Got's New Junk in the Trunk!!
 

I just finished my first custom sub box. OK, don't flame me for the junk amp or sub. Its just temporary. Its a single 12 in a sealed box. (Ports were filled after i tested it. Sounded like dookey with the twin 4" ports) It sits right against the back seat at a perfect angle. Its made of 3/4" mdf and 3/4" plexi. This box pounds! Can't wait until i get a better sub and amp!! I'll get more pics from the trunk once i get a chance.

http://www.pages.drexel.edu/~jw29/FrontShot.jpg
Pic of it before carpeting from the front.


http://www.pages.drexel.edu/~jw29/BackShot.jpg
From the back.


http://www.pages.drexel.edu/~jw29/InsideLight.jpg
From Inside with the dome light on.. Just gotta cover up that metal bar.

http://www.pages.drexel.edu/~jw29/InsideDark.jpg
Armrest down. LED light strip inside the box..

thats a tight *** set up... i was trying to make one but i was afraid that i would mess up and just make an *** out of myself... and i was wondering how u made the set up look soo nice... if u could give me a site... or give me a DIY info then that would be dope... alright thanks

Can't really give you a write up, but its basically a plan/measure/cut/glue process. I think looking at the pictures will help alot.

do u have any pictures from the outside of the trunk looking in... alright thanks

nice... how'd u get the armrest to open to the trunk like that?

tight setup like he/\ said - i wish i had the ****in skills and brains to do all that - hot tho - u wana make me one? for my 91 - hehe so i can take my ****y a** box out -

New Pic looking in from trunk!!
 

Heres a shot from my trunk. What you guys think?

http://www.pages.drexel.edu/~jw29/drunksmall.jpg

Andy21 - Its real easy to get the armrest to open up to the trunk. In the trunk just take out the piece of carpeted cover by popping out those plastic retainers (i can't remember how many). Then you just gotta take out the piece of cardboard which comes out with some screws. This cardboard is what you see from inside. Comes out very easy.

Thats a really nice clean enclosure. I really need to build one myself, but I've never tried. Only installed systems and ran wires. I also need to install my alarm, but I've never tried that either.

that does look nice, johnny...

alarms not that hard i installed mine bout a month ago.

Custom Trunk
 

Good job man...I work a stereo shop and so many times I see people do a crappy job but yours is A1. My web page that shows my custom work is messed up right now. Some of my pages got deleted but I will fix it when I get home from Saudi Arabia. Once again nice job !!

Slammin' set up, like everyone else said, I want to build my own now. Which model do you have, are those the factory seats, they look tight.

Thats an awesome box, and even more awesome as your first. I really like the cap/amp mounting.

real clean... nice work.

I was thinking of etching MAXIMA across the plexi on the amp rack since i have LED's in there shining. What do you think?

that would be pretty cool. but make sure both sides have LEDs or else only one side of the etching would glow.

Did you use any write ups or wiring diagrams that you can post? I need all the help I can get, if I'm going to attempt this.

umm...just curious...why is that area under the door blue and red in that pic? is it the pic or is the car really colored like that?

No, thats just a bad pic on my camera phone. I bought a new digital camera and thought I had updated my sig. Well, I guess I'll fix that right now.

*Edit* Done!!! How's that?

..... :thumbsup: .....

http://images.cardomain.com/member_i.../403123_10.jpg




shhhhhh.....

johnny that box is awesome. that is just like the box im been dreming of in my head. ahhhhh get out get out! lol butneway its too bad you cant do a write up on it. Great Work!