First off, I do have to say these are a bit more work than Plug-n-Play.

You have to do a bit of work to make things work with the housing.

Here are the PIX

 

Before, With Piaa Xtreme White



After, With Umnitza HID (6000K) Kit

 

that 3rd pic is hottness!!
-J

 

those do look real sick!!!!! how dificult were they to install?

 

it was easy but as I've said it's no Plug-n-Play

 

WOW... very very nice... on a modding binge lately I see...

 

I have been seriously thinking about putting HIDS in the fogs. When you have your headlights on, how do they look? Compared to the Xtreme White? What do you have in your clearance lights-Polarg?

 

what kind of lights are u using for the lens, are they led's are regualr bulb?

 

how much was the kit?

 

what kind of lights are you using in your clearance lights? those things look really bright

 

can't wait till you crack it, let water get in, and the bulb blows.....no mean for bad luck, but that's what has me not gettin these. i can see it now.....

 

Very nice pics, looks good

 

wow very nice pix..i agree the 3rd pic is hot. What bulbs do you have in the parking lights?

 

way to kill his Happy day marco made in Polska
-J

 

You will be able to help out the police when they have to look for people in lakes... you can be the light... it's awesome though.

 

that looks sick....matchs headlight hids well too....i really wanna kno wat bulbs ur using for the clearance...are they led?

 

I had xtreme white bulbs and got HID fogs a while back. I should have done it sooner. I can see much better at night.

 

I thought that HID bulbs run cooler than halogens. If that's the case, wouldn't his housings have a lower chance of cracking than if he were running stock halogen bulbs? :shurg:

 

no, you are very much wrong. you are thinking the heat caused the glass to crack. that is NOT the case. i'm on my 3rd set of fogs. when the 2nd set cracked, i talked to daveb and mentioned to him that i felt the glass was made too flimsy. he disagreed. months later, i was talking to him again and he mentioned to me how his overwhelming amount of 02-03 fog orders convinced him that there was more than just "high heat". the glass is weak, and one good hit will crack them. believe me, or don't believe me, that's the issue.

 

Polo, did you ever use a protective film for your fogs to see if that would help. I totally agree with you on the issue of the fogs easily cracking just wondering if anyone has done anything to try to protect them especially those who have gone the hid route. I know some org members actually replaced there fogs with those from an Xterra.

 

The fogs look great. I recently got through doing the same MOD. Here are my pics. http://forums.maxima.org/showthread.php?t=361862

 

I have seen that some have put protective 3M tape over the fog glass.

 

So the HID kit isn't that hard to install? I'm thinking of getting a kit for my projectors.

 

For the Clearance/ParkingLights I have a 9 LED bulb (Hyperwhite I think)
The HIDs match the clearance but my stock ones look more yellow now....Time to change those to 6000K

Marco....My foglights have never cracked yet...way so kill my high (not drug related) I think it's because you have the cheap 2k2

 

This is what I have for my Clearance Lights
http://autolumination.com/906.htm <----First one on the page

 

those lights look great. i'm jealous

 

3M 40MIL Clear Urethane. I've had them covered since day 1. No cracks, nicks, chips or problems. With all of the construction here in Atlanta I'd say it works fine. The HID kit has a rubber gromet that fits nicely if the hole is drilled correctly in the back of the fog, that and add a little silicone to be sure and it's water tight!

I love my 5000k HID's but they're a little more blue than the stock HID's.

 

hey polak, i got the same clearance lights, does it look like a small beam of lightto the regular eye???

cuz yours looks much more spread out then mine do, they are extremely bright, just not spread out

 

nice and bright... i like...

 

Check to see if not all of your LEDs are coming up. I had a problem with my wiring harness that made it so that only 2 or 3 of the 9 LEDs came up.

 

the 906's fit w/no problem? the clearance lights are supposed to be 168/194's(samething)

 

i have the 6 LED one.. i might go and buy thte 9 LED ones later cuz they look so much better

 

Damn now I have to go spend more$ on my 2k2 lights. looks awesome!

 

Couple questions....

How much were they?

You said "You have to do a bit of work" What do you mean by work? Is it figiting so that they fit right? Or cutting?

And those are disguestingly sick....I like it!

 

Well the way I did it is I cut the stock harness that you can unplug so i can unplug the HIDs. Then a bit of soldering and drilling.....(the cap on the housing of the fogs needs to have a wider hole so the connectors can fit through) Trust me. Most of this install is common sence....

 

thanks i got my answer form the dirty maximas thread,

your clearance leds look just like mine ( a small flashlight look)

i guess they look better on camera

 

ok I know about the HID fog mod and who ever got them it looks good, but HID clearance light thats just AWSOME!!!!!!!!! good job...............

 

where did you get those cause they look sick as hell and would go very nice with the 12000K kit i just put on!!! and did you say the price previously?

o yeah and by the way i'm a newbie to the maxima forum. i have a 2000 black se.

let me know about that stuff. i'd really appreciate it

 

They were 275 shipped from Umnitza....it's a group deal (i think)

 

What K are they.