and ALL GASKETS ARE INCLUDED!
Pm me, message me, reply back, FB message me. this post will be on 7th and 8th gen maxima forums as well as the 7th gen maxima FB group.
The sooner we get the deposits in the sooner this will happen. The company is ready to roll. If we can get the money in by the end of January i'll have ypipes ready for shipping by end of February if not sooner!
Last edited by The Wizard; 01-17-2018 at 08:46 AM.
#2
I'm working with the company to produce a prototype with pics so you all can see it. i'll post once completed.
#5
If I see pictures and see that you're registered as a vendor I'd be interested. I'm not going to send my money to just someone over payapl though. I want a receipt and everything showing what I'm supposed to get. Names/business and all.
#6
I will be registering as a Vendor once the prototype and group set is built. please understand this is a huge undertaking for me and by the time it's all said and done i'll be out of pocket thousands of dollars when I could have just installed it for $275 and been done. people don't understand how much work it takes to make something happen like this and the cost I've had to bear. if it makes you feel better I can list these on ebay or whatever you like so you have additional security. but I promise when these start selling you'll feel more confident. oh and it also costs to be a vendor on here, the price i'll pay for also.
#7
To become a Vendor, please call 1.888.879.0146 and/or visit https://www.internetbrands.com/contact-us/
Note, IB is not the easiest to get a hold of, so trying reaching them from different avenues (ie through the "Contact Us" at the bottom of the forum)
Thank you
Note, IB is not the easiest to get a hold of, so trying reaching them from different avenues (ie through the "Contact Us" at the bottom of the forum)
Thank you
#8
Hey Wiz, I reached out to them the same day you first advised me to become a Vendor. I received an email response shockingly within the hour and I understand the duties and charges. once I have the prototype and am ready to accept funds i'll register and be setup
#9
I'm interested! Let me know when the prototype is ready, deposits are ready to be accepted, and when the estimated ship dates would be.
#10
#11
So I want to update everyone. Jemini prototype was installed on 2/19/18 and has been flawless. install was perfect, everything lined up and I do have videos on 7th gen maxima facebook. It's been running great. production for the lot is underway and will be completed by the end of the month. they will ship all ypipes to me then I will register as a vendor through the org and will begin direct sales. I did get enough deposits to finish paying the company, so this IS HAPPENING! THANK YOU ALL! I will update in a few weeks.
#15
#16
I'm arranging shipping for the ypipes now. in a few weeks i'll have them all in my possession and will register as a vendor. I appreciate everyone hanging in there, I know it's been a long time (6 months in the making) but it's all coming together for good.
#17
Since things are progressing nicely and you're close to asking for payment/shipping within the next few weeks, I see no reason not to finalize becoming a Vendor. Once you're a Vendor, please shoot me a PM and I'll gladly re-open the thread.
Thank you.
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
Brian Makuch
8th Generation Maxima (2016-)
4
03-15-2019 03:43 AM
Brian Makuch
New Member Introductions
0
10-07-2017 05:01 PM
Khan.97
8th Generation Maxima (2016-)
1
09-08-2015 04:45 PM
official_style
8th Generation Maxima (2016-)
22
06-12-2015 10:27 AM