What do you have left to do to your max before it's "ready" for summer
#1
What do you have left to do to your max before it's "ready" for summer
Things I have left to do to mine:
1)Exhaust--because I broke my stock exhaust last week
2)Camber bolts--because I went through a set of $800 tires last summer
3)Tires--see number 2
4)Strut mount bearings--because mine are shot
5)Exhaust hangar--because I've had a broken one for like a year now
6)Wash/clean my car--since it hasn't been clean since last fall
7)Hood pins/locks--because my hood flaps around on the highway and looks rediculous.
8)Helmet--because I'll be going to the tracks alot this year
9)Brake rotors--because mine have stress cracks all the way through them.
I think that might be it.
1)Exhaust--because I broke my stock exhaust last week
2)Camber bolts--because I went through a set of $800 tires last summer
3)Tires--see number 2
4)Strut mount bearings--because mine are shot
5)Exhaust hangar--because I've had a broken one for like a year now
6)Wash/clean my car--since it hasn't been clean since last fall
7)Hood pins/locks--because my hood flaps around on the highway and looks rediculous.
8)Helmet--because I'll be going to the tracks alot this year
9)Brake rotors--because mine have stress cracks all the way through them.
I think that might be it.
#10
Get car inspected: Done
Get Transverse links replaced: Done
Get tint repaired: Not done
Get new exhaust: Not done
Get and install xxxxx: Not done
Get shift linkage repaired: Not done, dealer waiting on part
Get and install SAFC-II: Done
Get and install EGT: Not done
Get and install Headers:
Get Transverse links replaced: Done
Get tint repaired: Not done
Get new exhaust: Not done
Get and install xxxxx: Not done
Get shift linkage repaired: Not done, dealer waiting on part
Get and install SAFC-II: Done
Get and install EGT: Not done
Get and install Headers:
#11
Originally posted by SR20DEN
Get car inspected: Done
Get Transverse links replaced: Done
Get tint repaired: Not done
Get new exhaust: Not done
Get and install TURBO: Not done
Get shift linkage repaired: Not done, dealer waiting on part
Get and install SAFC-II: Done
Get and install EGT: Not done
Get and install Headers:
Get car inspected: Done
Get Transverse links replaced: Done
Get tint repaired: Not done
Get new exhaust: Not done
Get and install TURBO: Not done
Get shift linkage repaired: Not done, dealer waiting on part
Get and install SAFC-II: Done
Get and install EGT: Not done
Get and install Headers:
#14
Originally posted by SR20DEN
Don't scrap it. JB IT!! :thumbsup
Been there done that, it works great on aluminum tranny housings. :goofy
Don't scrap it. JB IT!! :thumbsup
Been there done that, it works great on aluminum tranny housings. :goofy
Originally posted by SR20DEN
Get new exhaust with GReddy coffee can muffer so I can be : Not done
Get new exhaust with GReddy coffee can muffer so I can be : Not done
#18
Lets see.
1 Exhaust
2 Custom aluminum dash (Just ordered all the aluminum today )
3 New seat covers
4 New custom trunk
5 Install the Sirius sat equipment (got the stuff from backorder in March, 1 week before the car died)
6 New carpet and floormats
7 (possibly) New from bumper cover
Thats all before summer gets here. This summer I have a couple projects planned. Custom turbo, (maybe. depends on financees) and a custom center dash top DIN sized gauge pod. Also toying with the idea of having it motorized to open out of the dash. we shall see....
1 Exhaust
2 Custom aluminum dash (Just ordered all the aluminum today )
3 New seat covers
4 New custom trunk
5 Install the Sirius sat equipment (got the stuff from backorder in March, 1 week before the car died)
6 New carpet and floormats
7 (possibly) New from bumper cover
Thats all before summer gets here. This summer I have a couple projects planned. Custom turbo, (maybe. depends on financees) and a custom center dash top DIN sized gauge pod. Also toying with the idea of having it motorized to open out of the dash. we shall see....
#20
late summer
tires (like yesterday im rolling on 3 18s and one 15)
put in upper rear bar thats sitting in trunk
cop me a lower sway bar
factory floor mats
1157 bulb
alingment
cv joints
basically i dont mod my car anymore now that is paid off , i just fix the broke stuff
put in upper rear bar thats sitting in trunk
cop me a lower sway bar
factory floor mats
1157 bulb
alingment
cv joints
basically i dont mod my car anymore now that is paid off , i just fix the broke stuff
#23
ugh.. full repaint (damn front bumper keeps losing paint)
install the pile of crap I've been collecting all winter in the garage...
fuel press, EGT, boost gauges..
the hairdryer lookin thing in the garage bolted to the big mass of pipe...
finish 4pt harness on passenger side..
Fidanza flywheel that's serving as a doorstop right now..
replace the MDF crap in the trunk with composites so it's lighter..
finish the rear deck and get the second pair of 12s mounted...
put together and install the 2 piece rotors and fabricate new mounting brackets...
Or did you mean all the stuff I'll actually have time to get done before summer?
uhhhh, wash & wax.
install the pile of crap I've been collecting all winter in the garage...
fuel press, EGT, boost gauges..
the hairdryer lookin thing in the garage bolted to the big mass of pipe...
finish 4pt harness on passenger side..
Fidanza flywheel that's serving as a doorstop right now..
replace the MDF crap in the trunk with composites so it's lighter..
finish the rear deck and get the second pair of 12s mounted...
put together and install the 2 piece rotors and fabricate new mounting brackets...
Or did you mean all the stuff I'll actually have time to get done before summer?
uhhhh, wash & wax.
#31
- New paint and body work
- Wheels
- Install two amps
- 10" sub and enclosure
- Aluminum dash kit
- Leather shift and e-brake boot set
- B&M short shifter
- Tint
- Toying with the idea of replacing my ****ty stillen exhaust
- Getting a replacement R/T cat the insides of mine are loose
Then again I'll probably miss the entire summer. Friggin Saddam, I hope you're dead!
- Wheels
- Install two amps
- 10" sub and enclosure
- Aluminum dash kit
- Leather shift and e-brake boot set
- B&M short shifter
- Tint
- Toying with the idea of replacing my ****ty stillen exhaust
- Getting a replacement R/T cat the insides of mine are loose
Then again I'll probably miss the entire summer. Friggin Saddam, I hope you're dead!
#32
Supporting Maxima.org Member
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Let me see what I have left
install quiafe-done
install alloy flywheel-done
install ME VI-done
Dyno tune-done
clay bar the complete car-done
install stillen brake kit with SS lines not done
go back to the track for a better time other then 13.8
install quiafe-done
install alloy flywheel-done
install ME VI-done
Dyno tune-done
clay bar the complete car-done
install stillen brake kit with SS lines not done
go back to the track for a better time other then 13.8
#33
Modify and install clear corners
fix rims or get new ones
full car wash
maybe do something about the dings on the rear passanger side door
some power adders couldn't help either
fix rims or get new ones
full car wash
maybe do something about the dings on the rear passanger side door
some power adders couldn't help either
#34
-sell the air ride
-sell the air ride
-get the 5speed transmission back from chrome shop
-wait for all the parts to come in the mail
-sell the air ride
-order some new brakes
-replace spindles
-finish up the glassy trunk
-sell the air ride
-and paint time after some turbo
-sell the air ride
-get the 5speed transmission back from chrome shop
-wait for all the parts to come in the mail
-sell the air ride
-order some new brakes
-replace spindles
-finish up the glassy trunk
-sell the air ride
-and paint time after some turbo
#36
-install new rear suspension bushings (COMPLETED)
-wrap all springs completely w/wire wrap (COMPLETED)
-remove front sway bar (COMPLETED)
-new tires (COMPLETED)
-alignment
-get stage I subframe connectors installed
-new rotors/ss lines
-tranny cooler
-drop resistor mod
-wrap all springs completely w/wire wrap (COMPLETED)
-remove front sway bar (COMPLETED)
-new tires (COMPLETED)
-alignment
-get stage I subframe connectors installed
-new rotors/ss lines
-tranny cooler
-drop resistor mod
#38
-wrap the rear h&r: not done
-fix bumpstop squeaking: not done
-claybar & polish the car: not done
-amsoil autotragic:not done
-change spark plugs: not done
-change air filter: not done
-do FSB bushing: not done
-run low 15s@90+: not done
-bi xenon projectors: not done
-new rotors: not done
-fix bumpstop squeaking: not done
-claybar & polish the car: not done
-amsoil autotragic:not done
-change spark plugs: not done
-change air filter: not done
-do FSB bushing: not done
-run low 15s@90+: not done
-bi xenon projectors: not done
-new rotors: not done
#39
Supporting Maxima.org Member
iTrader: (4)
Join Date: Aug 2000
Location: Oklahoma City, OK
Posts: 1,161
Same as last summer......
FINISH TAILLIGHT CONVERSION and finish custom body work
Repaint
1 New Tire
Get a centercap for 1 wheel
finish Nitrous install
finish police strobe install
redo interior
new clutch...again
finish upgrading outdated stereo equipment
thats about it, but this is the exact same list as last year!
Its funny that I went through two different sets of subs to keep up with the new stuff and I never opened any of the boxes.
FINISH TAILLIGHT CONVERSION and finish custom body work
Repaint
1 New Tire
Get a centercap for 1 wheel
finish Nitrous install
finish police strobe install
redo interior
new clutch...again
finish upgrading outdated stereo equipment
thats about it, but this is the exact same list as last year!
Its funny that I went through two different sets of subs to keep up with the new stuff and I never opened any of the boxes.