Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   Infiniti I30/I35 (https://maxima.org/forums/infiniti-i30-i35-49/)
-   -   what's a good intake for an i35 (https://maxima.org/forums/infiniti-i30-i35/395352-whats-good-intake-i35.html)

glen305 May 18, 2007 11:35 AM

what's a good intake for an i35
 
i heard cattman or the stillen and a cheaper one from cosmo racing but wasnt to sure

brio_max May 18, 2007 11:56 AM

GAB - FTW. That's what i'm driving with :Popcorn:

NmexMAX May 18, 2007 03:28 PM

PAB -->82mm MAF, --> TB.

anhhuy8 May 24, 2007 08:55 AM

injen cold air from a 2002-2003 maxima.

NmexMAX May 25, 2007 08:42 AM


Originally Posted by anhhuy8
injen cold air from a 2002-2003 maxima.

No, it is not. Please stop spreading misinformation. Until I see IAT's and/or a 3rd party dyno, I am going to disagree with you.

mike9900 May 27, 2007 04:39 PM

I heard that berk makes one and most of the maxima guys perfer it. I know once I own my car a little longer that is what I am going to put on.

The people in the maxima forums say it has a nice low tone to it, and that is what I perfer but it is a matter of preference.

Good luck

sciff5 May 28, 2007 10:13 AM

I'm running the GAB and I like it, even though everytime I pop my hood it looks pretty silly

Nomad May 28, 2007 10:44 AM


Originally Posted by sciff5
I'm running the GAB and I like it, even though everytime I pop my hood it looks pretty silly

In act it doesn't sound that silly while going uphill in 2k-up range. :chebosto:

MR.Large May 28, 2007 04:13 PM


Originally Posted by NmexMAX
No, it is not. Please stop spreading misinformation. Until I see IAT's and/or a 3rd party dyno, I am going to disagree with you.

in essence are you not just s**t talking as well since you cant prove it's not

NmexMAX May 28, 2007 06:39 PM

Same goes for you since you cannot prove it either.


Until I see proof, as I stated in my earlier post, I will stand by my statement.

I've also dynod all of my set-ups and can vouch for each of them. I do not have an Injen, but would be my retirement that any one of my set-ups will make more whp.

j-von Jun 4, 2007 03:20 PM

can someone email me a link where i can get i30 parts i have some work to do to my i30 this summer. my email is jovanjoseph5000@hotmail.com

Bufflomike Jun 4, 2007 03:26 PM


Originally Posted by NmexMAX
Same goes for you since you cannot prove it either.


Until I see proof, as I stated in my earlier post, I will stand by my statement.

I've also dynod all of my set-ups and can vouch for each of them. I do not have an Injen, but would be my retirement that any one of my set-ups will make more whp.


My money is on Nmex. He knows his stuff.

I like my Berk and one of the stickies says the WAI adds 10-13 whp...dyno proven

C P Squared Jun 4, 2007 08:31 PM

im thinking about getting a Stillen Intake. Anyone ever have bad experiences with these

i30ish Jun 4, 2007 09:33 PM

yeah, my wallet is empty

I30FlyHigh Jun 4, 2007 09:45 PM


Originally Posted by i30ish
yeah, my wallet is empty

LOL. I don't see myself payin $180 for a filter. Not me. I havnt decided on which one I am going to go with. Don't really care for the power increase, I drive slow anyways, but I like the sound.

i30ish Jun 4, 2007 10:28 PM

gab that bish

NmexMAX Jun 5, 2007 07:39 AM

Not sure where you are shopping but a Stillen/JWT POP can be found for much cheaper at Courtesy Nissan or the classifieds on here.

:google:

i30ds Jun 5, 2007 08:50 AM


Originally Posted by I30FlyHigh
LOL. I don't see myself payin $180 for a filter. Not me. I havnt decided on which one I am going to go with. Don't really care for the power increase, I drive slow anyways, but I like the sound.

it comes with more than just a filter.

NmexMAX Jun 5, 2007 09:19 AM

That too. :sprint:

If you want just the JWT/Stillen filter, you could call Ben ( :rolleyes: ) @ JWT and get one for 65 shipped. But that filter wont fit on just anything. It's a very large inlet. And it is like that for a reason. It slips onto a semi venturi stack that fits onto your stock MAF. Can't for get the bracket and hose clamp :thumbsup:

Right now I'm trying to see how much power I can squeeze out of this thing using the stock airbox, and stock muffler. :reading::idea:

C P Squared Jun 5, 2007 08:00 PM


Originally Posted by NmexMAX
That too. :sprint:

If you want just the JWT/Stillen filter, you could call Ben ( :rolleyes: ) @ JWT and get one for 65 shipped. But that filter wont fit on just anything. It's a very large inlet. And it is like that for a reason. It slips onto a semi venturi stack that fits onto your stock MAF. Can't for get the bracket and hose clamp :thumbsup:

Right now I'm trying to see how much power I can squeeze out of this thing using the stock airbox, and stock muffler. :reading::idea:

so the Stillens intake dont fit right on an A33 I30?

is it better to get a Cattman or Stillen

i30ds Jun 6, 2007 11:27 AM


Originally Posted by NmexMAX
That too. :sprint:

If you want just the JWT/Stillen filter, you could call Ben ( :rolleyes: ) @ JWT and get one for 65 shipped. But that filter wont fit on just anything. It's a very large inlet. And it is like that for a reason. It slips onto a semi venturi stack that fits onto your stock MAF. Can't for get the bracket and hose clamp :thumbsup:

Right now I'm trying to see how much power I can squeeze out of this thing using the stock airbox, and stock muffler. :reading::idea:

Exactly. Most of the cost of the kit is in the velocity stack that you get... a lot better than just buying an ebay MAF flange and putting a filter with a 3'' inlet on it which I've seen done countless times on this site...

i30ds Jun 6, 2007 11:34 AM


Originally Posted by ZOMG Teh Penorz
so the Stillens intake dont fit right on an A33 I30?

is it better to get a Cattman or Stillen

The Stillen comes with a better bracket than the JWT intake that Cattman sells, but other than that they are identical and function the same.

anhhuy8 Jun 9, 2007 11:04 AM

http://i39.photobucket.com/albums/e1...h14/Image1.jpg

naijai Apr 2, 2008 09:28 AM

dont want to start a new thread i want to get an intake for my I30 and i dont want injen any recommendations

n3985 Apr 2, 2008 10:46 AM

If you like your torque in the low rpms driving around town, then keep the stock airbox. Maybe do the GAB mod for better upper power. GAB DIY steps are all over the 5th gen forum.

CMax03 Apr 2, 2008 03:14 PM

Well,
Someone keeps mentioning Cattman; Brian carries JWT pop filter only now! I'm running an Injen and I picked up 12whp( with stock exhaust system) and I've been rolling with this setup for about 3-4 yrs. Invest in dry filters K&N or Apexi, getting crazy with the oil can kill your MAF sensor. Injen, Fujita look and perform about the same and Berk seems to have good peak power! Running Injen with a Complete Cattman y-pipe,mid pipe and rear muffler section seemed to lose the 3000 rpm roar! But i think with my Cattman headers the intake velocity and exhaust velocity will pick back up and that obvious roar will be back to stay!

NmexMAX Apr 2, 2008 09:28 PM


Originally Posted by CMax03 (Post 6333801)
Well,
Someone keeps mentioning Cattman; Brian carries JWT pop filter only now! I'm running an Injen and I picked up 12whp( with stock exhaust system) and I've been rolling with this setup for about 3-4 yrs. Invest in dry filters K&N or Apexi, getting crazy with the oil can kill your MAF sensor. Injen, Fujita look and perform about the same and Berk seems to have good peak power! Running Injen with a Complete Cattman y-pipe,mid pipe and rear muffler section seemed to lose the 3000 rpm roar! But i think with my Cattman headers the intake velocity and exhaust velocity will pick back up and that obvious roar will be back to stay!

My car doesn't roar, but I like that fact.

moldingking321 Apr 8, 2008 08:17 PM

Frankencar Intake
 
Hey just wanted to know where can i find a frankincar intake for 01 i30

n3985 Apr 8, 2008 08:18 PM

No where, Frankencar is out of business. Yes their website works, but no they don't sell anymore.

moldingking321 Apr 8, 2008 08:18 PM

i seen one a 2002 max today and it looked nice i want one

moldingking321 Apr 8, 2008 08:32 PM

so whats the next best thing?????

NmexMAX Apr 8, 2008 08:40 PM


Originally Posted by moldingking321 (Post 6344359)
so whats the next best thing?????

Do whatever makes you happy.

moldingking321 Apr 8, 2008 08:46 PM

do you have any ideas on that. it would help to know where to start at maybe a site that you know of Thanks

NmexMAX Apr 8, 2008 08:49 PM

This is what I did:
http://forums.maxima.org/showthread.php?t=390691


:D:laugh::D


All times are GMT -7. The time now is 09:21 AM.


© 2026 MH Sub I, LLC dba Internet Brands