You Wanted It Here It Is Jwt Ecu Gd
You Wanted It Here It Is Jwt Ecu Gd
OK heres the deal 10+ and they are 505 a ECU, you pay shipping to me or jwt(i have to check how they want to do that) and I pay return shipping.
I got this deal through my shop account feel free to call me with questions.
Elevated Bodyworks and Performance
647 east main st
annville pa 17003
717-867-0381
I got this deal through my shop account feel free to call me with questions.
Elevated Bodyworks and Performance
647 east main st
annville pa 17003
717-867-0381
Originally Posted by TILLEYS99
95 and 96 ecus
This is awsome. How much should shipping be, $10? Will they ship these out faster since it is a group deal so you don't have to wait forever if you buy it normally? I gotta check the money issue and figure out what to tell my dad why I want it, any suggestions?
Mooney
YESSSS!!!!!!!!
I should have enough within a week!
I want a 95-96 Auto ECU
Do you think they have a few ECUs ready to go? I would definatly pay the core charge if I could get the ECU faster. I would then simply send them a 95 or 96 ECU in exchange for my $700 back right?
I should have enough within a week!
I want a 95-96 Auto ECU
Do you think they have a few ECUs ready to go? I would definatly pay the core charge if I could get the ECU faster. I would then simply send them a 95 or 96 ECU in exchange for my $700 back right?
Originally Posted by Tyrexx
YESSSS!!!!!!!!
I should have enough within a week!
I want a 95-96 Auto ECU
Do you think they have a few ECUs ready to go? I would definatly pay the core charge if I could get the ECU faster. I would then simply send them a 95 or 96 ECU in exchange for my $700 back right?
I should have enough within a week!
I want a 95-96 Auto ECU
Do you think they have a few ECUs ready to go? I would definatly pay the core charge if I could get the ECU faster. I would then simply send them a 95 or 96 ECU in exchange for my $700 back right?
Originally Posted by 97WhtSE
what happens if u install it on a 97-99 model? Just CEL?
Mooney
I have a 96 ecu in my 98. You get a rear o2 fault code. Even with the pin moved to the correct location on the 96 ECU it still throws the code. I have tried everything to remove this code and I still get it.
Thats the only problem I run into.
Im interested in the deal. Just have to give a few more details on whats is going to happen.
Thats the only problem I run into.
Im interested in the deal. Just have to give a few more details on whats is going to happen.
Could we get a list goin? I'll start it:
1. TILLEYS99
2. JMooney5115
3. BlackMaxGTR
4. abci30
5. Tyrexx
6. Max97Stick
The people on this list showed intrest in it. Add your name if you are in, or if you are on this list and don't want it fix it I guess.
1. TILLEYS99
2. JMooney5115
3. BlackMaxGTR
4. abci30
5. Tyrexx
6. Max97Stick
The people on this list showed intrest in it. Add your name if you are in, or if you are on this list and don't want it fix it I guess.
Originally Posted by h2kSPiG
I have $ and spare ECU in hand. Just let me know the details of money and shipment.
If this goes through what will everyone set their fuel cut at? I am planning on 7500 or 8000 like krismax.
Mooney
I actually got it for free..... kind of. I wrecked my first 96 maxima and took its ECU. I am still in the process of parting it out. You should be able to get it for about $100 or so I would think. Look on www.car-part.com or in the classifieds here. You may want to check local junkyards too.
I am just going to get the 7000 redline and N/A program right now but hopefully later: turbo program
. I would rather not have valve float and not get quite as much range of power than have to change the engine just for something that stupid. Not to insult Krismax or anything but I trust JWT with their tuning history (albeit conservative) over someone on the internet saying "look I did it so it must be ok."
I am just going to get the 7000 redline and N/A program right now but hopefully later: turbo program
. I would rather not have valve float and not get quite as much range of power than have to change the engine just for something that stupid. Not to insult Krismax or anything but I trust JWT with their tuning history (albeit conservative) over someone on the internet saying "look I did it so it must be ok."
I have a 96 auto ecu that has just been sitting collecting dust for 6 months. I have a 98 and no one has ever given a clear response on what wires to switch.
Pm me some offers
tilley-sorry for hoppin on your thread, but it might give you another participant for the GD.
Steve
Pm me some offers
tilley-sorry for hoppin on your thread, but it might give you another participant for the GD.
Steve
Look at some wiring diagrams for the a 98 and a 96, you will see the differences. I tried swaping the pins but it didn't help. Not sure why it didnt help but I only get one code anyway. So for a 96 in a 98 ull get a rear 02 fault and thats it. Thats the only problem I have run into.
OK heres the deal I just got off the phone with ben from JWT whoever wants the ECU done needs to send theres to my shop with return address contact info and year of car you have and trans type also need to know what year ECU your having done (ie 97maxima fed spec but sending a 95 fed ecu) From what it seems it will vary from 2-3 weeks to get done + shipping time. I can except CC, paypal or MO when I receive ECU. I also need to know what redline you want and if its for a boosted app other info is needed like inj size.
Elevated Bodyworks and performance llc
647 east main st
Annville PA 17003
717-867-0381
Elevated Bodyworks and performance llc
647 east main st
Annville PA 17003
717-867-0381
They will not be sent till I have 10 people so PM me if you got the money and a ECU. highly recomend its a spare ECU cause of the volume it probably wont be as quick of service on their part.
wait, am I missing something here? All this talk about the ecu and shipping and core swap, but no mention of the cost of the actual programming. How much excatly are we looking at here if we send in our own ecu to ya tilley?



