Maxima Forums - FS - One of the fastest Maximas around

Maxima Forums (https://maxima.org/forums/)

- Maximas for Sale / Wanted (https://maxima.org/forums/maximas-sale-wanted-4/)

- - FS - One of the fastest Maximas around - Hnda Etr's Evil Max! (https://maxima.org/forums/maximas-sale-wanted/393548-fs-one-fastest-maximas-around-hnda-etrs-evil-max.html)

FS - One of the fastest Maximas around - Hnda Etr's Evil Max!

EDIT: I'm taking the turbo off the car, so that should drop the cost down. If you're looking for a car modded to the hilt, now's your chance.

I'm feeling the urge to get a brand new car, maybe the new G37 when it comes out in a few months, or even the Lexus IS 350.

Blue Book price on my car is a little over $13k. Have less than 53K miles on car.

Looking to get $17Kfor car.

Why so much? Keep reading:

Volk Racing Wheels 18 x 8.5 LE37K $2500 (curb rash – no extra charge)
Stainless Steel Brake Corporation’s Big Brake Kit 13” Front Rotors A168-7 $1000
Stainless Steel Brake Corporation’s Turbo Slotted Rear Rotors $145
Tein Super Street Dampers (coilovers) DSP20-KUSS2 $1200
Tein EDFC unit (remote control of damping) $350
Stainless Steel Brake Lines - $50
Stainless Steel Clutch Line - $30
Blehmco Stage 2 Lower Tie Bar Brace $175
Otto Front Strut Tower Brace $25
Stillen Rear Strut Tower Brace $125
Stillen Rear Sway Bar $200
Watkins Gen 2 Short Throw Shifter (2 piece) $50
Blehmco Engine Grounding Kit $50
Cattman 3” catback exhaust – ONE OF A KIND PROTOTYPE $700
Cattman Fast Cat Catalytic Converter $200
Umnitza DDE’s $125
HID Fog Lights $100
Maxxtuning Front Spoiler – color matched $150 (curb rash – no extra charge)
Stillen Rear Spoiler – color matched $150 (curb rash – no extra charge)
Optima Red Top Battery $150
Non-HLSD 6 speed converted to HLSD $450
Technosquare programming to remove rev limiter and top speed limiter $250
AE Pedals and Sills $100
Hella Horns $50
White Face Gauges with Chrome Rings $50
Jim Wolf Tech Lightened Flywheel $450
Jim Wolf Tech Stage 2 Clutch $450

Only SERIOUS INQUIRIES please. Email me your phone # at royalh13 @ yahoo.com, and I'll call you back to discuss. No PM's please.

the 1st turbo 3.5 for sale :( good luck, i think you are better off parting out, too many cheap *** people out there...

got any pictures of the car?

yeah id like to see pics cuz damn.

yea engine pictures...just because i would like to see this monster

what did it 1/4?

good luck with the sale

Quote:

Originally Posted by MaxiPad'01

yea engine pictures...just because i would like to see this monster

what did it 1/4?

good luck with the sale

ya pics and track times... WOW

Can't believe your selling the beast! I got a ride in this... whew.... every gear ... the only words coming out of my mind was "oh shiet!". Car is beautiful and in great condition.

bump bump bump

bump, sweet car. Can't believe your sellin it

damn man... that's a sweet ride! good luck sellin a modded car tho, most ppl don't want to buy a modded car - if they want to mod the car, they want to do the mods themselves. no offense, just how it is. sounds like a beast... don't sell it! you'll never get all you put into it back. good luck, and +1 on pics! i wish i had the cash to buy this. wanna trade for my '96? lol jk.

hey man.. sick car, i saw you about a month ago at 7pm in studio city, tried to catch up to you on ventura blvd but you were too busy spooling that puppy

can we say fully loaded?!?

wow cant wait to see some pics.

I had heard of this thing during the turbo install I believe with STS I think.... Can't imagine driving the beast. Somebody will be boostin and smilin :)

Quote:

Originally Posted by MaxObesset

got any pictures of the car?

I'll try to get recent pics this weekend... car needs car wash first.

Quote:

Originally Posted by arrrghhh

wanna trade for my '96? lol jk.

Let me think about that for a seco NO... thanks though. lol

Quote:

Originally Posted by VIP Maxima

hey man.. sick car, i saw you about a month ago at 7pm in studio city, tried to catch up to you on ventura blvd but you were too busy spooling that puppy

LOL... sorry... on my way to Killer Shrimp!

1/4 mile time????

You are boosted and only ran a 1/4 mile time of over 14 seconds? 352WHP is a monster. You should have pushed more than that.

Quote:

Originally Posted by HNDA ETR

I'm feeling the urge to get a brand new car, maybe the new G37 when it comes out in a few months, or even the Lexus IS 350.

Blue Book price on my car is a little over $14k. Have less than 49K miles on car.

Looking to get $22K for car. Would need to have about $10K up front, to pay off the loan, then the rest upon delivery.

Why so much? Keep reading:

Volk Racing Wheels 18 x 8.5 LE37K $2500 (curb rash – no extra charge)
Stainless Steel Brake Corporation’s Big Brake Kit 13” Front Rotors A168-7 $1000
Stainless Steel Brake Corporation’s Turbo Slotted Rear Rotors $145
Tein Super Street Dampers (coilovers) DSP20-KUSS2 $1200
Tein EDFC unit (remote control of damping) $350
Stainless Steel Brake Lines - $50
Stainless Steel Clutch Line - $30
Blehmco Stage 2 Lower Tie Bar Brace $175
Otto Front Strut Tower Brace $25
Stillen Rear Strut Tower Brace $125
Stillen Rear Sway Bar $200
Watkins Gen 2 Short Throw Shifter (2 piece) $50
Blehmco Engine Grounding Kit $50
Cattman 3” catback exhaust – ONE OF A KIND PROTOTYPE $700
Cattman Fast Cat Catalytic Converter $200
Umnitza DDE’s $125
HID Fog Lights $100
Maxxtuning Front Spoiler – color matched $150 (curb rash – no extra charge)
Stillen Rear Spoiler – color matched $150 (curb rash – no extra charge)
Defi Exhaust Gas Temperature Gauge $150
Defi Oil Pressure Gauge $150
Defi Fuel Pressure Gauge $150
AEM Uego Wideband O2 Sensor $190
Greddy Profec E-01 Electronic Boost Controller $450
Greddy Turbo Timer $75
Optima Yellow Top Battery $150
Non-HLSD 6 speed converted to HLSD $450
Split Second FTC1-E Piggyback Engine Control Computer $550
Technosquare programming to remove rev limiter and top speed limiter $250
AE Pedals and Sills $100

Custom Turbo Kit - $6000
Includes:
Custom Headers
Custom Downpipe
Custom Crossover pipe
Custom fit Intercooler
T04e Turbo (V-Band, non-bb)
Accel 550 cc injectors
HKS Super SQV Blow off Valve
Tial Wastegate
Custom Cold Air Intake

Produced 352 fwhp with 2.5” exhaust and blown cat converter. Now that I have full 3” exhaust, I’m estimating 375 fwhp (430 bhp?)

All together, $15,990 in goodies!

Turbo system does need tweaking though, to be honest. I can guide you on getting this working though.

Only SERIOUS INQUIRIES please. Email me your phone # at royalh13 @ yahoo.com, and I'll call you back to discuss. No PM's please.

Quote:

Originally Posted by sleeperI35

You are boosted and only ran a 1/4 mile time of over 14 seconds?

Where did he mention his 1/4 mile time??
Bump

Quote:

Originally Posted by jmeister

Where did he mention his 1/4 mile time??
Bump

I've never run 1/4 mile... just a way of excessively pounding the car.

All my proof has been in person ;)

I Have seen this car in person, and I have seen it go too. Lets just say traction in 1st as well as 2nd gear is unatainable! Very clean and proffesional setup. Whoever buys this car will be very happy.

Man the part out alone will cover that 10g loan on the car lmao

Are you thinking about parting it out at all?I've never seen your car it was getting its secret sauce or something at the time.Say Hi to Tony for me.

:wall:.......:wall:.....:wall:

i got a friend whos intrested picssssssss?

I've got a friend who built this car . Someone buy it.

Dirty Engine Bay. Color Matched Engine Cover
http://img.photobucket.com/albums/v2...h/CIMG2449.jpg

Defi Gauges
http://img.photobucket.com/albums/v2...h/CIMG2448.jpg

Greddy Turbo Timer and controller for Greddy Profec E-01 and car wash mat protector ;)
http://img.photobucket.com/albums/v2...h/CIMG2447.jpg

Quote:

Originally Posted by MaxedOut99SE

Man the part out alone will cover that 10g loan on the car lmao

Probably, but it would be a pain in the butt to part out the car and return to stock.

Quote:

Originally Posted by arthur glazier

Are you thinking about parting it out at all?I've never seen your car it was getting its secret sauce or something at the time.Say Hi to Tony for me.

Hey Arthur... not thinking of parting, unless it absolutely won't sell... I'll let Tony know you said hi!

Quote:

Originally Posted by KLOOGY

I've got a friend who built this car . Someone buy it.

Thanks Gio... How's the 'stang? fast yet? ;)

Dibs on the car wash floormat protectors, if you decide to part it out.

(or, free bump)

WOW, nice max man good luck with sale.

Quote:

Originally Posted by HNDA ETR

Thanks Gio... How's the 'stang? fast yet? ;)

Tony and I have some stuff up our sleeves if I keep it. I'm starting off with 297 lbs of TQ as is. :clap:

HO LEE CRAP that thing is so awesome.

That is a beautiful car, free bump

Quote:

Originally Posted by irish44j

Dibs on the car wash floormat protectors, if you decide to part it out.

(or, free bump)

lol.. it's yours, i'll even part it out now for you...