NISformance 2003 Maxima FWD HR stock cams 314 whp 284 tq
Since we got our dynojet last year we have decided to throw out all previous testing on FWD VQ's!
Safe to say we have learned a LOT. We are making MORE power with LESS mods! We like to keep it simple, Intake, headers, exhaust and full tune. This works well on stock internal engines. Here we have a 2003 Maxima with 2009 Maxima FWD HR engine NISformance high power 3.5" intake Headers 3" catback Haltech 255lph fuel pump stock HR injectors best runs are 314 whp and 286 tq STD CF 308 whp and 280 tq SAE CF ;) https://cimg7.ibsrv.net/gimg/maxima....5bbd4f6121.jpg Red = short length intake pipe Blue = longer intake pipe Green = even longer intake pipe Yellow = my original FWD HR swap back in 2012 As you can see we have major gains vs my old 02 first fwd hr swap car! Also our high power intakes are tuned for a specific rpm (change the pipe length 1 inch and this changes) Thats a very nice bump in power at 6500 just from using a specific length intake pipe! We are still working on intake development, trying to release them later this year! We are continuing to test and find ways to make the most power possible with FWD VQ! www.NISformance.com |
Awesome. Great job Darren. :jump:
What size of intake is used? 3.5 or 4? Is the tuning done on Haltech or stock ecu reflash? I am assuming these numbers are from Haltech tune. Correct me if I am wrong. I have to get mine tuned too now. You will be hearing from me soon. :D |
Originally Posted by DragonX0104
(Post 9147112)
Awesome. Great job Darren. :jump:
What size of intake is used? 3.5 or 4? Is the tuning done on Haltech or stock ecu reflash? I am assuming these numbers are from Haltech tune. Correct me if I am wrong. I have to get mine tuned too now. You will be hearing from me soon. :D This one is Haltech with working EVT. Very similar results can be had without haltech, just the ecu reflash and no working evt. |
Post back up when you have 3.5" intakes available for sale!
|
i will be searching for a 5.5 gen when i finish my project:D
|
Originally Posted by 95maxrider
(Post 9147868)
Post back up when you have 3.5" intakes available for sale!
|
Are you going to become a certified NIStune vendor/tuner?
|
Originally Posted by 95maxrider
(Post 9149943)
Are you going to become a certified NIStune vendor/tuner?
|
Originally Posted by SurraTT
(Post 9149985)
No, we focus on FWD HR 3.5's 09+maxima engines. into 2002+Maximas. For nearly any setup these are the best performing.
|
Originally Posted by 95maxrider
(Post 9149994)
So no love for 4th gens then, huh?
|
Originally Posted by SurraTT
(Post 9150683)
Yeah now that we can tune 02 03 ecus 4th gen full ecu swap with fwd hr engine is a great setup!
|
Originally Posted by 95maxrider
(Post 9150705)
Did something happen that allowed a full ECU swap to a 5.5th gen to be much easier or are you just really good at it?
look on, facebook.com/NISformance |
All times are GMT -7. The time now is 02:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands