heatshields necessary?
dont know if its the same but i have some wrapped around the exhaust piping in different sections. and its all held together with hose clamps of all things. dont know if i need to duplicate with the new exhaust or not for heat.
Originally Posted by Nismotic
have you tried tightening it? I dont think the heat shield is really necessary.
yea, but its all bent in weird directions and since my B-pipe is bigger than stock, it rattles against it. its kinda a PIA to bend into the perfect spot bc theres such little clearance between it and my exhaust in certain parts. as long as it wont torch the car and cause and explosion i think im gonna do it. if its supposed to protect the body from heat - why is it made of metal (an excellent conductor)?
the only heat shield i took off was the one under my shifter. when i installed the short shifter i had to get rid of the heat shield for clearance reasons. but my shifter does get hot after driving for a while since it's right above the cat
i tyook my heat sheilds off cause they were rattling....it stop alot of it and nothing has come out of this that was bad so you should be cool taking them off. mine have been off for almost a years now
Originally Posted by tomservo291
Just don't park over any 1 foot tall dry grass and you're all set...
Some guy who lives 4 houses down from me had his car explode twice b/c he did this. But they were both old buicks. I laugh because he still has a shatty old buick, and still parks on the street.
heat shields are there for a purpose.. i have a whole exhaust switch(headers,cat,bpipe,exhaust) and have the heat shields except the one on the bottom of the cat.... its a preference choice really.. mine dont rattle even with a 15" sub in the trunk. Its called making sure they are SECURE and the screws are tight.
Thread
Thread Starter
Forum
Replies
Last Post
pbn85
5th Generation Maxima (2000-2003)
35
Dec 6, 2012 06:56 AM
NismoVQ
4th Generation Maxima (1995-1999)
5
Apr 17, 2003 04:46 PM
party_boy
4th Generation Maxima (1995-1999)
8
Jul 11, 2002 05:50 PM





