![]() |
Why doesn't my head light turn on all the way
I have Polarg 9004 bulbs and I just put in the wire harness. It was fine for a few days and then for some reason the passenger headlight only turns on half the way. It's like it's only getting half of the power. I changed bulb but the new bulb still acts the same way. Does anyone have any idea what the problem would be? Is it the harness?
|
turns on half way? explain that do you mean you are only getting low beams and no high beams?
|
Originally posted by SprintMax turns on half way? explain that do you mean you are only getting low beams and no high beams? |
Originally posted by Maximus97 It's like it's only half the power. It turns on, but it's not bright at all. The other light is just fine, I just can't figure it out. It doesn't respond to high or low beams, it just stays really weak! |
You got a bad connection someplace. Perhaps the ground wire is off?
|
Originally posted by njmaxseltd You got a bad connection someplace. Perhaps the ground wire is off? |
I am 100% SURE that you have a poor ground on the passengers side. I had the exact same problem. What you need to do is clean off the ground wire and the place you attach it to. If this does not work then ground the wire somewhere else. The ground wires are critical to headlight performance.
http://www.rit.edu/~aab8398/car/harness/harness4.jpg |
Originally posted by theblue I am 100% SURE that you have a poor ground on the passengers side. I had the exact same problem. What you need to do is clean off the ground wire and the place you attach it to. If this does not work then ground the wire somewhere else. The ground wires are critical to headlight performance. http://www.rit.edu/~aab8398/car/harness/harness4.jpg Do you have the wire harness? I DID put my ground in a crappy place on the passenger side, I am praying that is the problem. Thank you so much for the imput, I will go try to find another place right now. |
Originally posted by Maximus97 Why would the lights work for a little while and then stop performing? |
Originally posted by dko the ground wire could have just slipped off. |
Originally posted by Maximus97 Why would the lights work for a little while and then stop performing? Do you have the wire harness? I DID put my ground in a crappy place on the passenger side, I am praying that is the problem. Thank you so much for the imput, I will go try to find another place right now. |
Bad ground. Find an existing ground bolt.
|
Originally posted by 1MAX2NV Bad ground. Find an existing ground bolt. |
Oh my.... :bawling: My max is not Pebble Beige or Sunlit sand :mad: Back in 1999 when I was looking for my maxima, I wanted a 5 speed. Only found one in the area, it was a Sunlit sand with tan interior. Test drove it and everying but I can't stand having a beige car. Passed on it and settled for an auto "STERLING MIST" with charcoal leather interior.
[QUOTE]Originally posted by dko Hey, 1max2nv, have you seen this thread ? [/QUOTE |
|
Originally posted by theblue the ground wire must be touching or the light will not turn on at all. If you have a loose, bad, or dirty connection then it will be dull. I do have the same harness and I had the exact same problem... I am 100% sure this will fix it unless there is something wrong with your bulb or the harness itself. let us know if this fixed your problem. |
| All times are GMT -7. The time now is 03:26 AM. |
© 2026 MH Sub I, LLC dba Internet Brands