|
FS: Sleeved/3.9 liter VQ block and pistons
I've got a sleeved VQ35 block up for sale.. The block has a custom T-sleeve (made by LA Sleeve for me), that has coolant passages machined in to match ports in the head gasket for better flow/transition between block and head. It has been cleaned, decks have been cut on Rottler CBN to ensure perfect seal, and it is ready to rock. It also has the 5th gen cooling mod, and water neck is included (as shown).
http://www.myspec-v.com/images2/VQSw...NewBuild/6.jpg I also have a set of 11.2:1 custom Wiseco pistons. They are 100.5mm bore, and come with rings, pins, and locks. These will yield 3.9 liters with a stock stroke VQ35DE crank, and 4.1 or 4.2 liters with a stroker crank (depending on which one you use). They are set up for stock rod length and pin.. So, you can use them with stock crank and rods (or built counterparts). Or, you can have a shorter rod made if you use a stroker crank. Big bore piston next to standard size VQ piston.. http://www.myspec-v.com/images2/VQSw...NewBuild/4.jpg Full set.. http://www.myspec-v.com/images2/VQSw...NewBuild/5.jpg I'm asking $1995.00 for the entire setup.. The block alone has more than that in it. It can be picked up or shipped. Or, I can assemble the short block, along with H-beam rods and ARP components for an additional fee. |
that block and pistons look familiar
glws what happened to mine? |
Still have everything.. I actually have a duplicate setup to yours except your pistons are coated.
|
that's so good to hear
and good to finally contact you i have tried many times i need to pick up this project again i have the suspension and brakes to use it now need an engine and tranny how was my old motor and tranny those on board here may remember that motor many years ago put out 300hp [vq35de] [2009] travis does nice stuff please email, pm or call me happy to pay the freight if you still have my nitrous kit too as an aside i tried to set up health care with various docs here some are still available |
3 Attachment(s)
|
go check the commotion
on all sentra [i'm yogib777 there] and b15u lol good to be in contact again i missed you glws and cute pistons, no? |
| All times are GMT -7. The time now is 09:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands