4DSC Decals - ARE BACK IN STOCK!
The first run I made of the original 4DSC decals was a tremendous success.
At the request of many members representing all generations of Maximas, I have made another short run. While this particular decal is a 3rd gen factory exclusive, I wanted to make these available to all generation owners. I have made a limited run of (100) 'inside mount' 4DSC Decals. NEW addition: I also have done a run of (50) outside window mount versions. OUTSIDE MOUNT DECALS ARE NOW SOLD OUT: For those of you who always wanted them, or those who had them but lost them due to peeling off over time and dying natural death (Chronic Decalitus)... now is the time to jump on them. - They measure 4 x 1.5 inches. - White typeface on clear backing. Pricing is as follows: - (1 decal) for $4 + $1 shipping = $5 - (2 decals) for $7 + $1 shipping = $8 Orders will be fulfilled on a first come first serve basis: If there is demand for more I will run another batch. I will keep buyers appraised of remaining stock. There is no need to put your name down in this thread. Just go ahead and make payment (PayPal only) to account: "hadman [at] rogers.com". --> link PayPal **PLEASE INDICATE ON YOUR PAYPAL PAYMENT IF YOU WANT INSIDE OR OUTSIDE MOUNT DECALS** Below is an example of the decal (and proof of my inventory for wary buyers). Of course, I have been here on the org for 7 years - that should put any fears to rest. Regards, Hadman http://usera.imagecave.com/hadman/4DSCSheet.jpg http://usera.imagecave.com/hadman/4DSCBatch.jpg |
dude make some for those of us that have tint
|
Originally Posted by tigersharkdude
(Post 6453158)
dude make some for those of us that have tint
|
Update: 50 of 100 now sold... in 4 days! Get 'em while they last.
|
This is a representation of the decal on a 5th gen. This is a photoshop (of the actual decal). I didn't have a 5th gen handy to snap a pic of. I'm quite certain an original will look better.
5th and 4th gen owners: please take a photo for me if you can and post it here once you receive them. http://usera.imagecave.com/hadman/4DSC5thCU.jpg http://usera.imagecave.com/hadman/4DSC5THGEN.jpg |
can you take a picture to show how it will look with the 20% tint?
|
ive got an exterior mounted one on my 5.5 gen. want a pic to show people how it looks?
|
Originally Posted by dosmoney
(Post 6465593)
ive got an exterior mounted one on my 5.5 gen. want a pic to show people how it looks?
|
I just wanted to add this link, which explains how to effectively install a decal. It's trickier than one may think getting the placement just the way you want it, and making sure you don't have air trapped behind it.
There are actually handy tips for getting it done right. One link I found on YouTube can be seen here: http://www.youtube.com/watch?v=wt0Hv...eature=related. While this video was posted for a outside window mount, and the specific product they are covering comes with an additional application spray, the same rules apply for our decals. The guy narrating the video has a great voice too. Worth a watch. One thing I should mention, if it's not obvious, is they use an exacto knife to cut away the backing paper. As this is an interior mount and many of us have tint... don't use an exacto knife! lol Scissors are your friend. 24 Decals left... |
Originally Posted by AzureblueZ
(Post 6478749)
Decals arrived today! They look great although I haven't put them on the Max yet but I know they will look great! Thank you for recreating the 4DSC stickers and being an honest seller. I have always wanted one and had started making a reproduction graphic of my own. Yours turned out great and I'm thankful to have a set.
Thanks again! There had been much talk about it over the years, but nobody acted on it. I just wanted to make a contribution. I've had nothing but positive response and that makes me happy. A lot of people were especially pleased by the price I offered them for. So it's a win situation for everybody. They have been selling at a good pace - 84 of the 100 decals are paid for and delivered. I was able to snap a shot of the decal mounted on a 5th gen today at our local meet. This member's car is tinted at 20% and the stealth appearance looks great in my opinion - like it was delivered that way from the factory. This is even more evident looking at it against the outside mounted decal he has. (that is not me in the photo - just another decal admirer lol) http://usera.imagecave.com/hadman/4dscmounted.jpg There are 16 decals remaining!! |
Originally Posted by hadman
(Post 6470587)
I just wanted to add this link, which explains how to effectively install a decal. It's trickier than one may think getting the placement just the way you want it, and making sure you don't have air trapped behind it.
There are actually handy tips for getting it done right. One link I found on YouTube can be seen here: http://www.youtube.com/watch?v=wt0Hv...eature=related. While this video was posted for a outside window mount, and the specific product they are covering comes with an additional application spray, the same rules apply for our decals. The guy narrating the video has a great voice too. Worth a watch. One thing I should mention, if it's not obvious, is they use an exacto knife to cut away the backing paper. As this is an interior mount and many of us have tint... don't use an exacto knife! lol Scissors are your friend. 24 Decals left... These look great! Just sent payment. Could you repost the YouTube link...it's missing the video ID. |
Originally Posted by 2002 Maxima SE
(Post 6519687)
These look great! Just sent payment. Could you repost the YouTube link...it's missing the video ID.
Again, the only difference between the decal in the video here, and the one we are installing is the mounting location (inside vs. outside mount). As such, our decal will appear in reverse to us when we install from the inside, but the other steps outlined in the video are the same. And of note again, they cut their backing paper with an exacto knife. Our application being an inside mount, anyone with tint can not use a knife to cut the backing paper -- use scissors. * I found I had an extra sheet of 6 decals, so the current inventory of decals remaining now stands at 22.* |
I'd like to thank you all for interest in the 4DSC Decals. You've all been great customers.
I am pleased to announce all 100 decals are now SOLD. Best wishes and thanks again! hadman |
Do you think you'll be gettn anymore in.
|
Originally Posted by A32MadMax
(Post 6539197)
Do you think you'll be gettn anymore in.
|
if u make some exterior mounted decals id buy a few.
|
Chances of more?
|
I want two of them..
|
do a batch of black and retire....id buy two. and im sure a lot of people would want black stickers. they looked big is that the factory size.
|
If you do another batch I'll buy one.
|
yeah ill definitely buy one too please make more :]
|
Originally Posted by QNO_A32
(Post 6548924)
do a batch of black and retire....id buy two. and im sure a lot of people would want black stickers. they looked big is that the factory size.
|
ill be interested in two if u make another batch
|
another batch?
|
Thanks for your interest. I'm keeping tabs on the demand... not quite enough demand yet to justify another run, but it's looking healthy.
|
Well I'll try to add to that demand again.. I want 2!
|
PM sent hadman
|
add me to the list. I'll take minimum 2. Maybe 4 for "future" use. :)
|
Originally Posted by Compusmurf
(Post 6616883)
add me to the list. I'll take minimum 2. Maybe 4 for "future" use. :)
hes sold out man. you missed it |
Yeah, but he's "considering" another run. (with enough interest)
|
I'll take one if you make an other batch.
|
I'm also interested. I will take 2 if you make another batch.
|
I will take a few if another batch is run, hopefully in black.
|
I'll buy one if you make another batch.
|
Yeah, me too. I'm very interested!
|
Im in for 2 if you make another batch.
|
put my name on the list if there's another batch run
|
Looks like there is enough interest to get two more runs, or at least sell off another run.
|
id take four 2 for mine and 2 for my wife's maxima thats if you could make them for the outside....
|
I'd be up for two if you did another run.
|
All times are GMT -7. The time now is 04:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands