Koni Yellow w/ GC, top hats?
Thinking about getting the yellows with ground control sleeve setup, but as I research on the combo, it is recommended to get extended top hats. I want at least a 2.5" drop. I see that there is only ones produced for Honda/Acura. What's the deal? Anyone know where to get extended hats for a 4th gen?
|
I have yet to see any.
|
Extended hats might be something to increase suspension travel. I think they are talking about upper top mounts which give the spring/strut more travel to move up and down. For years I had tried to get these made for Maximas but no one wants to make the investment as there is no profit to be made on this platform. That said I would not recomend Koni yellows and GCs with a 2.5" drop even with extended suspension travel. That is to low of a drop for this combo and the setup will have little to no travel left over and be harsh on every bump.
If you are doing this for looks go with a set of aftermarket coilovers. They are made to take a bigger drop than the GC/Koni setup. For handling a set of propely valved Koni yellows and GCs with a slight drop is a decent combo. I probably have the most modified set of Koni/GCs on this forum and if I had to do it all over I wouldn't take the same route. |
The 1st gen Altima top hats gave more suspension travel in the front on the 3rd gens. See if you can measure the difference for what your working with.
|
All times are GMT -7. The time now is 01:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands