Custom Urethane Engine mounts Pass/trans
1 Attachment(s)
I have posted in the 4th and 5th gen forums, but it makes more sense to me to have this posted here.
I have developed a solid urethane engine mount insert that will work on any maxima/i30/i35 from at least 1995 to 2003 for sure. It may even work on later models, probably will work on altimas, but I haven't tested yet. For now, it is confirmed that all maximas from 1995-2003 at least use the same size rubber inserts for the passenger side engine mount, and the same size rubber insert for the drivers side upper mount. So if you are looking for an alternative to replacing your oem mounts with something firmer, here is something for you. These will work on all autos, 5 spd and 6 spd trannies with slight modification. With an exacto type knife you can have these fit all models. Driver's Side http://i400.photobucket.com/albums/p...z/_DSC0500.jpg Passenger Side Attachment 35609 Press these pieces of garbage out of your OEM mounts http://i400.photobucket.com/albums/p...z/autovsMT.jpg And tap these in with a hammer or rubber mallet http://i400.photobucket.com/albums/p...gineering1.jpg Price is 150 shipped to the USA from Canada. Here is the original thread from the 5th gen forum, it's very cluttered and I apologize for that, but tons of info on how the part was developed, and testimonials form people who have them in their car. http://forums.maxima.org/5th-generat...otoype-15.html If you are interested please start a list. I can place orders of 10 people at once minimum. Once 10 people have confirmed we will work out the details. The original sets were made at 80a durometer rating, but after some more testing I am going to make these at 70A which is the same rating as what is used to replace the torque mounts on our car BTY, although I designed these, I do not pour the Urethane. I am using a third party to do this for us. All they do is urethane molding. |
I would be interested in a set.
|
i'm down for a set or just the driver's side
pm me when they are available |
what does this do!?
|
Put me in for a set for the drive and passenger side for a 5.5 6sp. I forward this to my friend who is interested in the same set as well.
|
Originally Posted by blkAEmax82
(Post 8767773)
Put me in for a set for the drive and passenger side for a 5.5 6sp. I forward this to my friend who is interested in the same set as well.
On a side note, I thought you were using the 80a urethane before, why are you changing it for this round? |
Hmmm ive been wondering hlw these compare to redlions mounts... Anyone do a comparison yet??
|
i am definitely interested in a set for my 02 auto... this would be killer with a torque link
|
I can't compare to the red lion mounts, but mine are made with the same stuff as the ES torque mounts. I'm sure there is less vibration with mine. As to the torque link, I have heard lot's of people complain that for a DD it can be a little harsh in stop and go traffic. See rochester's comments in the 5th gen section about that.
I can tell you that i have virtually no wheel hop right now. I have tried to induce it on asphalt roads with no luck. Now at the track it might be another matter. For you 6 speed guys, your tranny will not slop around any more. If you keep your hand on the shifter while driving you will notice that the shifter doesn't budge during acceleration at all. You will feel increased vibration with this mod, no doubt about it, but I personally think this is a good alternative to the super hard delrin bushings, and the solid metal post on the torque link. And if you are supercharged, these will fit no problem, where as therre is no room for a torque link if you have that mod Start up a list in here guys and when i have ten names we will figure out what the next step is. I will need a good faith deposit from you all, and payment in full a few days before I place the order with the company that pours these for me. |
1. Maxterror (tmec)
|
Wow great product! I personally got these and I am very satisfied. Vibration did increase a bit but he is right about the wheel hop being gone...
The ride is smoother at highway compared to my old mounts and it responds better when I punch it! Buy with confidence! :) |
1. Maxterror (tmec)
2. blkAEmax82 |
how much modding does one need to do for a auto :(
|
you cut the nibs off on the drivers side for an auto
|
Originally Posted by knight_yyz
(Post 8774545)
you cut the nibs off on the drivers side for an auto
|
poly side mounts
1. Maxterror (tmec)
2. blkAEmax82 3. yguyfc (tmec) |
1. Maxterror (tmec)
2. blkAEmax82 3. yguyfc (tmec) 4. Regime (Both sides) |
1. Maxterror (tmec)
2. blkAEmax82 3. yguyfc (tmec) 4. Regime (Both sides) 5. imported_Nismo_max (both sides copied from other thread) |
I'll buy both...
EMT you the $? |
i'll let you guys know when you need to make payment
1. Maxterror (tmec) 2. blkAEmax82 3. yguyfc (tmec) 4. Regime (Both sides) 5. imported_Nismo_max (both sides copied from other thread) 6. george__ |
1. Maxterror (tmec)
2. blkAEmax82 (both sides) 3. yguyfc (tmec) 4. Regime (Both sides) 5. imported_Nismo_max (both sides copied from other thread) 6. george__ Fixed my reply :) |
1. Maxterror (tmec)
2. blkAEmax82 (both sides) 3. yguyfc (tmec) 4. Regime (Both sides) 5. imported_Nismo_max (both sides copied from other thread) 6. george__ 7. 03GLEmaxima (passenger) |
Not sure why my name isn't on the list but please make a space for me thanks
|
1. Maxterror (tmec)
2. blkAEmax82 (both sides) 3. yguyfc (tmec) 4. Regime (Both sides) 5. imported_Nismo_max (both sides copied from other thread) 6. george__ 7. 03GLEmaxima (passenger) 8. Yoitsme There you go. |
ONLY 2 moooorrre :greenboun |
1. Maxterror (tmec)
2. blkAEmax82 (both sides) 3. yguyfc (tmec) 4. Regime (Both sides) 5. imported_Nismo_max (both sides copied from other thread) 6. george__ 7. 03GLEmaxima (passenger) 8. Yoitsme 9. RebelHell There you go. |
Ok guys, I'm ready to place the order. I am going to order 12 sets, there are always a few stragglers.
As soon as I receive full payment from everyone I will place the order. I'd like to order by May 3rd assuming everyone has paid by then. If this is a problem pm me and let me know. The last time I tried this we had 20 names on the list and only 12 paid. Had I placed the order I would have been burned for 8 sets Paypal is knight_yyz @ cogeco.ca without the spaces. Guys, paypal is going to burn me on exchange rate and paypal fees for cross border stuff. Please send the money as a gift and you pay the smaller fee from your end. Or add 3% to the total. I'll soak up the exchange rate. For my fellow Canadians the same email should work for emt. |
Knight, might I suggest using www.dwolla.com as a paypal alternative? You take a flat $0.25 fee on any transaction over $10. Doesn't matter if it is $10 or $10,000... I use it quite extensively for payments in my resale business.
I know that you are in Canada, so their may be some hoops to jump through, but in the long run it will help your (much deserved) margin quite a bit. Anyway, just a thought, trying to help ya out. BTW, I really appreciate your development efforts into this aging platform!
Originally Posted by knight_yyz
(Post 8776839)
Ok guys, I'm ready to place the order. I am going to order 12 sets, there are always a few stragglers.
As soon as I receive full payment from everyone I will place the order. I'd like to order by May 3rd assuming everyone has paid by then. If this is a problem pm me and let me know. The last time I tried this we had 20 names on the list and only 12 paid. Had I placed the order I would have been burned for 8 sets Paypal is knight_yyz @ cogeco.ca without the spaces. Guys, paypal is going to burn me on exchange rate and paypal fees for cross border stuff. Please send the money as a gift and you pay the smaller fee from your end. Or add 3% to the total. I'll soak up the exchange rate. For my fellow Canadians the same email should work for emt. |
I'm looking into it, but there is nothing on their website about international payments. I sent them an email to see what's up
|
Dwolla Support
APR 23, 2013 | 04:48PM CDT Raymond, Thank you for your email and interest in Dwolla. Not at this time. Currently Dwolla is only available to users within the US and there is no timetable for when we decide to take our services internationally. However, please stay up to date with Dwolla announcements as we continue to expand and improve our services on a daily basis. Sincerely, Dwolla Support www.dwolla.com www.trydwolla.com (Send someone free money on us to get them started) |
Originally Posted by knight_yyz
(Post 8777234)
Dwolla Support
APR 23, 2013 | 04:48PM CDT Raymond, Thank you for your email and interest in Dwolla. Not at this time. Currently Dwolla is only available to users within the US and there is no timetable for when we decide to take our services internationally. However, please stay up to date with Dwolla announcements as we continue to expand and improve our services on a daily basis. Sincerely, Dwolla Support www.dwolla.com www.trydwolla.com (Send someone free money on us to get them started) |
Ya too bad, I could probably sell more of these if paypal wasn't grabbing so much of the pie
|
Knight have you tried the new .org selling contraption may be a option
|
I'll look into that tonight when I get home
|
What's the update on these bad boys?
|
See post 27
|
Have a local that is interested if your still selling these brotha. Do you have them in stock or finangling another GB.
|
have him send today if possible.
|
Trying another group buy and grabbing a few extras this time
|
1. Maxterror (tmec)
2. blkAEmax82 (both sides) 3. yguyfc (tmec) 4. Regime (Both sides) PAID 5. imported_Nismo_max (both sides copied from other thread) 6. george__ 7. 03GLEmaxima (passenger) 8. Yoitsme 9. RebelHell |
All times are GMT -7. The time now is 11:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands