Sticking throttle after TB coolant bypass
09-02-2000, 10:06 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2000
Posts: 2,530
My 97 SE stick has been acting strange once in a while. I did a throttle body coolant bypass, and capped the unused caps on the throttle body. Now, every once in a while, the throttle sticks at 1500 RPM. Wtf is going on here? Anyone else experience something similar?
09-04-2000, 06:59 PM
#3
Guest
Posts: n/a
I was the first to do this mod ->
and the first to un-do it. Put the coolant lines back, guys.
There's a cold idle mechnanism that sticks when the air temperature's below around 65 degrees. I tried adjusting the mechanism but could never get the car to act right. I recommend just putting everything back to stock. There's little gain (if any), anyways.
There's a cold idle mechnanism that sticks when the air temperature's below around 65 degrees. I tried adjusting the mechanism but could never get the car to act right. I recommend just putting everything back to stock. There's little gain (if any), anyways.
Thread
Thread Starter
Forum
Replies
Last Post
05' MaximaMan
6th Generation Maxima (2004-2008)
2
10-08-2017 06:36 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM