New Supplier - New MEVI GD
#42
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Originally posted by Lost_N_a_97Max
So it's $650 for Mevi, cover and install kit...Shipped?
What does it usually cost for installation and what places could do that for me?
So it's $650 for Mevi, cover and install kit...Shipped?
What does it usually cost for installation and what places could do that for me?
Yep, $650 shipped with everything.....
You can do the install yourself...it's not that hard...just get a Chilton's manual and read up on how to remove the manifold, and it's cake from there.
You could also probably find other local .org members to help you.
Everyone I know has done it themselves, so I don't know what labor would be...probably quite expensive, because while it's not mentally hard to do, it does take 6-8 hours the first time you do it.
There's also a decent write-up on how to do it on vqpower.com, I believe.
IanS
#45
Re: New Supplier - New MEVI GD
man, I swear i'm the same size as mtrai, perhaps bigger even. you sure you can take me??? :P
Originally posted by iansw People who have bought MEVI's and received before (use these people as references)
JustMaxin96
SuDz
Iron Lung
Prodeje79
mtrai760 (local to me, and can beat me up)
mrb23 (local to me)
speedtrip
MAXINXS
ToolRocks
2 more spots open! [/B]
JustMaxin96
SuDz
Iron Lung
Prodeje79
mtrai760 (local to me, and can beat me up)
mrb23 (local to me)
speedtrip
MAXINXS
ToolRocks
2 more spots open! [/B]
#47
Supporting Maxima.org Member
iTrader: (14)
Join Date: Dec 2000
Location: Ontario, Canada
Posts: 2,404
I want to get in on this GD as well, but paying now and then having to wait for upto 10 weeks makes me a little uneasy. Is it still a 10 week wait at this point? I am definetly interested in the MEVI + cover + install kit.
Is there any possibility of a local pickup?
Thanks.
Is there any possibility of a local pickup?
Thanks.
#48
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Originally posted by speedemn
I want to get in on this GD as well, but paying now and then having to wait for upto 10 weeks makes me a little uneasy. Is it still a 10 week wait at this point? I am definetly interested in the MEVI + cover + install kit.
Is there any possibility of a local pickup?
Thanks.
I want to get in on this GD as well, but paying now and then having to wait for upto 10 weeks makes me a little uneasy. Is it still a 10 week wait at this point? I am definetly interested in the MEVI + cover + install kit.
Is there any possibility of a local pickup?
Thanks.
Anyway - I can't do any better than that. I don't own Nissan, unfortunately.
I MAY be able to do 50% down now, 50% later, but I'm still waiting to earn my supplier's trust before he'll let me do that.
IanS
#49
Originally posted by speedemn
I want to get in on this GD as well, but paying now and then having to wait for upto 10 weeks makes me a little uneasy. Is it still a 10 week wait at this point? I am definetly interested in the MEVI + cover + install kit.
Is there any possibility of a local pickup?
Thanks.
I want to get in on this GD as well, but paying now and then having to wait for upto 10 weeks makes me a little uneasy. Is it still a 10 week wait at this point? I am definetly interested in the MEVI + cover + install kit.
Is there any possibility of a local pickup?
Thanks.
It's DEFINITELY the best.
#50
Originally posted by AgaricX
You realize ANYTHING that's inported like this will have this sort of waiting period. Do some research on him and see that this is a 100% reliable seller. I did before I put my name on the list. This is about the ONLY way you're going to get a MEVI.
It's DEFINITELY the best.
You realize ANYTHING that's inported like this will have this sort of waiting period. Do some research on him and see that this is a 100% reliable seller. I did before I put my name on the list. This is about the ONLY way you're going to get a MEVI.
It's DEFINITELY the best.
#51
Supporting Maxima.org Member
iTrader: (14)
Join Date: Dec 2000
Location: Ontario, Canada
Posts: 2,404
Originally posted by AgaricX
Do some research on him and see that this is a 100% reliable seller. I did before I put my name on the list. This is about the ONLY way you're going to get a MEVI.
Do some research on him and see that this is a 100% reliable seller. I did before I put my name on the list. This is about the ONLY way you're going to get a MEVI.
Ian, would it be possible to get just an install kit and/or cover right away or is there a long wait for that too?
#52
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Originally posted by speedemn
I know who Ian is and trusting him is not an issue. It is just the fact that I would be dishing a lot of money out and will probably be waiting about 3 months before I even get the unit. I know that is the only option now to get it brand new. But I see a couple of new ones for sale in the classifieds. I might give that a shot so I can get it right away and if that falls through then get in on this.
Ian, would it be possible to get just an install kit and/or cover right away or is there a long wait for that too?
I know who Ian is and trusting him is not an issue. It is just the fact that I would be dishing a lot of money out and will probably be waiting about 3 months before I even get the unit. I know that is the only option now to get it brand new. But I see a couple of new ones for sale in the classifieds. I might give that a shot so I can get it right away and if that falls through then get in on this.
Ian, would it be possible to get just an install kit and/or cover right away or is there a long wait for that too?
I am also still waiting ot hear from Harlan on the RPM Switches....
#53
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Originally posted by iansw
Sorry - I don't sell the cover and kit seperately from the VI at this time.
I am also still waiting ot hear from Harlan on the RPM Switches....
Sorry - I don't sell the cover and kit seperately from the VI at this time.
I am also still waiting ot hear from Harlan on the RPM Switches....
So the kits are now 100% officially for sale to VI buyers.
#55
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Re: Re: New Supplier - New MEVI GD
Originally posted by SupermaxGxe
Count me in! just let me know when you want the money, I'll send it paypal.
Thanks
Chris
Count me in! just let me know when you want the money, I'll send it paypal.
Thanks
Chris
PayPal once locked my account after a bunch of people sent me money when i started the 1st GD for "unexplained amount of transactions". It took me a week to get them to just refund everyone's money....and 20 phone calls and alot of rude CS people.
So if you can avoid PayPal, that would be nice, but not a must.
If you must use PayPal, add $15 for the transaction fee.
Anyway - welcome aboard...you're in!
Do you want the install kit or anything?
1 left!!
IanS
#58
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Originally posted by killamaxima
i going to have to back out on this deal cuase i just spend my money on nos and a cf hood so going to be broke for awhile..sorry u guys plus didn't want to hold the spot up and i could pay..
i going to have to back out on this deal cuase i just spend my money on nos and a cf hood so going to be broke for awhile..sorry u guys plus didn't want to hold the spot up and i could pay..
note to everyone:
After you put your money down, if you want to back out, you'll have to wait until I sell th spot to someone else and receive their money before I can refund you. (Or you could simply sell your spot to someone else yourself)
#62
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Originally posted by FLO_BOY
I know that this is a great mod, but, has anyone done a dyno on this?
just wonderin'
FLO_BOY
I know that this is a great mod, but, has anyone done a dyno on this?
just wonderin'
FLO_BOY
http://www.cyberhub.net/manifold/ - Main page - Dyno is NA with VI on and off
www.cyberhub.net/dyno - various dynos
http://www.cyberhub.net/manifold/speedtrip/ - Speedtrip's dynos - VI not installed vs installed and on.
IanS
#66
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Originally posted by global_threat
Ian...since I can come up to Seattle, are you able to subtract any money for shipping? I will buy you dinner with that money if you wanna lead the install effort
thanks bud
Ian...since I can come up to Seattle, are you able to subtract any money for shipping? I will buy you dinner with that money if you wanna lead the install effort
thanks bud
#67
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Well, it doesn't seem like the other people are going to show up to complete this GD.
So unless someone comes in over the next few days, I'm going to close it down.
I just finished verifying with the supplier that he is able to take orders right now, and I will be asking for money soon. About 1 week.
Whoever is considering getting in on this GD, here's your last chance!
IanS
So unless someone comes in over the next few days, I'm going to close it down.
I just finished verifying with the supplier that he is able to take orders right now, and I will be asking for money soon. About 1 week.
Whoever is considering getting in on this GD, here's your last chance!
IanS
#69
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Great news!!!!
I only need 50% down for this GD for the VI's!!!
However, I need the full amount for the Install Kit so that I can put it together for you guys.
So if you are getting the install kit and the VI with cover (As most of you are) it would be:
$540 * 50% = $270 + $110 = $380 first payment
$270 2nd payment
Total = $650
I will be PM'ing/E-Mailing you each with payment details in a few minutes.
Thanks!
IanS
I only need 50% down for this GD for the VI's!!!
However, I need the full amount for the Install Kit so that I can put it together for you guys.
So if you are getting the install kit and the VI with cover (As most of you are) it would be:
$540 * 50% = $270 + $110 = $380 first payment
$270 2nd payment
Total = $650
I will be PM'ing/E-Mailing you each with payment details in a few minutes.
Thanks!
IanS
#70
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
I have now sent mail to everyone.
If you do not receive your mail, send mail to cyberoptik@cablespeed.com with the following information:
.org name
Full Name
Address
Phone Number
I will then reply back with a Mailing address to send the check/money order to.
Once I receive everyones money, I will place the order.
Thanks!
IanS
If you do not receive your mail, send mail to cyberoptik@cablespeed.com with the following information:
.org name
Full Name
Address
Phone Number
I will then reply back with a Mailing address to send the check/money order to.
Once I receive everyones money, I will place the order.
Thanks!
IanS
#73
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Still waiting on:
AgaricX
maxin
na95gle
SupermaxGxe
Maxobesset
Please contact me to let me know you've sent payment if you have, and let me know when you will be if you have not.
Thanks!
IanS
AgaricX
maxin
na95gle
SupermaxGxe
Maxobesset
Please contact me to let me know you've sent payment if you have, and let me know when you will be if you have not.
Thanks!
IanS
#76
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
Well, everyone is in the process of paying now except for SupermaxGxe, who I have sent 3 E-Mails to with no reply.
If he doesn't respond soon, I'll just take him off the list and move on with it.
IanS
If he doesn't respond soon, I'll just take him off the list and move on with it.
IanS
#79
Supporting Maxima.org Member
Thread Starter
iTrader: (7)
Join Date: Oct 2000
Location: Puyallup WA
Posts: 7,938
SuperMaxGxe - I have attempted contacting you several times with no luck. Everyone has sent payment or at least acknowledged when thay are sending payment except for you. People want to get these ordered. Please respond.
Please contact me by Wednesday, May 21st, or else I will have to drop you from the GD.
Thanks!
IanS
Please contact me by Wednesday, May 21st, or else I will have to drop you from the GD.
Thanks!
IanS