Water Jet
I run two water jets all day if you guys need anything cut.
|
have you read this thread and the one attached to it in the post #1?http://forums.maxima.org/5th-generat...h-shields.html a lot of 5th gen guys are interested in this if you can look into it that would be great.
|
Originally Posted by BigLou55
(Post 8619652)
have you read this thread and the one attached to it in the post #1?http://forums.maxima.org/5th-generat...h-shields.html a lot of 5th gen guys are interested in this if you can look into it that would be great.
|
Originally Posted by Cutthroat
(Post 8619519)
I run two water jets all day if you guys need anything cut.
thanks! |
Originally Posted by DanNY
(Post 8620484)
awesome...if you plan to sell products on the forum then you'll need to a vendor.
thanks! |
If you still have the AE your parting out this could work out great. You will have any measurements you needed at your fingertips. Do you have the OEM engine splash guards?If I had a set of the OEM splash guards I'd send them to you but mine were gone when I purchased the car.
|
Interested in a radiator shroud for an '04 G35 coupe. :D
I'll see if I can get my hands on a blueprint, if you can give me an idea on price. At best, I can tell you that you'll probably need ~45"x10" sheet of aluminum. |
Originally Posted by Mr. Brett
(Post 8622103)
Interested in a radiator shroud for an '04 G35 coupe. :D
I'll see if I can get my hands on a blueprint, if you can give me an idea on price. At best, I can tell you that you'll probably need ~45"x10" sheet of aluminum. |
Bump for great pricing and customer service for Cutthroat.
|
Any suggestions ? wheel spacers, brake brackets ?
|
How about Header flanges, I can make them from any material and thickness.
|
All times are GMT -7. The time now is 04:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands