Murdered Out Matte Black 95 Nissan Maxima-
08-11-2012, 10:34 AM
#1
Murdered Out Matte Black 95 Nissan Maxima-
Just had a journey of upgrading my 95 Nissan Maxima..
Have total maintenance bills of possibly $1500.00 So felt It was time to make some changes... Inside... and Outside. Have a few peeps tell me it's Murdered! So let me know. I may post the journey pics later...
Before:
After:
Have total maintenance bills of possibly $1500.00 So felt It was time to make some changes... Inside... and Outside. Have a few peeps tell me it's Murdered! So let me know. I may post the journey pics later...
Before:
After:
08-11-2012, 11:15 AM
#10
08-11-2012, 11:20 AM
#12
i like it... front end looks like an r32/33 gtr and i'm diggin the flat black w/ tan 
BUT you have too much body work with tiny wheels and no drop so it looks weird.
you need 18's and a 2 inch drop. to make it ideal i'd get spacers to get the wheels flush with the fenders.
BUT you have too much body work with tiny wheels and no drop so it looks weird.you need 18's and a 2 inch drop. to make it ideal i'd get spacers to get the wheels flush with the fenders.
08-11-2012, 11:23 AM
#13
i like it... front end looks like an r32/33 gtr and i'm diggin the flat black w/ tan BUT you have too much body work with tiny wheels and no drop so it looks weird.
you need 18's and a 2 inch drop. to make it ideal i'd get spacers to get the wheels flush with the fenders.
BUT you have too much body work with tiny wheels and no drop so it looks weird.you need 18's and a 2 inch drop. to make it ideal i'd get spacers to get the wheels flush with the fenders.
I'm diggin the comments.. keep um coming....
1 thing is that I know nothing about drops... spacers.... Would dropping it cause me to hit the ground more? Already crawling over speed bumps.
08-11-2012, 11:39 AM
#17
dude, you def changed it, you need a drop and 18's like op said. it aint all bad, i'd like to see it with a clear coat and some 350z's on her ( not painted ) and some 35% tint man. not bad so far, just looks half done 
08-11-2012, 12:34 PM
#21
Might want to post a link to it here. ~Post Pics of your Local Ricers~
I think I can hear the 'Troll Army' assembling.
08-11-2012, 12:41 PM
#22
Car needs:
1. lower
2. remove all the hideous 'vents' all over it
3. Debadge
And you have some win. It's still a little ghetto and ricey but it actually has potential. It's different, which can be good, but not with all those vents on it and the 4x4 stance.
1. lower
2. remove all the hideous 'vents' all over it
3. Debadge
And you have some win. It's still a little ghetto and ricey but it actually has potential. It's different, which can be good, but not with all those vents on it and the 4x4 stance.
08-11-2012, 01:30 PM
#24
As much as I hate to say it that car looks like.....
Might want to post a link to it here. ~Post Pics of your Local Ricers~
I think I can hear the 'Troll Army' assembling.
Might want to post a link to it here. ~Post Pics of your Local Ricers~
I think I can hear the 'Troll Army' assembling.
none of those body panels are sitting flush with each other. the whole thing looks halfassed.
08-11-2012, 05:38 PM
#29
I have a turn signal strip that is pretty thin but will go in one of the front bumper air intakes. I'm not 100% on which one/ where... and if I should do some projector fogs... but they should be on hand next week... .I'll start experimenting then.
Your thoughts?
Your thoughts?
08-11-2012, 08:36 PM
#36
you guys are weird... have you seen the ricer thread? this isn't even close to riced out and murdered, maybe just a small flesh wound lol i've seen maxima's with gay altezza's fart cans and giant spoilers, real and glue-on hoodscoops/vents. the only thing thats perhaps ricey is the upper fender vents and a rear bumper diffuser but it somehow fits cause the whole body kit is aggressive.
OP search and go read the how to's and stickies for lowering, tein s-techs are good for a low drop on a budget. i'd suggest that you have AT LEAST good stock struts and that the rest of your suspension is in good shape BEFORE you get them... i'd recommend these 350z rims in original silver
if you're already crawling with the kit over speed bumps then you should've not got the kit and just got coilovers. without the drop the kit will look silly imo. no body kit maxima w/ drop on nice rims looks pretty good too
08-11-2012, 09:20 PM
#37
Not a fan of body kits or fenders at all but it actually doesn't look all the bad in flat black. I'd drop it at least 2 inches. Get some nice 18" wheels with a nice offset.
You should have shaved the door bumpers, power antenna and keyhole in the trunk. I'd debadge it too.
You should have shaved the door bumpers, power antenna and keyhole in the trunk. I'd debadge it too.
that's the same color I want for my datsun 720 
08-12-2012, 07:56 AM
#40
It doesn't look too bad, but I actually like the way it was in the first pic. That and a drop on coilovers and you would have been set IMO. Still, you can make it work by ridding all the Aftermarket bumpers and a big drop