Will 20 inch rims fit on 2016 Max?
#123
Could you get a side profile shot of the rear wheels on your Maxima to see how far they stick out?
Thanks
#124
#125
Hi guys new to the forum just picked a new white Platinum with medallion package for my wife. I'm wanting to swap out the medallion wheels for some 20x10 Rohannas in a +45 offset with some 255/35/20 tires front and back. Vehicle will stay stock height for awhile since our current drive way is on a incline. Trying to avoid scrapping the front bumper. For you guys running the 20x10 setup, are you guys having any clearance issues with that setup while being stock height? I may drop the car later maybe an 1" or so, but it will be a while. Thanks..!!
#130
Well stated. Hanging on 22+ inch plus wheels (not rims) and the larger tires in many cases can add lots of extra weight which will in fact slow down your cars performance in the quarter and 0-60. That combined with a truck like ride seems like too many trade offs. Wheels that are forged are made better and alot lighter so that is a better way to go but it will cost much more.
#131
Does anyone have a picture of this said metal plate? I'm worried about the 20x10 +45 with 255 /35r20 will rub on this plate.
#132
So I'm set on running a full set of Rohanna RF2 20x10 +45 with 255/35/r20 square on my wife's Maxima. I recieved great input from a couple members as far as fitment, but still worried about rubbing even though vehicle will be stock height. So I decided to pull off the front wheel liner and do some peeking. I believe I found the plate a couple members have mentioned about removing. This plate seems like the most likely location to rub since there is a rectangular hump that protrudes out from the plate. I not exactly sure about the purpose of the plate, maybe to add extra protection from blow out? Doesn' look like it would really add much more rigidity. I also didn't notice any major wiring harness behind the plate either at least on the drivers side. I'll probably remove the plate, heat up and reform the plastic liner in that location for extra clearance. 🤔
#133
So I'm set on running a full set of Rohanna RF2 20x10 +45 with 255/35/r20 square on my wife's Maxima. I recieved great input from a couple members as far as fitment, but still worried about rubbing even though vehicle will be stock height. So I decided to pull off the front wheel liner and do some peeking. I believe I found the plate a couple members have mentioned about removing. This plate seems like the most likely location to rub since there is a rectangular hump that protrudes out from the plate. I not exactly sure about the purpose of the plate, maybe to add extra protection from blow out? Doesn' look like it would really add much more rigidity. I also didn't notice any major wiring harness behind the plate either at least on the drivers side. I'll probably remove the plate, heat up and reform the plastic liner in that location for extra clearance. 🤔
#134
#135
If I wanted to run 20x10 +38 offset would it rub? Would run 255/35/20 tires on it
Has anyone gone +35 offset with no issues? want to get the deepest concave in my rim possible
Cant wait to see this!
Has anyone gone +35 offset with no issues? want to get the deepest concave in my rim possible
Cant wait to see this!
#136
Hopefully quick & easy question
Hey folks,
So I'm narrowing down getting new rims/tires for summer. I pretty much got the wheel I'm going w/ but have been researching various threads here on size & doing a stare & compare w/ member feedback on what sizes rub/don't rub & trying to nail down offset & tire width. On willtheyfit.com it doesn't look like the poke & inset would be a huge difference if I get 19x9.5 w/ an offset of +42 to +45.(Tire size of 255/35/19) I am planning on lowering as well w/ Eibach springs. From all of the members that have provided feedback, it seems like offset of lower than +40 makes it more likely for rubbing. If anyone has feedback or running this size that can confirm, I would really appreciate it.
Thanks!
bghouse
So I'm narrowing down getting new rims/tires for summer. I pretty much got the wheel I'm going w/ but have been researching various threads here on size & doing a stare & compare w/ member feedback on what sizes rub/don't rub & trying to nail down offset & tire width. On willtheyfit.com it doesn't look like the poke & inset would be a huge difference if I get 19x9.5 w/ an offset of +42 to +45.(Tire size of 255/35/19) I am planning on lowering as well w/ Eibach springs. From all of the members that have provided feedback, it seems like offset of lower than +40 makes it more likely for rubbing. If anyone has feedback or running this size that can confirm, I would really appreciate it.
Thanks!
bghouse
#137
245/30/20
245/30/20's and yes their is a slight rub on the front's when doing a tight turn/u-turn's.
245/30/20's and yes their is a slight rub on the front's when doing a tight turn/u-turn's.
245/30/20's and yes their is a slight rub on the front's when doing a tight turn/u-turn's.
#138
Anyone interested in adding a nice touch to the interior of their max get these real aluminum layover switches <br/>EBAY Chrome Front seats adjust button switch Cover trims For 2016 2017 2018 Nissan Maxima<br/>Chrome Front seats adjust button switch Cover trims For 2016 2017 2018 Nissan Maxima<br/>( 192206209165 )<br/>
#151
Thanks
I just wanted to thank everyone's input, information & help on this thread! After extensive looking and research I finally got my new shoes & luv em. Looking forward to installing my eibach springs in the next couple weeks, once I get my garage cleared. But on the wheels I ended up going w/ KMC 685, machined face, satin black. 19x9.5' w/ Nankang 245/40/19 tires offset +42. Very happy to report a perfect fit w/ no rubbing. Thanks again everyone!
#152
I just wanted to thank everyone's input, information & help on this thread! After extensive looking and research I finally got my new shoes & luv em. Looking forward to installing my eibach springs in the next couple weeks, once I get my garage cleared. But on the wheels I ended up going w/ KMC 685, machined face, satin black. 19x9.5' w/ Nankang 245/40/19 tires offset +42. Very happy to report a perfect fit w/ no rubbing. Thanks again everyone!
#157
Absolutely. We make a variety of 20" wheels (1 piece, 2 piece, 3 piece) for the Maxima! Our head of shipping owns a 2017!
https://www.youtube.com/watch?v=fxOje7_vclY
https://www.youtube.com/watch?v=fxOje7_vclY
#159
#160