2003 maxima lowering questions
#1
2003 maxima lowering questions
Hey everyone I recently picked up a set of tein s techs for my car. I know on all of my previous cars (vw's with h&r's) i was told just go with the factory alignment specs.
With this what else will I need, i am going to get strut bushings and all of the other related parts, bolts nuts etc.
The car is straight and has never been hit, will i need any caster/camber kits from the dealer when i go to do the alignment? i called and talked to the guy who does them at our local tire place that we used for my job and he said its hit or miss sometimes with maximas. I just dont want to drive around with the alignment being out of whack and destroying the new tires.
Thanks for any input
Jay
With this what else will I need, i am going to get strut bushings and all of the other related parts, bolts nuts etc.
The car is straight and has never been hit, will i need any caster/camber kits from the dealer when i go to do the alignment? i called and talked to the guy who does them at our local tire place that we used for my job and he said its hit or miss sometimes with maximas. I just dont want to drive around with the alignment being out of whack and destroying the new tires.
Thanks for any input
Jay
#2
No the tiens should have some camber adjustment on them already and from my experience no caster adjustment should be required. Really the only adjustment that will be necessary will be toe due tot he ride height being changed.
Thread
Thread Starter
Forum
Replies
Last Post
wingsfan24
5th Generation Maxima (2000-2003)
1
08-15-2015 07:35 PM