4.5gen dyno Numbers (3.5 swap)
 

I was wondering what are the adverage dyno Numbers for a 4.5 gen with 3.5 swaps and what Mods you have. and your dyno slips.

in 4 results as well

everyone will see mine at Maxus......

:sprint: There will be a thread. Can't wait.

Average depends on mods ... obviously. :idea:

Might want to check the dyno section. I've got quite a few A32B .DRF's myself.

mine probably puts down in the neighborhood of 185-190whp and 220lb-ft. I have a USIM on the car that's why the HP number is so low.

auto or 5spd?

Dude .. it's nealoc .. Gotta be 5MT.


For clarification, he has a 3.0L USIM on his 3.5L.

The one we dynod down here put down almost those exact numbers. The car now has the 00VI with the 3.5 bottom. We have yet to dyno that setup.

i dynoed at 228whp/226wtq on a dynojet on SAE correction. 3.5 w/3.0 timing, 3 inch exhaust, cattman y pipe, stock headers, no intake, SAFC tuned. it put down 199 untuned..

that was without the s/c? and was it a stock ecu?

yup. that was stock ecu with an AFC I,stock maf. i'll dig up my dyno charts in a few minutes. i made 316whp with the 6 pounds of boost.

edit*** heres my dyno. i had power and torque backwards lol.

http://i101.photobucket.com/albums/m...35allmotor.jpg

http://memimage.cardomain.com/ride_i...0026_large.jpg

ported A32 MAF sensor
70mm PF TB
A33 IM hand ported/polished
JDM cams (same specs as JWT)
test pipe
2.5 inch electric exhaust cutout in test pipe
2.5 b-pipe and hooker muffler
JWT VQ30 ecu with 7000rpm redline
UR underdrive pulley
Spec stage 2 clutch/stock 4th gen flywheel
cattman headers
adjustable fpr
SAFC II/zeitronix WB02 tune

try looking at the sticky

http://forums.maxima.org/all-motor/3...vq35-swap.html

Mine put down 223/209 on a mustang dyno. At the time all it had was the SSIM, Intake, and Exhaust. They dyno'd it in 3rd gear though.

I did 232/242 after tuning. I have altima headers & y-pipe, intake with a SAFC-II no other mods