Hi Everyone,

The Power Door Lock stops working. I still hear some clicking sound when I try to use the control button to lock or unlock the doors.

I would be very appreciate for any suggestions or pointers to a troubleshooting or repair guide.

My car is 93 GXE. While I am still able to manually lock and/or unlock each door, the power lock option is really nice and provide some extra safety too.

Thank in Advance.

 

it sounds like you need to solder your door lock time,

when you push the button do you hear any clicking sound coming from under neight,

 

...quite possibly.

See Links for the info, also look this page for door. Theres writeup link for door lock timer soldering...: http://www.cardomain.com/ride/748507/13

 

I think I have the same problem described in the link pointed out above. Same clicking sound. I will give this a try today.

Thanks everyone. Your guys are great.

 

Works like a champ first try. Thanks again for saving me money !!!!!!!!!!!!!!!!!

 

Hey...my power sunroof button will stop working intermittently and I can still here a click, but just no movement. Then after letting it sit for a minute or 2 it decides to work again...could this be the same issue? I own a 91 SE btw

 

doubt it. its probably a slowly decaying motor.

 

I'm having a problem with my rear drivers lock. When I unlock the doors this one just hums in the door. The only way I can open this door is to reach through the drivers door pull on the lock and pull open the door at the same time. Started doing this during the winter. ANy ideas guys?

 

My power door locks on my 93 GXE only work 50% of the time. When they don't work I hear a clicking as well... I'll check out Wiking's link, and see if it works for me... but since my power door locks still work some of the time, I won't know if it really helped (until my locks stop working again).

 

Winter Hummer Inside that door Eats Actuator Alive ...or just needs adj...

 

really? cause when it does work it works fine, it doesnt act like its dying or losing power...i just think that sometimes the button is not hitting the switch or whatever is in there....but if u say so...