gous44ls

This just changed my life! A bracket made to fit the Akebono Calipers to the maxima. You will either need to machine down the factory 14" 370z rotors or you can just use Mitsubishi Evo X GSR 13.78″ (350 MM) rotors. This opens up so many new possibilities!

Link to brackets:
https://www.ebay.com/itm/Front-Akebono-Big-Brake-Caliper-Rotor-Upgrade-Adapter-Bracket-For-300ZX-Z32/142692776193?fits=Model%3A300ZX&hash=item213926f90 1:g:LqAAAOSw~89ah4Fa

gous44ls

These are made for the 300zx but as most know will bolt right up to our cars.

ChrisMan287

iTrader: (34)

Correct. They will bolt up.

krismax

iTrader: (15)

could we use stock g37 and 370 z calipers?

danmack34

iTrader: (7)

Any pics of them installed goul44ls

ChrisMan287

iTrader: (34)

@danmack34

danmack34

iTrader: (7)

thanks @ChrisMan287 I did the 996 front / rear calipers on the m3 with CSL rotors so for the maxima it seems fitting lol I found the calipers for $48 each (with core charge) but realistically $250 said and done if I don't return a core which im gonna have to ask about. EvoX 350mm rotors (Ill have to make sure the center bore is the same) and the adaptors is everything ? no line adaptors ? I take it now is the time to go stainless lol anyone do the rear calipers yet ? Even if I have to eliminate the E brake (since its a auto (not by choice it fell into my lap lol))

danmack34

iTrader: (7)

also @ChrisMan287 theres 3 other adaptors for the 300zx for "front big brake kits" for dif rotors and such, I take it I should just stick to the adaptor that was shared above and the evo 350mm rotors?

ChrisMan287

iTrader: (34)

I can't confirm that the other brackets will work but I can assume that they will. You should be able to use stock lines but it won't hurt to switch to stainless.

No rear options that I can think of...