Adjusting stillen camber plates who does it ?
Unscrew the four alan screws and adjust it. It will move, mine did. I just guessed on how close it should be, then had it aligned and it was within spec, so they didn't have to adjust them. You could just have a shop align it and let them do it...
Donating Maxima.org Member
Joined: Aug 2000
Posts: 577
You have to jack the car up to adjust the plates if you want to make it easy on yourself.
Don't unscrew the allen bolts all the way. Just loosen them up; otherwise getting the 4 holes lined up for the screws can be a pain.
As you bring the camber more positive, the toe angle will go out.
Don't unscrew the allen bolts all the way. Just loosen them up; otherwise getting the 4 holes lined up for the screws can be a pain.
As you bring the camber more positive, the toe angle will go out.
Originally posted by chris j vurnis
You have to jack the car up to adjust the plates if you want to make it easy on yourself.
Don't unscrew the allen bolts all the way. Just loosen them up; otherwise getting the 4 holes lined up for the screws can be a pain.
As you bring the camber more positive, the toe angle will go out.
You have to jack the car up to adjust the plates if you want to make it easy on yourself.
Don't unscrew the allen bolts all the way. Just loosen them up; otherwise getting the 4 holes lined up for the screws can be a pain.
As you bring the camber more positive, the toe angle will go out.
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
Dec 20, 2021 06:57 PM
05RLS2
7th Generation Maxima (2009-2015)
4
Apr 14, 2016 11:49 AM