Greddy E-manage install write up???
there's really nothing to write about, just have to connect the wires according to greddy's instructions.
greddy "might" come out with new hardware and what not for our engines so the wiring may be a bit different for our cars. we'll find out around january or febuary.
greddy "might" come out with new hardware and what not for our engines so the wiring may be a bit different for our cars. we'll find out around january or febuary.
I am working on an install for the 4th Gen, basically a colored line diagram showing the ECU and all wires connecting to the EU similar to what I did for the S-AFCII.
Here is a sample. When I get it finished I will post for the guys who have already installed to check for errors. Like Mingo said its just connecting according to instructions but I think this may help.
PS The finished one will be much larger so its easier to read.
Here is a sample. When I get it finished I will post for the guys who have already installed to check for errors. Like Mingo said its just connecting according to instructions but I think this may help.
PS The finished one will be much larger so its easier to read.
You can have diagrams, pictures and video's and still get asked for help so I'm going to try and make it Jime proof.
If you wouldn't mind Dan I would appreciate you taking a look after I'm finished to make sure I didn't mess up too bad, I hate giving out bad info.
If you wouldn't mind Dan I would appreciate you taking a look after I'm finished to make sure I didn't mess up too bad, I hate giving out bad info.
Originally Posted by Jime
You can have diagrams, pictures and video's and still get asked for help so I'm going to try and make it Jime proof.
If you wouldn't mind Dan I would appreciate you taking a look after I'm finished to make sure I didn't mess up too bad, I hate giving out bad info.
If you wouldn't mind Dan I would appreciate you taking a look after I'm finished to make sure I didn't mess up too bad, I hate giving out bad info.
Just for fun here's my chicken-scratch pinout I did before beginning the EU install (I think I posted this somewhere on the long EU thread too): lol
they made my life 10 times easier 
Supporting Maxima.org Member
Joined: Nov 2000
Posts: 1,275
5th Gen Pin-outs
I'd love to do this for the 5th Gens.... If only I knew how. I have e-manage but I left the install and tuning to my mechanic. I actually need help now to get my EU installed and take my E-Blue out.
That pin-out diagram would definately help w/that.
Deac
That pin-out diagram would definately help w/that.
Deac
Wish I had these when I installed my Emanage Blue. lol
Very nice work Dan & Jim.
Not to hijack, but Jim, do you have all these little diagrams and charts you do linked off your website? I was looking for the one you did of the dry nitrous jet sizes but couldn't find it.
Very nice work Dan & Jim.
Not to hijack, but Jim, do you have all these little diagrams and charts you do linked off your website? I was looking for the one you did of the dry nitrous jet sizes but couldn't find it.
Originally Posted by Zero-K
Wish I had these when I installed my Emanage Blue. lol
Very nice work Dan & Jim.
Not to hijack, but Jim, do you have all these little diagrams and charts you do linked off your website? I was looking for the one you did of the dry nitrous jet sizes but couldn't find it.
Very nice work Dan & Jim.
Not to hijack, but Jim, do you have all these little diagrams and charts you do linked off your website? I was looking for the one you did of the dry nitrous jet sizes but couldn't find it.
I believe its called jet.jpg
Originally Posted by Jime
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: Emanage Ultimate and plug/play Harness
knight_yyz
General Maxima Accessories (All Generations)
2
Nov 6, 2015 02:34 PM
CAN-Toronto FS: E-Manage Ultimate and patch cable
knight_yyz
5th Generation Classifieds (2000-2003)
3
Oct 24, 2015 08:05 AM